• Review of KIISC
• /
• v.33 no.4
• /
• pp.75-81
• /
• 2023

본 논문에서는 국제전기통신연합(ITU)의 정보통신기술 표준을 담당하고 있는 ITU-T에서 보안 분야표준을 제정하고 있는 SG17에서의 양자암호 표준화 최신 동향을 살펴보았다. ITU-T SG17에서 양자암호 관련 표준화는 실무반인 Q15에서 담당하고 있다. 양자암호통신은 더 이상 쪼갤 수 없는 물리량의 최소 단위인 양자(Quantum)의 특성을 다양한 통신서비스에 적용하여 가장 높은 수준의 보안 서비스를 제공하는 것을 목적으로 하고 있고, 이를 위해 표준화가 필요한 영역에서의 보안 요구 사항과 그와 관련된 상호호환성을 보장하기 위한 다양한 영역의 표준화를 ITU-T SG17 Q15에서 진행 중에 있는데, 해당 실무반의 표준화 연혁과 현재 진행 중인 다양한 표준화 과제의 최신 표준화 현황을 살펴보았다.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.31-37
• /
• 2001

Following the recent trends of reducing the size of multimedia devices, we tried for the development of a compact-sized speaker to produce low-frequency sounds efficiently. For this work, equivalent-circuit analysis was used to get fundamental resonant frequency and then the structure of speaker components has been changed appropriately. As a result, an 80mm small-sized speaker was developed. The performance test showed that the resonant frequency of our system is 79 Hz while that of numerical analysis was 81Hz. At a distance of 1m from our speaker, the frequency ranges 80 Hz to 15kHz and the average sound pressure was found to be 84±2 dB. The second (at 400 Hz) and the third (at 100 Hz) high-frequency distortions of our system were 0.5% and 1.8% respectively, which is to be compared with the distortions of 0.9% and 6% in conventional speakers.

• Korean Journal of Materials Research
• /
• v.18 no.8
• /
• pp.444-449
• /
• 2008

Samples of GaMnAs, GaMnAs codoped with Be, and GaMnAs simultaneously codoped with Be and Mg were grown via low-temperature molecular beam epitaxy (LT-MBE). Be codoping is shown to take the Ga sites into the lattice efficiently and to increase the conductivity of GaMnAs. Additionally, it shifts the semiconducting behavior of GaMnAs to metallic while the Mn concentration in the GaMnAs solid solution is reduced. However, with simultaneous codoping of GaMnAs with Be and Mg, the Mn concentration increases dramatically several times over that in a GaMnAs sample alone. Mg and Be are shown to eject Mn from the Ga sites to form MnAs and MnGa precipitates.

• The Plant Pathology Journal
• /
• v.19 no.2
• /
• pp.97-101
• /
• 2003

This study was conducted to determine the efficacy of Epicoccosorus nematosporus for the control of Eleocharis kuroguwai and to evaluate the meteorological factors which affect weeding efficacy in field conditions for three years (1996-1998). The best time to control E. kuroguwai with E. nematosporus as a biological control agent in the field was in July, when temperature ranged from 20.4 to $23.4^{\circ}C$; the surface wetness duration was 12.6-16.1 hours, and application time of 6:00 p.m. and 8:00 p.m.; and weeding efficacy was 81-90%. On 10 June 1996 in Milyang area, where the field experiments were performed, mean temperature was $16.5^{\circ}C$ with 11.3 hours of dew duration. Meanwhile, on 20 Aug. 1996 the temperature was $21.3^{\circ}C$ with 15.4 hours of dew duration. During these periods, the weeding efficacy was recorded at 61.8 and 60.8%, respectively. Time required for complete plant death was 25.8 and 25.6 days at application times 10 June and 20 Aug., respectively. At the time of application on 7,18, and 27 July 1996, mean temperature was 20.4-$23.4^{\circ}C$ with 12.6-16.5 hours of dew duration. The weeding efficacies of these periods were very hi일 with 81.4-90.8%. Three years of field observations from 1996 to 1998 showed that infection in the field can occur at any time through the summer season, although total infection rates vary between months and between years. In 1996, plant infection rapidly increased from 56% on 30 June, 82.4% on 15 July, 94.6% on 15 August, and 92.8% on 15 September under favorable meteorological conditions such as minimum temperature of $17.6^{\circ}C$ and maximum temperature of $27.1^{\circ}C$, with 86% relative humidity and 977.5 mm of rainfall during E. kuroguwai growing season. However, in 1997, the disease incidence was very low because of unfavorable weather conditions brought about by the hot temperature and the low amount of rainfall at 321.5 mm. Disease progress was slow from 24.4% on 30 June to 49.2% at the end of the growing season.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.4
• /
• pp.380-385
• /
• 1988

The present study was conducted to evaluate agronomic characters of the soybean germplasm which was collected from the sites covering whole areas of southern Korean peninsula. A total of 2,748 Korean native soybeans was grouped for fruiting period and in this group frequency distribution of the important agronomic characters and relationships among the characters were determined. The results obtained were summarized as follows; The soybean germplasm was comprised of SeoulㆍKyonggi-do 7.5%, Kangwon-do 13.3%, Chungchongbuk-6.6%. Chungchongnam-do 12.3%, Chollabuk-do 10.7%, Chollanam-do 12.6%, Kyongsangbuk-do 20.8%, Kyongsangnam-do 15.3% and Cheju-do 0.6% in number of collections. Frequency distribution of the germplasm for fruiting period was 0.14% in Group I (below 55 days). 1.67% in Group II (56-60 days), 10.58% in (Group III(61-65 days), 23.18% in Group IV(66-70 days), 25.91% in Group V(71-75 days) 19.79% in Group Ⅵ(76-80 days), 15.1% in Group Ⅶ(81-85 days) and 3.6% in Group Ⅷ(over 85 days). The lines over 70 days in fruiting period were as much as 64.4% of germplasm. The fruiting period varied largely from 45 days to 91 days. Fruiting period was positively correlated to seed weight, days to maturity, days to flowering, plant height and number of branches per plant, respectively. While. it was negatively correlated to number of pods, lodging and virus infectivity, repectively, and in particular negative correlation was shown significantly between yield and fruiting period. Average yield was very high as much a 1.389kg/ha in fruiting period Group I, and decreased with increment of fruiting period, 1.400kg/ha in Group II. 1.384kg/ha in Group III. 1,299kg/ha in Group IV, 1,197kg/ha in Group V, 1,117kg/ha in Group Ⅵ, 967kg/ha in Group Ⅶ and 832kg/ha in Group Ⅷ.

• Archives of Craniofacial Surgery
• /
• v.15 no.2
• /
• pp.75-81
• /
• 2014

Background: The fibular free flap has been used as the standard methods of segmental mandibular reconstruction. The objective of mandibular reconstruction not only includes restored continuity of the mandible but also the recovery of optimal function. This paper emphasizes the advantage of the fibular free flap reconstruction over that of locking mandibular reconstruction plate fixation. Methods: The hospital charts of all patients (n=20) who had a mandibular reconstruction between 1994 and 2013 were retrospectively reviewed. Eight patients had plateonly fixation of the mandible, and the remaining 12 had vascularized fibular free flap reconstruction. Complications and outcomes were reviewed and compared between the 2 groups via statistical analysis. Results: Overall complication rates were significantly lower in the fibular flap group (8.3%) than in the plate fixation group (87.5%; p =0.001). Most (7/8) patients in the plate fixation group had experienced plate-related late complications, including plate fracture or exposure. In the fibular flap group, no complications were observed, except for a single case of donor-site wound dehiscence (1/12). Conclusion: The fibular free flap provides a more stable support and additional soft tissue support for the plate, thereby minimizing the risk of plate-related complications. Fibular free flap is the most reliable option for mandibular reconstruction, and we believe that the flap should be performed primarily whenever possible.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.4
• /
• pp.588-596
• /
• 2018

An endo-${\beta}$-1,4-glucanase gene, cel9K, was cloned using the shot-gun method from Paenibacillus sp. X4, which was isolated from alpine soil. The gene was 2,994 bp in length, encoding a protein of 997 amino acid residues with a predicted signal peptide composed of 32 amino acid residues. Cel9K was a multimodular enzyme, and the molecular mass and theoretical pI of the mature Cel9K were 103.5 kDa and 4.81, respectively. Cel9K contains the GGxxDAGD, PHHR, GAxxGG, YxDDI, and EVxxDYN motifs found in most glycoside hydrolase family 9 (GH9) members. The protein sequence showed the highest similarity (88%) with the cellulase of Bacillus sp. BP23 in comparison with the enzymes with reported properties. The enzyme was purified by chromatography using HiTrap Q, CHT-II, and HiTrap Butyl HP. Using SDS-PAGE/activity staining, the molecular mass of Cel9K was estimated to be 93 kDa, which is a truncated form produced by the proteolytic cleavage of its C-terminus. Cel9K was optimally active at pH 5.5 and $50^{\circ}C$ and showed a half-life of 59.2 min at $50^{\circ}C$. The CMCase activity was increased to more than 150% in the presence of 2 mM $Na^+$, $K^+$, and $Ba^{2+}$, but decreased significantly to less than 50% by $Mn^{2+}$ and $Co^{2+}$. The addition of Cel9K to a commercial enzyme set (Celluclast 1.5L + Novozym 188) increased the saccharification of the pretreated reed and rice straw powders by 30.4% and 15.9%, respectively. The results suggest that Cel9K can be used to enhance the enzymatic conversion of lignocellulosic biomass to reducing sugars as an additive.

• Journal of The Korean Astronomical Society
• /
• v.27 no.1
• /
• pp.81-102
• /
• 1994

We have decomposed the 11-cm radio continuum emission of the W51 complex into thermal and non-thermal components. The distribution of the thermal emission has been determined by analyzing HI, CO, and IRAS $60-{\mu}m$ data. We have found a good correlation between the 11-cm thermal continuum and the 60- 11m emissions, which is used to obtain the thermal and non-thermal 11-cm continuum maps of the W51 complex. Most of the thermal continuum is emanating from the compact H II regions and their low-density ionized envelopes in W51A and W51B. All the H II regions, except G49.1-0.4 in W51B, have associated molecular clumps. The thermal radio continuum fluxes of the compact H II regions are proportional to the CO fluxes of molecular clumps. This is consistent with the previous results that the total mass of stars in an H II region is proportional to the mass of the associated molecular clump. According to our result, there are three non-thermal continuum sources in W51: G49.4-0.4 in W51A, a weak source close to G49.2-0.3 in W51B, and the shell source W51C. The non-thermal flux of G49.5-0.4 at 11-cm is $\~28 Jy$, which is $\~25\%$ of its total 11-cm flux. The radio continuum spectrum between 0.15 and 300 GHz also suggests an excess emission over thermal free-free emission. We show that the excess emission can be described as a non-thermal emission with a spectral index ${\alpha}{\simeq}-1.0 (S_v{\propto}V^a)$ attenuated by thermal free-free absorptions at low-frequencies. The non-thermal source close to G49.2-0.3 is weak $(\~9 Jy)$. The nature of the source is not known and the reality of the non-thermal emission needs to be confirmed. The non~thermal shell source W51C has a 11-cm flux of $\~130Jy$ and a spectral index ${\alpha}{\simeq}-0.26$.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.83-89
• /
• 2014

Purpose : In case of the intensity modulated radiation therapy (IMRT) using Tomotherapy and linear accelerator (Linac), it was to compare and to evaluate the imaging dose of MVCT and CBCT that were performed daily for the correct set up of the patient. Materials and Methods : The human body model Phantom (Anderson rando Phantom, USA) was divided into the three parts as Head, Thorax, pelvis, and after GafChromic EBT3 film cut to the size of $0.5{\times}0.5cm2$.in the center of the recording area were situated on the ant, post, left, and right surface of the phantom and 2cm in depth from the ant, post, left, right, and center surface of the phantom, the surface dose and inner dose were measured repeatedly three times, respectively, using the tomotherapy (Hi Art) and the OBI of NovalisTx. The measured film calculated the output value by RIP version6.0 and then the average value of the dose was calculated by the one-way analysis of variance. Results : Using the human body model phantom, the results of MVCT and CBCT performance were that measurements of MVCT inner dose were showed $15.43cGy{\pm}6.05$ in the head, $16.62cGy{\pm}3.08$ in the thorax, $16.81cGy{\pm}5.24$ in the pelvis, and measurements of CBCT inner dose were showed $13.28{\pm}3.68$ in the head, from $13.66{\pm}4.04$ in the thorax, $15.52{\pm}3.52$ in the pelvis. The measurements of surface dose were showed in case of MVCT performance, $11.64{\pm}4.05$ in the head, $12.16{\pm}4.38$ in the thorax, $12.05{\pm}2.71$ in the pelvis, and in case of CBCT performance, $14.59{\pm}3.51$ in the head, $15.82{\pm}2.89$ in the thorax, $17.48{\pm}2.80$ in the pelvis, respectively. Conclusion : In case of Inner dose, the MVCT using MV energy showed higher than the CBCT using kV energy at 1.16 times in the head, at 1.22 times in the thorax, at 1.08 times in the pelvis, and in case of surface dose, the CBCT was higher than MVCT, at 1.25 times in the head, at 1.30 times in the thorax, at 1.45 times in the pelvis. Imaging dose was a small amount compared to the therapeutic dose but it was thought to affect partially to normal tissue because it was done in daily schedule. However, IMRT treatment was necessarily parallel with the IGRT treatment through the image-guide to minimize errors between planned and actual treatment. Thus, to minimize imaging dose that the patients receive, when planning the treatment, it should be set up a treatment plan considering imaging dose, or it must be performed by minimizing the scan range when shooting MVCT.

• The Journal of the Korean bone and joint tumor society
• /
• v.15 no.2
• /
• pp.93-103
• /
• 2009

Purpose: We evaluated the outcomes of surgical reconstructions using recycled autograft augmented with VFG for bone defects caused by tumor resections. Materials and Methods: Ten patients with a malignant or locally aggressive bone tumor who were managed with recycled autograft augmented with VFG and followed up minimum 1 year were evaluated for bone union, functional result and complications. The influence of various factors on bone union and functional outcomes were also analyzed. Results: Bone unions were obtained at 13 of 20 junctions. Average union time was 3.7 months at metaphyseal junctions and 8 months at diaphyseal junctions (P<0.05). At diaphyseal junctions, younger aged group and intramedullary location group showed earlier bone union (P<0.05). The mean functional score was 81%. There were 3 nonunions, 4 delayed unions and 2 recycled bone resorption combined with fractures. Conclusion: To obtain excellent results, proper microvascular technique, sufficient length of VFG bridging both junctions, stable internal fixation and protection of reconstructed bone until union are necessary.