• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.264-269
• /
• 2019

This paper presents mechanical design and control of a bio-inspired legged robot. To achieve a fast legged running mechanism, a novel linkage leg structure is designed based on hind legs of domestic cats. The skeletomuscular system and parallel leg movement of a cat are analyzed and applied to determine the link parameters. The hierarchical control architecture is designed according to the biological data to generate and modulate desired gaits. The effectiveness of the leg mechanism design and control is verified experimentally. The legged robot runs at a speed of 46 km/h, which is comparatively higher speed than other existing legged robots.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.1
• /
• pp.132-137
• /
• 2011

The walking mobility with stability of 4 legged robots is the distinguished skills for many application areas. Planning gaits of efficient walking for quadruped robots is an important and challenging task. Especially, autonomous generation of locomotion is required to manage various robot models and environments. In this paper, we propose an adaptive locomotion control of 4 legged robot for irregular terrain using HyperNEAT. Generated locomotion is executed and analysed using ODE based Webots simulation for the 4 legged robot which is built by Bioloid.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.4
• /
• pp.350-356
• /
• 2004

This paper presents a farce manipulability analysis of multi-legged walking robots, which calculates force or acceleration workspace attainable from joint torque limits of each leg. Based on the observation that the kinematic structure of the multi-legged walking robots is basically the same as that of multiple cooperating robots, we derive the proposed method of analyzing the force manipulability of walking robot. The force acting on the object in multiple cooperating robot systems is taken as reaction force from ground to each robot foot in multi-legged walking robots, which is converted to the force of the body of walking robot by the nature of the reaction force. Note that each joint torque in multiple cooperating robot systems is transformed to the workspace of force or acceleration of the object manipulated by the robots in task space through the Jacobian matrix and grasp matrix. Assuming the torque limits are given in infinite norm-sense, the resultant dynamic manipulability is derived as a polytope. The validity of proposed method is verified by several examples, and the proposed method is believed to be useful for the optimal posture planning and gait planning of walking robots.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.5
• /
• pp.660-666
• /
• 2011

In this paper, we proposed a Particle Swarm Optimization(PSO) to search the optimal link lengths for legged walking robot. In order to apply the PSO algorithm for the proposed, its walking robot kinematic analysis is needed. A crab robot based on four-bar linkage mechanism and Jansen mechanism is implemented in H/W. For the performance index of PSO, the stride length of the legged walking robot is defined, based on the propose kinematic analysis. Comparative simulation results present to illustrate the viability and effectiveness of the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1964-1972
• /
• 2009

This paper proposed a distributed web environment for developing robot services using a 4-legged robot and MSRS. The proposed development environment of the robot services enabled a high-level complicated robot application to operate in a distributed web environment by implementing robot functions as services which can be run on network nodes using Microsoft MSRS. The environment has been also implemented using a 4-legged robot, Genibo as a robot platform. In experiment, we showed the developed robot services are enable to be executed and configured dynamically and support a remote monitoring in a distributed web environment. Finally the feasibility and the effectiveness of the proposed environment has been verified by creating a robot application using the developed robot services in Visual Program Language which helps student to create a complicated robot application system easily.

• The Journal of Korea Robotics Society
• /
• v.17 no.4
• /
• pp.500-507
• /
• 2022

In this study, a motion planning method based on the integer representation of contact status between wheels and the ground is proposed for planning swing motion of a 6×6 wheel-legged robot to cross large obstacles and gaps. Wheel-legged robots can drive on a flat road by wheels and overcome large obstacles by legs. Autonomously crossing large obstacles requires the robot to perform complex motion planning of multi-contacts and wheel-rolling at the same time. The lift-off and touch-down status of wheels and the trajectories of legs should be carefully planned to avoid collision between the robot body and the obstacle. To address this issue, we propose a planning method for swing motion of robot legs. It combines an integer representation of discrete contact status and a trajectory optimization based on the direct collocation method, which results in a mixed-integer nonlinear programming (MINLP) problem. The planned motion is used to control the joint angles of the articulated legs. The proposed method is verified by the MuJoCo simulation and shows that over 95% and 83% success rate when the height of vertical obstacles and the length of gaps are equal to or less than 1.68 times of the wheel radius and 1.44 times of the wheel diameter, respectively.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.3
• /
• pp.304-309
• /
• 2014

In this paper, we design a hybrid wheeled and legged mobile robot with a waist joint. The proposed hybrid mobile robot is designed to have a hybrid structure with leg and wheel for the efficient movement in flat and uneven surfaces. The proposed robot have a waist joint that is used to stably transform from wheeled driving to legged walking of the robot and to overcome non-flat surface. In order to recognize various environments we use LRF sensor, PSD sensor, CCD camera. Also, a motion planning method for hybrid mobile robot with a waist joint is proposed to select wheeled driving motion and legged walking motion of the robot based the environment types. We verify the efficient mobility of the developed hybrid mobile robot through navigation experiments using the proposed motion planning method in various environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.131-136
• /
• 1988

In this paper we describe a motion control algorithm for a 4-legged robot over slopped terrain and steps. The new concept of the mechanically constrained angle has been introduced and the algorithm has been developed based on the relationship between the gait stability margin and the slope angle. The result then has been extended to the case where the robot walks over steps.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.278-284
• /
• 2019

Legged locomotion has high mobility on irregular surfaces by touching the ground at discrete points. Inspired by the creature's legged locomotion, legged robots have been developed to explore unstructured environments. In this paper, we propose a modular crawler that can easily adjust the number of legs for adapting the environment that the robot should move. One module has a pair of legs, so the number of legs can be adjusted by changing the number of modules. All legs are driven by a single driving motor for simple and compact design, so the driving axle of each module is connected by the universal joint. Universal joints between modules enable the body flexion for steering or overcoming higher obstacles. A prototype of crawler with three modules is built and the driving performance and the effect of module lifting on the ability to overcome obstacles are demonstrated by the experiments.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.2
• /
• pp.159-164
• /
• 2011

In this study, a crab robot is implemented in H/W based on four-bar linkage mechanism and Jansen mechanism, and its kinematics is analysed. A vision camera is attached to the mechanism, which makes the proposed robot a kind of biologically inspired robot for image acquisition. Three ultrasonic sensors are adopted for obstacle avoidance. In addition, the biologically inspired robot can achieve the mission appointed by a programmer outside, based on RF and Blue-tooth communication module. For the design and implementation of a crab robot, it is need to get joint variable, a foot point, and their relation. Thus, the proposed kinematic analysis is very important process for the design and implementation of legged robots.