• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.188-193
• /
• 2004

3D spatial-modeling can be used in various safety-enhancement applications and for as-built data acquisition in project-control systems. The objective of the research reported herein was to provide spatial-modeling methods that represent construction sites in an efficient manner and to validate the proposed methods by testing them in an actual construction environment. Algorithms to construct construction-site scenes and to carry out coordinate transformations in order to merge data from different acquisition locations are presented. Field experiments were conducted to establish performance parameters and validation for the proposed methods and models. Initial experimental work has demonstrated the feasibility of this approach.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.909-914
• /
• 2007

Today's dynamic nature of the construction environment requires management systems to be active enough to take real-time decisions. For real-time decision making, effective 3D spatial information acquisition is imperative. Various 3D data acquisition technologies are being developed and tested for 3D spatial information acquisition and its use for wide range of areas in the construction industry, however, there are shortcomings in these technologies. The major problems are long processing time and high cost which make current technologies impossible to be used for real-time applications. Laser-based Flash LADAR that illuminates the entire scene with diffuse laser light is comparatively fast and cost effective, therefore it is well suited for 3D spatial modeling of dynamic environment on a construction site. This paper presents experimental results to evaluate the performance of flash LADAR and discuss issues of applicability of Flash LADAR to 3D spatial modeling on a construction site.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.173-179
• /
• 2003

Techniques to rapidly model local spaces, using 3D range data can enable implementation of: (1) real-time obstacle avoidance for improved safety, (2) advanced automated equipment control modes, and (3) as-built data acquisition for improved quantity tracking, engineering, and project control systems. The objective of the research reported here was to introduce current rapid local modeling techniques and develop rapid local spatial modeling tools.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1177-1179
• /
• 2003

Recently, the ground-based laser profiler is used for acquisition of 3D spatial information of a rchaeological objects. However, it is very difficult to measure complicated objects, because of a relatively low-resolution. On the other hand, texture mapping can be a solution to complement the low resolution, and to generate 3D model with higher fidelity. But, a huge cost is required for the construction of textured 3D model, because huge labor is demanded, and the work depends on editor's experiences and skills . Moreover, the accuracy of data would be lost during the editing works. In this research, using the laser profiler and a non-calibrated digital camera, a method is proposed for the automatic generation of 3D model by integrating these data. At first, region segmentation is applied to laser range data to extract geometric features of an object in the laser range data. Various information such as normal vectors of planes, distances from a sensor and a sun-direction are used in this processing. Next, an image segmentation is also applied to the digital camera images, which include the same object. Then, geometrical relations are determined by corresponding the features extracted in the laser range data and digital camera’ images. By projecting digital camera image onto the surface data reconstructed from laser range image, the 3D texture model was generated automatically.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1152-1154
• /
• 2003

The needs of 3-D data have been increasing for various applications like visualization, 3-D modeling, planning and management as well as entertainment. Mobile mapping has become a quick and practical means for acquiring necessary 3-D data for above-mentioned applications. A mobile mapping system mainly consists of two main components, viz. data acquisition devices and positioning devices. The data acquisition devices consist of CCD cameras or/and laser scanners. The positioning devices consist of GPS, INS, Odometer (shaft encoder) and some other referencing devices. The overall accuracy of mobile mapping system depends on the accuracy of positioning devices and their integrated output. Though, GPS is the main input device for the position information, the signal is not available for the computation of position all the times in urban area. The GPS satellites are normally obstructed by high-rise buildings. Thus it is very important to understand the accuracy of such a system in different environments and means to solve such problems. We have developed a mobile mapping system called VLMS (Vehicle-borne Laser Mapping System), which consists of CCD Cameras, Laser scanners, GPS, INS and Odometer. In this paper, we will present and discuss the accuracy of this system with data acquired in different environments (open area, urban area, tunnel, express way etc) by analyzing the data with respect to other existing digital data.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.415-422
• /
• 2013

The contents development for the Internet and cyber tour has been attempted in a number of areas. 3D topography of the spatial environment, land planning and land information contents as a 3D tour of the future ubiquitous city safe for tourism due to the implementation of information made available major area. Domestic service, and in urban areas of the country where land and precise spatial information in order to shoot satellites and aircraft in the area you want to mount the camera on a variety of photo images taken by conducting 3D spatial that is required is able to obtain the information. Geo spatial information in a variety of direct or indirect acquisition of the initial spatial data into a database for accurate collection, storage, editing, manipulation and application technology changes in the future by establishing a database of 3D spatial by securing content organization ubiquitous tourist to take advantage of new tourism industry was greatly. As a result of this study for future tourism using geo spatial information and analysis of 3D modeling by intelligent land information indirectly, with quite a few stereo site experience and a variety of tourist spatial acquisition and utilization of information could prove.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.2
• /
• pp.71-78
• /
• 2016

After the 'Guidelines for the preservation of digital heritage' were published by UNESCO, interests in the fabrication of digital cultural heritage have been increasing throughout the world. The present study was intended to fabricate digital cultural heritages for existing cultural properties using the reverse engineering technology and obtain two-dimensional drawings. Jinju Castle Gongbukmun, which is a cultural property, was selected as a study subject and 3D modeling of Jinju Castle Gongbukmun was conducted by implementing 3D scanning and processing the point cloud data. Using the Gongbukmun 3D model (3D-Gongbukmun) made as such, requirements as a digital heritage were reviewed and 2D drawings of Gongbukmun such as front views, ground plans, and side views could be prepared.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.6
• /
• pp.669-676
• /
• 2010

Visualization requires for effective analysis of the spatial data collected by various sensors. The best way to convey 3D digital spatial information which is modeling of the real world to the users, realistic 3D visualization and display technology. Since most of the display is based on 2D or 2.5D projection to the plane, there is limitation in representing real world in 3D space. In this paper, data from airborne LiDAR for topographic mapping, Flashi-LiDAR as emerging sensor with great potential to 3D data acquisition, and multibeam echo-sounder for underwater measurement, were stereoscopically visualized. 3D monitors are getting popular and could be information media and platform in geoinformatics. Therefore, study on creating 3D stereoscopic contents of spatial information is essential for new technology of stereo viewing systems.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.1 s.11
• /
• pp.65-74
• /
• 1998

The acquisition and analysis system of accurate geometrical digital data is very important in side of maintaining the traditional culture for the preservation of cultural properties. This study is on the construction and shape analysis of precise digital data to manage more successfuly using the CRP method and 3D Mono Mobile System. Also this study could acquisite 3D geometrical digital data, make such various space analysis and section, projection, and calculation of bias, area and volume and modeling by rendering technique on the misterious bell of great king of SungDuck, one of the greatest bells in periods of TongIl Silla. So, We suggest utilization of image analysis method to safety diagnosis for the maintenance of cultural properties, archeological and artistic research.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.70-81
• /
• 2001

This paper presents a 3D face modeling method using a CCD camera and a projector (LCD projector or Slide projector). The camera faces the human face and the projector casts white stripe patterns on the human face. The 3D shape of the face is extracted from spatial and temporal locations of the white stripe patterns on a series of image frames. The proposed method employs region segmentation and multi-beam techniques for efficient 3D modeling of hair region and faster 3D scanning respectively. In the proposed method, each image is segmented into face, hair, and shadow regions, which are independently processed to obtain the optimum results for each region. The multi-beam method， which uses a number of equally spaced stripe patterns, reduces the total number of image frames and consequently the overall data acquisition time. Light beam calibration is adopted for efficient light plane measurement, which is not influenced by the direction (vertical or horizontal) of the stripe patterns. Experimental results show that the proposed method provides a favorable 3D face modeling results, including the hair region.