• 제목/요약/키워드: 3D pattern production

검색결과 182건 처리시간 0.022초

20~30대 저체중 성인여성의 토르소원형 설계 - Clo 3D 프로그램 적용 사례 - (Development of Torso Pattern for Underweight Female in their 20s~30s - Using Clo 3D program -)

  • 임지영
    • 한국의류산업학회지
    • /
    • 제15권6호
    • /
    • pp.963-970
    • /
    • 2013
  • The purpose of this study was to develop torso pattern of underweight female in their 20s~30s by using Clo 3D virtual garment simulation system. The results were as follows; first, as a result of analyzing torso somatotype, underweight women showed lower average than average values of whole women in their twenties and thirties in the items such as length, width, circumference, thickness except for height. Second, by using 3D virtual garment simulation, new torso pattern considered underweight female was development. The basic numerical formula were as follows ; bust girth B/2+3.5, armhole depth B/4+0.5, front waist girth W/4+0.5+0.7, back waist girth W/4+0.5-0.7, front hip girth H/4+1+0.5, back hip girth H/4+1-0.5, chest width B/6+3.1, back width B/6+4.5, neck width B/12+0.2 and neck depth B/12+1.7. Third, by reducing hollowed amount of front, back, and side line, and hollowed amount of back center line, the reduced quantity was included to darts amount. Number of dart was adjusted to two pieces so that darts amount was equally distributed to two darts. Forth, according to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern was appropriate for the underweight women. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns, and also for future 3D pattern production program development.

3D 가상착의 시스템에 의한 아동후기 비만여아의 슬랙스 원형 설계 (Development of lower bodice pattern for late-elementary obese-schoolgirls using 3D virtual garment simulation)

  • 임지영
    • 복식문화연구
    • /
    • 제23권4호
    • /
    • pp.616-627
    • /
    • 2015
  • The purpose of this study was to develop slacks patterns for obese-schoolgirls aged 10~12 by using a 3D virtual garment simulation system. The criteria for subjects in this study were girls who had a BMI of over $25kg/m^2$. A total of 155 schoolgirls who met these criteria were enrolled. The results were as follows: First, by using 3D virtual garment simulation, a new slacks pattern considerate of obese-schoolgirls was developed. The basic numerical formulae were as follows: Front and back hip girth of H/4-0.5+1 and H/4+0.5+1.5, front waist girth of W/4+1+0.5, back waist girth of W/4+2+0.5, front crotch extension of H/16-0.5, back crotch extension of H/8-0.5, front dart amount of 1, and back dart amount of 2. Second, according to the new slacks pattern appearance evaluation, the new slacks pattern scored more highly than the existing pattern for silhouette and ease amount, confirming that the new slacks pattern is appropriate for obese-schoolgirls. Additionally, the new slacks pattern was evaluated allowing for the proper space length of the waist, abdomen and hips. This study is expected to serve as important basic data for ensuing studies that may utilize a 3D virtual garment simulation system with 2D patterns and for future 3D pattern production program development.

3D 가상모델 및 가상착의 시스템을 이용한 남자 운동선수의 상반신 원형설계 (A Development of the Bodice Pattern for Male Sports Athletes Using by 3D Virtual Twin & Virtual Garment Simulation)

  • 임지영
    • 한국의류산업학회지
    • /
    • 제12권3호
    • /
    • pp.347-353
    • /
    • 2010
  • The purpose of this study was to examine the appropriate surplus of clothing for a suitable basic bodice pattern of Male Sports Athletes by using the 3D virtual twin and virtual garment simulation system. The results were as follows; 1. By using 3D virtual twin and garment simulation, new bodice pattern considered male sports athletes was development. The basic numerical formula were as follows ; surplus of chest girth=9, surplus of back length=1, armhole depth=back length/4+13, half back width=chest girth/5+2.5, front chest width=chest girth/5+3. 2. Wearing test by 3D virtual garment simulation system was useful to evaluate wearing outline, surplus of clothes and garment space. Also it estimated more highly than existing pattern in silhouette and ease amount, confirming that new bodice pattern is appropriate for the male sports athletes. New bodice pattern was evaluated to allow proper space length of chest and waist. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.

3D 가상착의 시스템에 의한 비만 중년여성의 토르소 원형설계에 관한 연구 (A Development of the Torso Pattern for Obese Middle-aged Women from 3D Virtual Garment Simulation)

  • 임지영
    • 한국의류산업학회지
    • /
    • 제12권1호
    • /
    • pp.86-93
    • /
    • 2010
  • The purpose of this study was to develop torso pattern of Middle-aged obese women by using the virtual twin and 3D virtual garment simulation system. The results were as follows; 1. By using 3D Virtual Garment Simulation, new torso pattern considered obese women was development. The basic numerical formula were as follows ; bust girth B/2+5, armhole depth B/6+5, front waist girth W/4+2+0.5, back waist girth W/4+1-0.5, front hip girth H/4+1+0.5, back hip girth H/4+2-0.5, chest width B/6+2.5, back width B/6+2.5 and back neck width B/20+2.5. 2. According to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern is appropriate for the obese women. Also, new torso pattern was evaluated to allow proper space length of bust, waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.

가상 착의 시스템에 의한 비만 여중생의 교복 원형 개발 (A Development of the Uniform Pattern for Obese Junior-High School Girls from Virtual Garment Simulation)

  • 임지영
    • 복식문화연구
    • /
    • 제19권2호
    • /
    • pp.245-254
    • /
    • 2011
  • The purpose of this study was to develop uniform pattern of obese junior-high school girls by using the virtual twin and 3D virtual garment simulation system. The results were as follows; first, by using 3D virtual garment simulation, new uniform pattern considered obese junior-high school girls was development. The basic numerical formula were as follows; bust girth=B/2+2.5, armhole depth=B/4, front waist girth=W/4+1.8, back waist girth=W/4+1, front hip girth=H/4+1, back hip girth=H/4+1, chest width=chest width+1.5, back width=back width+1 and back neck width 8cm. Second, according to the results of the new uniform pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new uniform pattern is appropriate for the obese junior-high school girls. Also, new uniform pattern was evaluated to allow proper space length of bust, waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns, and also for future 3D pattern production program development.

가상착의를 활용한 한복 저고리 원형설계의 기초연구 - 50대 중년여성을 중심으로 - (A Development of Hanbok Jeogori Pattern from Virtual Garment Simulation - With a Focus on Women in their 50s -)

  • 임지영;이해영
    • 한국의류산업학회지
    • /
    • 제14권4호
    • /
    • pp.607-613
    • /
    • 2012
  • This study develops a Hanbok Jeogori pattern for middle-aged women with a 3D virtual-twin and virtual-garment simulation system. The including criteria for subjects in this study was a focus on women in their 50s, and a total of 345 females satisfying them were enrolled for 3D virtual model. Comparative Jeogori pattern, Baik & Choi's(2004) pattern, was selected for the development of Jeogori pattern. The results were: first, a new Jeogori pattern considerate of middle-aged women was developed. The basic numerical formula were: Front and back bust girth B/4+1.5, armhole depth B/4, sleeve width B/4, goedae width B/10-1.5 and git width 5.5. Second, according to the results of the new Jeogori patterns appearance evaluation, the new Jeogori pattern scored higher than the existing pattern in silhouette and ease amount, this confirmed that the new Jeogori pattern is appropriate for middle-aged women. Virtual models of production through data from 3D body scan, pattern draft, and virtual garment digital program were applied to a prototypic design method to enhance the fitness of ready-made Hanbok garments. This study serves as important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns and for the future 3D Pattern Production Program development of Hanbok patterns.

Polyjet방식 3D 프린터를 이용한 스트레이트 베벨기어의 제작 특성에 관한 실험적 연구 (Experimental Study on Production Characteristics of Straight Bevel Gear using a Polyjet Method 3D Printer)

  • 김해지
    • 한국기계가공학회지
    • /
    • 제14권6호
    • /
    • pp.63-68
    • /
    • 2015
  • Recently, 3D printer technologies have been used in many research efforts for high precision manufacturing. In particular, the rapid prototyping technology has been developing rapidly, because it can be manufactured in a short time with a 3D designed shape. This paper relates to the production characteristics of the straight bevel gear designed using a 3D print using the PolyJet method. The characteristics of a 3D printed straight bevel gear were compared with a machined straight bevel gear. The accuracy of the produced straight bevel gear was evaluated by backlash, meshing pattern, face angle, root angle, and surface roughness.

A Study on the Automatic Pattern Development of Adult Male Basic Pattern Using 3D Body Scan Data

  • Jeong, Mi-E;Nam, Yun-Ja
    • 패션비즈니스
    • /
    • 제11권3호
    • /
    • pp.35-45
    • /
    • 2007
  • This study examined how to create 2D basic pattern of individuals by means of 3-D body figure, which is to develop a flat of individual basic pattern directly from the 3-D body scan data of each subject using that of the upper body of a male adult. In terms of methodology, this study adopted 3D body scan data on system and body to make examinations in the following steps: 1. Standard point and line were set on human body, along with 3-D definition points(feature points). 2. PB was created by modifying horizontal and longitudinal section of scan data. 3. Ways to set reserve were established in the findings of PB planar development. Respective developed flat patterns were compared with pattern findings in previous studies by means of sensory evaluation. As a result, it was found that both system and body model are basic pattern and belong to appropriate pattern as semi-tight-fit basic pattern with overall appropriate tolerances. Thus, this study came to a conclusion that it is feasible and valid to develop theories for flat development as considered herein.

Prediction of rock fragmentation and design of blasting pattern based on 3-D spatial distribution of rock factor

  • 심현진;한창연;남현우
    • 지반과기술
    • /
    • 제3권3호
    • /
    • pp.15-22
    • /
    • 2006
  • The optimum blasting pattern to excavate a quarry efficiently and economically can be determined based on the minimum production cost, which is generally estimated according to rock fragmentation. Therefore, it is a critical problem to predict fragment size distribution of blasted rocks over an entire quarry. By comparing various prediction models, it can be ascertained that the result obtained from Kuz-Ram model relatively coincides with that of field measurements. Kuz-Ram model uses the concept of rock factor to signify conditions of rock mass such as block size, rock jointing, strength and others. For the evaluation of total production cost, it is imperative to estimate 3-D spatial distribution of rock factor for the entire quarry. In this study, a sequential indicator simulation technique is adopted for estimation of spatial distribution of rock factor due to its higher reproducibility of spatial variability and distribution models than Kriging methods. Further, this can reduce the uncertainty of predictor using distribution information of sample data. The entire quarry is classified into three types of rock mass and optimum blasting pattern is proposed for each type based on 3-D spatial distribution of rock factor. In addition, plane maps of rock factor distribution for each ground level are provided to estimate production costs for each process and to make a plan for an optimum blasting pattern.

  • PDF

전기화학적 금속 3D 프린터의 적층 조건 연구를 통한 마이크로 코일 제작 (The Micro Coil Production through Research on the Additive Conditions of Electrochemical Metal 3D Printer)

  • 김영국;강동화;김성빈;유봉영
    • 한국표면공학회지
    • /
    • 제53권4호
    • /
    • pp.138-143
    • /
    • 2020
  • In this study, we produced a coil of micro-pattern that can be used for electromagnetic wave absorber, heating material, wireless charging, sensor, antenna, etc. by using electrochemical additive manufacturing method. Currently, it contains research contents for manufacturing a micro pattern coil having practicality through control of process control variables such as applied voltage, distance between electrode, and nozzle injection. Circulation of the electrolyte through the nozzle injection control can significantly contribute to improving the surface characteristics of the coil because of minimizing voltage fluctuations that may occur during the additive manufacturing process. In addition, by applying the pulse method in the application of voltage, the lamination characteristics of the plated body were improved, which showed that the formation of a fine line width plays an important role in the production of a micro pattern coil. By applying the pulse signal to the voltage application, the additive manufacturing characteristics of the produced product were improved, and it was shown that the formation of a fine line width plays an important role in the production of a micro pattern coil.