This paper presents the results of an experimental program concerning the efficiency of a specific strengthening technique which utilizes a small steel link element connected to the R/C frame through bracing elements. Brittle types of failure, especially at the connections between steel and concrete elements, can be avoided by appropriate design of the local details. Five single storey one bay R/C frames scaled 1:3 were constructed according to older codes with substandard details. The first one was a typical bare reference frame. The other four were identical to the first one, strengthened by steel bracing elements. The behavior of the strengthened frames is described with respect to the reference bare frame. The concrete frames were constructed according to older code provisions by the use of smooth steel bars, low strength concrete, sparsely spaced stirrups and substandard details. The strengthening scheme aimed to the increase of both strength and deformation capacity of the original R/C frame. The inelastic deformations are purposely concentrated to a short steel link element connecting the steel bracing to the R/C frame. The results show that the steel link element can increase considerably the strength and the energy dissipation capacity of the frame.
Song, Seung Kyu;Hong, Mi Ae;Oh, Kyung Chang;Ahn, Seung In;Tae, Mi Hyon;Shin, Hye Jung;Chang, Jin Keun;Cha, Sung Ho
Clinical and Experimental Pediatrics
/
v.45
no.8
/
pp.973-979
/
2002
Purpose : Recently, a number of rapid antigen detection tests have been available to diagnose group A streptococcal pharyngotonsillitis. The purpose of this study was to determine the sensitivity, specificity and consistency of the two rapid antigen detection tests. Methods : Among the patients who visited our clinic from November 2001 to February 2002, 61 patients who had clinical findings of pharyngeal erythema or edema, pharyngeal exudates and soft palatine petechiae were enrolled in our study. A total of 61 patients were tested with rapid antigen detection tests and throat culture. BD $LINK2^{TM}$ Strep A(Becton, Dickinson & Company, U.S.A.) and $QuickVue^{(R)}$$In-Line^{TM}$(Quidel Corporation, U.S.A.) were selected for rapid antigen detection tests. Results : Of the 61 patients tested, 22 patients were confirmed as group A streptococcal pharyngotonsillitis by throat culture. The BD $LINK2^{TM}$ Strep A had a sensitivity of 81.8% and a specificity 89.7%. The positive and negative predictive values were 81.8% and 89.7%, respectively. The $QuickVue^{(R)}$$In-Line^{TM}$ had a sensitivity of 77.3% and a specificity of 100%. The positive and negative predictive values were 100% and 88.6%, respectively. The kappa values of BD $LINK2^{TM}$ Strep A and $QuickVue^{(R)}$$In-Line^{TM}$ were 0.72 and 0.81, respectively. Conclusion : In addition to high sensitivity, specificity and consistency, both kits are easy to use and simple to interpret, and therefore have the potential to be used with backup throat culture for diagnosis of acute pharyngotonsillitis.
Kang, Shin-Woo;Lee, Young Seo;Park, Sang-Woong;Ahn, Tae-Sik
Journal of Advanced Navigation Technology
/
v.26
no.5
/
pp.325-330
/
2022
The sensors of aircraft are necessity for mission performance and fusion process of data from them is applied for increase of mission efficiency and decrease of aircraft pilot workload. Data fusion is applied and developed to provide pilot a series of more processed data format about a specific target from sensors in aircraft. Military aircraft currently in operation are linked with a tactical data link such as Link-16 to display improved tactical situation to pilots to increase mission efficiency. By fusing the sensor data with improved accuracy obtained as the sensors' performance mounted on the aircraft become higher and the tactical situation information received through the tactical data link, it provides the pilot with a highly reliable tactical situation and mission environment, and expects efficient mission performance and high survivability. In this paper, a fusion architecture to produce fused data with realtime information from the sensors and data through a tactical data link is shown.
In this paper, we give a recursive formula for the Jones polynomial of a 2-bridge knot or link with Conway normal form C($-2n_1$, $2n_2$, $-2n_3$, ..., $(-1)_r2n_r$) in terms of $n_1$, $n_2$, ..., $n_r$. As applications, we also give a recursive formula for the Jones polynomial of a 3-periodic link $L^{(3)}$ with rational quotient L = C(2, $n_1$, -2, $n_2$, ..., $n_r$, $(-1)^r2$) for any nonzero integers $n_1$, $n_2$, ..., $n_r$ and give a formula for the span of the Jones polynomial of $L^{(3)}$ in terms of $n_1$, $n_2$, ..., $n_r$ with $n_i{\neq}{\pm}1$ for all i=1, 2, ..., r.
We frequently encounter binary data in real life. Logistic, Probit, Cauchit, Complementary log-log models are often used for binary data analysis. In order to analyze binary data, Liu (2004) proposed a Robit model, in which the inverse of cdf of the Student's t distribution is used as a link function. Kim et al. (2008) also proposed a generalized t-link model to make the binary regression model more flexible. The more flexible skewed distributions allow more flexible link functions in generalized linear models. In the sense, we propose a binary data regression model using skewed generalized t distributions introduced in Theodossiou (1998). We implement R code of the proposed models using the glm function included in R base and R sgt package. We also analyze Pima Indian data using the proposed model in R.
Journal of The Institute of Information and Telecommunication Facilities Engineering
/
v.4
no.1
/
pp.7-13
/
2005
In this paper, we propose the time synchronization module on fiber optic repeater to use optic line delay for obtaining time synchronization between up-link and down-link, in the 2.3 GHz WiBro network using TDD/OFDM (Time Division Duplex/Orthogonal Frequency Division Multiplexing) Generally, when we use fiber optic repeater to remove the shade area, it occurs transmission delay which is caused by optic transmission between RAS (Radio Access Station) and fiber optic repeater and inner delay of fiber optic repeater. Because the WiBro system is adopting a TOO method and there exists the difference of switching time which is caused by these delay between up-link and down-link, it occurs ISI (Inter Symbol Interference), ICI (Inter Carrier Interference). These interference results in the reduction of the coverage. And the inconsistency between Up-Link and Down-Link switching time maybe gives rise to the interruption of communication. In order to prevent these cases, we propose synchronization module using analog optic line delay as the one of synchronizing up-link and down-link. And we propose the consideration factor for the designing time synchronization module and the feature of optic line of analog method. The measurement result of optic line time synchronization module of structure proposed is as follows, the delay error of $0.5{\mu}g$ and the insertion loss value below maximum 4.5dB in range of $0{\sim}40{\mu}s$. These results fully meet the specification of WiBro System.
Choi, S.H.;Jun, B.Y.;Lee, M.C.;Park, R.H.;Eom, J.G.;Joun, M.S.
Transactions of Materials Processing
/
v.15
no.5
s.86
/
pp.373-381
/
2006
The key technologies necessary to develop and utilize a double-action link-type hydraulic die set for the enclosed die forging are presented in this paper. Various die sets for the enclosed die forging are investigated and the technologies necessary to develop and to utilize a double-action link-type hydraulic die set are introduced in detail with emphasis on the mechanism of the die set and its kinematical behaviors, the force transmission mechanism, the criterion on the enclosed die forging and its application, the forming load prediction and the stress distribution of the link. A double-action link-type hydraulic die set is developed and it is applied to the enclosed die forging of a bevel gear.
Transactions of the Korean Society of Automotive Engineers
/
v.20
no.5
/
pp.113-119
/
2012
CTBA(Coupled Torsion Beam Axle) has been adapted as the rear suspension of a compact car. Because that has the advantage of cost and weight in comparison with multi-link type. But CTBA has the disadvantage in vehicle stability to become oversteer occurring toe-out of the rear wheel when cornering and braking. In this study, we suggested CTBA Geometry Compensation System to overcome the disadvantage of CTBA. We predicted braking and cornering vehicle performance from proposed equation and numerical simulation. And also, the results were compared to objective and subjective evaluation in vehicle.
Journal of Dental Rehabilitation and Applied Science
/
v.25
no.3
/
pp.225-235
/
2009
A common procedure of restoration of endodonticlly treated tooth with fiber-reinforced post is followed by core build-up after post cementation. However, this technique is complex and time-consuming. The aim of this study was to compare fracture strength of premolar, restored with various methods of core fabrications on fiber-reinforced posts and casting metal restoration. Forty five freshly extracted human mandibular premolars were obtained and devided into 5 groups acconding to the type of post and methods of core build-up. In Group A, D.T. $Light-post^{(R)}$ were cemented with $DUO-LINK^{TM}$ and then $LIGHT-CORE^{TM}$ was used for core restoration. In Group B, D.T. $Light-post^{(R)}$ and $DUO-LINK^{TM}$ were used for cementing in the postspace, and $DUO-LINK^{TM}$ was used again for core restoration. In Group C, $Light-post^{(R)}$ bonding and the core build-up were performed simultaneously by using $DUO-LINK^{TM}$. In Group D, $LuxaPost^{(R)}$ was bonded by using $LuxaCore^{(R)}-Dual$. Again, $LuxaCore^{(R)}-Dual$ was used for core restoration. In Group E, $LuxaPost^{(R)}$ bonding and the core build-up were performed simultaneously by using $LuxaCore^{(R)}-Dual$. Axial reduction was formed parallelly as possible and 45 degree bevel was made at buccal occlusal surface. Crowns were fabricated and cemented. Each tooth was embedded in self-curing acrylic resin to the level of 2mm below the CEJ. Specimens were fixed on universal testing machin such that the axis of the tooth was at 45 degree inclination to the horizontal plane, and compressive force was applied at a crosshead speed of 1mm/min until failure occurred. The mean fracture strength was the highest in group A followed by descending order in group B, D, E and C. However, there were no statistically significant differences between groups with regard to the fracture strength. The type of the post or build-up methods of the core does not seem to influence the fracture strength.
Kim, Hee Rae;Kim, Young Hoon;Kim, Han Sung;Woo, Jung Sik
Korea Journal of Hospital Management
/
v.21
no.2
/
pp.50-62
/
2016
The study was conducted to compare organizational innovation depending on the leadership type of middle managers in general hospital. Moreover, the study was also to prove whether employees'readiness causes any differences to the link between leadership and organizational innovation. The result is based on 769 sheets of survey paper answered by administrations and nurses working at general hospitals or the same level of hospitals located in the metropolitan area. The methods of analysis used are as follows: reliability analysis, frequency analysis, t-test, ANOVA, multiple regression analysis, and hierarchical regression analysis. Main results of the study can be summarized as below. First, by analyzing the influence of task-behavior leadership on organizational innovation, R squre on knowledge management which is organizational innovation factor was 12.5%, R squre on creativity was 9.1%, and R squre on innovation behavior was 10.3%. Regression model appeared to be statistically significant as well. Both task-behavior and relationship-behavior leadership have influence on organizational innovation and it is learned that relationship-behavior leadership has a bigger influence on all the organizational innovation factors. Second, moderating effect of the employee's readiness is examined in terms of the link between leadership and organizational innovation. As a result, the member's readiness had positive influence when it comes to the link between leadership and organizational innovation. Also, after verifying moderating effect of readiness (ability/willingness), this study shows that ability readiness has positive influence on the link between task-behavior(or relationship-behavior) leadership and creativity, and innovation behavior while willingness readiness positively influences the link between task-behavior(or relationship-behavior) leadership and creativity & innovation behavior. To summarize results of the study, this study shows that the members who possess high readiness also have high organizational innovation, which promises their positive role in a group.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.