There still is a limitation in the usage of 3D clothes model in the production line due to the lack of compatibility between 3D modeling software, and its accurate 2D pattern making software, especially for free formed dress with tight fitted zone and draped part. In this study, obstacles in the 3D direct dress design process was overcome by solving the compatibility among each step of 3D virtual design process as well as adopting 3D-2D direct pattern development program called 2C-AN. Efficacy of making 2D pattern from 3D dress design using 2C-AN program developed by the authors was examined during the course of actual dress making process. Accurate ease over the fitted dress part was examined by 3D scanning technology, and the actual appearance of the draped part was compared with the simulation image of dress model. It was confirmed that the entire 3D design process and direct 2D pattern development proposed in this study was accurate enough to use in the 3D design process.
주얼리 제품에서 마스터패턴 제작비는 최종제품의 20% 정도로 전체 주얼리제품 시장에서 매우 큰 비중을 차지한다. 기존 주얼리 제품을 제작하는 일반 공정인 ‘디자인 시안→상세도면 제작→1왁스형 제작→석고 플라스크 제작→은 마스터패턴의 제작→왁스패턴의 대량생산→정밀주조→최종제품’의 복잡한 단계를 ‘CAD 디자인 시안→쾌속조형기 듀라폼 음각몰드 제작→저융점 합금으로 마스터패턴 제작→정밀주조→최종제품’의 공정으로 단순화하면서도 대폭시간을 단축할 수 있는 신공정을 제안하였다. 주요공정인 selective laster sintering (SLS)형 쾌속조형기(rapid prototype: RP)를 이용해서 분해온도가 190℃인 듀라폼 분말로 미리 3D CAD로 설계한 직경 20mm의 구, 링 요소를 각각 상하형의 합체형 몰드와 일체형 몰드로 제작하였다. 제작된 몰드에 융점이 70℃인 Pb-Sn-Bi-Cd 저융점 합금을 주입하여 마스터패턴을 제조하였다. 완성된 마스터패턴은 목표형상에 비해 치수 변형율이 2% 이내로 우수하고 주입공정 및 후가공공정이 용이하여 주얼리용 마스터패턴으로 응용이 가능하였다.
Journal of the Korea Society of Computer and Information
/
v.25
no.5
/
pp.117-126
/
2020
In this study, a 3D simulation program was used to produce a bodice prototype of a middle-aged male in their 40s and 50s and then analyze the appearance evaluation and airgap, sectional view, color distribution through virtual wearing to compare and analyze the differences between patterns. Through this, it was intended to provide basic data necessary for pattern development to companies that manufacture and produce clothing for middle-aged men. As a result of analyzing, J pattern was analyzed as the most suitable body shape pattern for middle-aged men. E pattern was too tight and L pattern and N pattern had too much spaces. However, J patternt was analyzed that correction was necessary in setting center back and center front length. The aging phenomenon in which the back is slightly bent forward and shoulders are also inclined is expected to appear, so it is necessary to adjust the front-to-back length, shoulder angle, and shoulder length. It is considered that after developing the research pattern by modifying J pattern, it is necessary to develop a body shape prototype for middle-aged men through actual clothing experiments on middle-aged men.
Journal of the Korean Society for Precision Engineering
/
v.23
no.8
s.185
/
pp.203-210
/
2006
This paper focuses on the development of RT technology suitable for manufacturing a small quantity of metal prototype of a precise part from an RP master. Dimensional accuracy and surface roughness are evaluated from Thermojet part of a 3D printer, and effective post-processing method is introduced. Investment casting is done using a prototype built from 3D printer as a wax pattern. Ceramic shell investment casting technique is developed to build a prototype with materials mostly wanted. Also, experimental result shows this research is very useful in manufacturing of a small quantity of functional part or a test part of a specific material.
본 논문에서는 기존 패턴캐드시스템 및 드레이핑시스템을 이용한 의복제작과정의 한계점과 개선가능성에 대해 알아보고, 이를 기반으로 새로 디자인한 의복제작시스템을 소개한다. 이 시스템은 원피스, 바지, 셔츠, 재킷 등 옷의 큰 스타일인 의복템플릿으로부터 의복디자인을 시작 한다. 소매, 카라, 포켓, 넥라인과 같은 템플릿 디테일들은 디자이너가 마음대로 다른 세부 템플릿들과 교체할 수 있으며, 세부 템플릿으로 커버할 수 없는 디테일한 수정은 3D 드레이핑 시스템과 2D패턴에디터에서의 직관적인 오퍼레이션을 통해 이루어진다.
We fabricated a-Si:H thin-film solar cell using the two-dimensional (2D) periodic patterned glass substrate. The use of a 3D periodic texture rather than a randomly texture at surface of TCO can result in higher short circuit current densities ($J_{sc}$). In order to analyze the optical effect of patterning glasses, ray-tracing simulations were performed. Also, p-i-n cells were deposited on patterned glasses as substrate by PECVD. UV-Vis spectroscopy, light I-V measurement were carried out for the optoelectronic characterization. The anti-reflective and light-trapping performance of patterning glass substrate was investigated by a comparison of experimental results with numerical simulations.
Proceedings of the Korean Society of Precision Engineering Conference
/
2004.05a
/
pp.128-128
/
2004
나노 스케일의 구조물 제작에 있어서 기존의 리소그래피 공정들이 가지는 한계점을 극복하기 위해서 다양한 방식의 새로운 공정들이 개발되고 있다. 특히, 기계-화학적 가공공정을 이용한 미세탐침 기반의 나노리소그래피 기술(Mechano-Chemical Scaning Probe based Lithography; MC-SPL)은 기존의 포토리소그래피 공정의 단점을 극복하고, 보다 경제적이며 패턴 디자인 변경이 유연한 미세 패턴 제작 기술임이 확인되었다.(중략)
The Journal of the Korea institute of electronic communication sciences
/
v.8
no.9
/
pp.1285-1291
/
2013
In this paper, a double circular ring monopole antenna for wideband applications is designed and fabricated. The proposed antenna is based on a planar monopole design, and composed of double circular ring of radiating patches and ground plane to obtain the wideband characteristics. To get the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that effect antenna characteristics. Using the obtained parameters, the proposed antenna is fabricated. The fabricated antenna is measured at the operating frequencies, and the return loss coefficient, gain, and radiation patterns are determined. The results of measurement, -10dB impedance bandwidth, measured return loss is 4,530 MHz(2,510-7,040 MHz) and antenna peak and average gains for the frequencies are obtained 0.71~3.38 dBi, -3.85~0.3 dBi, respectively. In case of radiation patterns, the proposed antenna displays nearly omnidirectional radiation characteristics in the E-plane, and monopole-like radiation pattern characteristics in the H-plane.
Journal of the Korean Society of Clothing and Textiles
/
v.26
no.12
/
pp.1694-1700
/
2002
본 연구는 염색 과정 중에 발생하는 수질오염을 줄이고 또한 홀치기 염색기법에 의해 제작된 패턴을 모티브로 하여 수작업에서 얻지 못한 다색 의 사용을 가능케 함으로써 새로운 느낌 의 홀치기 문양 표현과 3D 모델링을 통하여 텍스타일디자인이 상품화 되었을 때의 효과를 CAD를 이용하여 살펴보고자 한 것이다. 연구방법으로는 가장 일반적인 실로 묶기, 전통적인 손바느질 느낌이 나는 시침질, 현대적 느낌이 강한 깡통에 의한 묶기와 기하학적 효과가 나는 접기 등의 홀치기염색 기법으로 수작업 한 다음 CAD를 이용하였다 연구의 결과는 다음과 같다. 첫째, 홀치기염색기법에 의해 제작된 패턴을 모티브로 하여 수작업에서 얻지 못하는 다색사용가능성이 주메뉴의 색정리, 색4전개, 색 바꾸기를 사용함으로써 가능하였다 둘째, 다양한 색을 얻기 위해서 홀치기염색의 수작업에서는 상당한 시간과 노력을 필요로 하지 만 CAD를 사용함으로써 이러한 작업 이 몇 가지 메뉴의 사용으로 짧은 시간 내에 쉽게 이루어질 수 있었다. 셋째, CAD를 통한 홀치기 염색패턴의 새로운 이미지 효과를 얻기 위해 Solarize와 Intensity Direct, Effect/Emboss를 사용함으로써 다양한 질감과 새로운 이 미지 의 홀치기염색패턴을 얻을 수 있었다. 넷째, 위의 작업 과정을 통하여 수작업에서 발생 하는 수질오염을 줄일 수 있었다. 다섯째, 이상에서 얻어진 염색패턴을 3D모델링을 통하여 상품의 제작과정과 소비자에게 착용되었을 때의 효과를 미리 볼 수 있음으로 인해서 생산자의 실패율을 줄여줄 수 있을 것으로 본다 여섯째, CAD를 이용한 이러한 일련의 과정들이 텍스타일산업 분야에 충분히 기여 할 수 있을 것으로 기대 된다.
Proceedings of the Korea Contents Association Conference
/
2019.05a
/
pp.371-372
/
2019
금속 3D 프린팅의 응용분야는 자동차, 우주항공, 의료/헬스, 전자기기, 금형 등으로 분류할 수 있다. 최근 들어 선진국을 중심으로 아크 용접기반 금속 3D 프린팅 기술의 연구개발이 활발히 진행되고 있다. 3D 프린팅 기술은 CAD 설계 정보를 이용한 적층 제조방식이기 때문에 내부 형상이 아무리 복잡하여도 제작이 가능하고, 디자인이 변경되더라도 별도의 금형 제작 없이 제작이 가능하다는 장점이 있다. 와이어 아크기반 금속 3D 프린팅 기술은 차세대 생산제조 핵심기술로 발전할 전망이다. 금속 3D 프린터의 기술경쟁력 제고를 위해서 적층패턴, 와이어정밀 송급 및 적층품질 실시간 모니터링 등의 시스템 제어 기술과 대형 금속부품의 고생산성을 위한 적층가공 시스템 기술개발이 진행될 것으로 예상된다. 금속 와이어 아크를 이용한 대형 3D 프린팅 시스템의 지식재산권 확보 전략을 수립하기 위해 대형 3D 프린터 기술, 금속 와이어 3D 프린터 기술, 아크 3D 프린터 기술의 세 가지 분야에 대한 특허동향 분석을 수행하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.