• Science of Emotion and Sensibility
• /
• v.20 no.2
• /
• pp.87-102
• /
• 2017

With increasing interest in 3D printing, the interest in the 3D modelling training that should precede the 3D printing is increasing. However, the existing 3D modelling software is developed mostly by foreign brands. Thus, the interfaces are all in English. 3D modelling software training for Korean novices who are not familiar with these terms has constraints. This study aims to explore what to consider when developing a Korean model for 3D modelling educational software for 3D printing in the face of such reality. For this goal, after having novices with no experience in 3D modeling to perform a house building task using either 12D Design or Tinker CAD, we conducted a survey. It was found in the result that more users favored Tinker CAD over 123D Design, and the errors involved while working with the Tinker CAD were less than those with the 123D Design, and the ratio of people who completed the task with the Tinker CAD was higher than that with the 123D Design. In general discussion, an introductory level educational 3D modeling software development is proposed which utilize characteristics of Tinker CAD (easy modelling is possible by three-dimensional figures) and web-based method. Also, a beginner/intermediate level educational 3D modeling software development is proposed which utilize characteristics of 123D Design (with finer measurement manipulations and figure alignment) and Windows-based method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.2
• /
• pp.304-310
• /
• 2020

The technology in 3D modelling have advanced not only maps, heritages, constructions but also trees modelling. By laser scanning(Faro s350) and photogrammetry software(Pix4d) for 3D modelling, this study compared with real coniferous tree and both technology's results about characteristics of shape, texture, and dimensions. As a result, both technologies all showed high reproducibility. The scanning technique showed very good results in the reproduction about bark and leaves. Comparing the detailed dimensions on it, the error between the actual tree and modelling with scanning was 1.7~2.2%, and the scanning result was larger than the actual tree. The error between the actual tree and photogrammetry was only 0.2~0.5%, which was larger than the actual tree. On the other hand, the dark areas's modelling was not fully processed. This study is meaningful as a basic research that can be used for tree DB on BIM for the landscape architecture, landscape design and analysis with AR technology, historical tree and heritage also.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.2
• /
• pp.151-157
• /
• 1996

This study, experimentally, aims at presenting the methodology to construct an efficient digital terrain by com-paring and analyzing the accuracy among the existing Digital Terrain Models, develope 3-D fractal terrain model-ling program by applying digital algorithm of fractal geometry and using turbo pascal, and lastly perform basic research on constructing GSIS-based 3-D fractal terrain modelling system by integrating a PC-based GSIS Pack-age and the 3-D fractal terrain modelling program developed by this paper. The results are as follows -First, the method to produce TIN(Triangulated Irregular Network) by the combination of point data and line data was showed as an alternative to construct efficient Digital Terrain Model. Second, developing GSIS-based 3-D fractal terrain modelling system, applying fractal geometry is the basic research in developing the new terrain modelling method. also, this study presented the possibility of 3-D terrain modelling with the use of fractal.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.291-298
• /
• 2004

Effective 3 dimensional modelling is to be essential work for design of construction, mechanic and industrial part. Especially, it makes possible for reverse design. It need rapidity, accuracy, reality. Data acquisition method for modelling are contact 3dimensional measurement system, LASER scanner, Pattern scanner, and digital photogrammetry. This study introduce to 3 dimensional modelling methods and analysis of these method. We tried to 3D modelling of automobile part using OPTO-Top pattern scanner which system have rapidity and accuracy, and compared effectiveness of each method. The 3D display web environment was made.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12C
• /
• pp.995-1003
• /
• 2010

The content-based hashing for authentication and copy protection of image, video and 3D model has to satisfy the robustness and the security. For the security analysis of the hash value, the modelling method based on differential entropy had been presented. But this modelling can be only applied to the image hashing. This paper presents the modelling for the security analysis of the hash feature value in 3D model hashing based on differential entropy. The proposed security analysis modeling design the feature extracting methods of two types and then analyze the security of two feature values by using differential entropy modelling. In our experiment, we evaluated the security of feature extracting methods of two types and discussed about the trade-off relation of the security and the robustness of hash value.

• Tunnel and Underground Space
• /
• v.24 no.2
• /
• pp.131-142
• /
• 2014

This study is using electronic-delay system detonator which can input an accurate detonating delay, compare predicted blasting vibration level derived from vibration 3D modelling with real measured blasting vibrations, and then considered modelling results are able to apply blast design. It confirmed there are certain relations between modelling and real vibration data, so modelling prediction method also can be apply design various blast conditions and prediction equation of blast vibration.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.562-566
• /
• 1988

The purpose of this study is to develop a personal computer aided 3-D geometric modeller. To perform this study, we set up a cube, a cylinder, and a prism as a primitive in the first segment of this study. By modelling the 3-D object through their transformation, addition, and subtraction, we proved the validity of the developed algorithm and its computer program. Some examples show the results of applying the program to modelling a few simple shape of the machine parts. These results met the first aim of this study.

• Nuclear Engineering and Technology
• /
• v.41 no.2
• /
• pp.187-198
• /
• 2009

In this paper, three power ramp tests performed on high burn-up Re-crystallized Zircaloy2 - UO2 BWR fuel rods (56 to 63 MWd/kgU) within the SCIP project are simulated with METEOR and ALCYONE 3D. Two of the ramp tests are of staircase type up to Linear Heat Rates of 420 and 520 W/cm and with long holding periods. Failure of the 420 W/cm fuel rod was observed after 40 minutes. The third ramp test consisted of a more standard ramp test with a constant power rate of 80 W/cm/min up to 410 W/cm with a short holding time. The tests were first simulated with the METEOR 1D fuel rod code, which gave accurate results in terms of profilometry and fission gas releases. The behaviour of a fuel pellet fragment and of the cladding piece on top of it was then investigated with ALCYONE 3D. The size and the main characteristics of the ridges after base irradiation and power ramp testing were recovered. Finally, the failure criteria validated for PWR conditions and fuel rods with low-to-medium burn-ups were used to analyze the failure probability of the KKL rodlets during ramp testing.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.3
• /
• pp.254-262
• /
• 2015

This paper presents 3D collision deformation modelling methodologies using photogrammetry for reconstruction of vehicle accidents. A vehicle's deformation shape in collision provides important information on how the vehicle collided. So effective measurement(scanning) and construction of a corresponding appropriate model are essential in the analysis of collision deformation shape for obtaining much information related to collision accident. Two measurement methods were used in this study: Indirect-photogrammetry which requires relatively small amount of photos or videos, and direct-photogrammetry which requires large amount of photos directly taken for the purpose of 3D modelling. When the indirect-photogrammetry method, which was mainly used in this study, lacked enough photographic information, already secured 2D numerical deformation data was used as a compensation. This made 3D collision deformation modelling for accident reconstruction analysis possible.

• Journal of the Korea Furniture Society
• /
• v.10 no.2
• /
• pp.79-86
• /
• 1999

본 연구는 국내가구 디자인 산업의 경쟁력 강화를 위한 사례의 하나로 디자인 작품을 시도하게 되었다. 지존의 디자인 모델링은 소프트 모델 또는 목업(mock up)개념에서 시행되어 디자이너가 직접 제작하기 전에는 3차원의 형상을 구현하기가 어려웠으며, 더욱이 문야의 적용은 실크스크린 또는 인쇄와 같은 처리기법으로 사용되었다. 이 방법은 시간, 경비, 공간, 자료의 보관 및 축적, 기타의 많은 문제점과 생산성 향상에 애로사항이 되어왔다. 요지와 같이 많은 문제점과 렌더링의 데이터베이스 뱅크는 활용 가능한 분야와 직종에 따라서 응용 가능하기 때문에 많은 실험적 시도가 요구된다. 디자인의 발상은 우리나라 전통문화의 가구디자인을 접목시킨 사례로서 시도하였으며, 형태와 문양을 현대적 개념에서 재해석하여 대입시켰다. 적용디자인 사례는 2개의 모델에 10가지의 패턴을 복합적으로 활용한 디자인 작품의 결과물이다. 이러한 결과는 다양한 디자인 연출과 시안을 추출할 수 있으며, 디자인 활동과 설계에 능률을 배가시키는 효과를 검증할 수 있겠다.