• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.522-534
• /
• 2011

The aim of this study is to draw forth the tasks for establishing the right of native biology in Korea through the case study on 'Access on genetic resources and Benefit Sharing'. For this purpose, this study decided on its research subject by selecting Hoodia, on which ABS treaty was made the most recently, through the examination of the representative ABS precedents on plant species. This study analyzed the process background of ABS on Hoodia, and compared & analyzed the ABS procedures of 'Bonn Guidelines' adopted by the 6th Conference of the Parties of the Convention on Biological Diversity in 2002 and Hoodia case. Together with the ABS major issues in common drawn as a result of this analysis, and "Nagoya Protocol" adopted by the 10th Conference of the Parties of the Convention on Biological Diversity, this study intended to shed a light on the impending tasks which Korea faces at present and its role relationship. The research results are as follows: 1. It is required that species habitats should be divided based on biological classification and its subsequent community should be established with the development of infrastructure such as a community's independent production, management and monitoring of bio-species. 2. There needs to be a designation of ABS National Focal Point for sharing of ABS-related general information, boosting of implementation of the relevant convention. 3. There needs to be the establishment of ABS convention system consequent on legislative, administrative, political procedures, and designation of the Competent National Authorities for the provision of the format of Prior Informed Consent (PIC) and Mutually Agreed Terms (MAT) and their contents assessment and confirmation. 4. There should be the establishment of integrated management system of ABS-related research and development of forest biological resources and its relevant research projects. 5. There should be information development through the distribution of responsibility and role between the ministries and offices concerned according to bio-resources, and there needs to be efforts in aiming for opening a working group of academic-industrial institutions for developing a mutually interchangeable system. 6. It's required that the efficient access between industrial circles and the people should be promoted by setting up ABS support center of biological resources in ministry and office's charge. 7. There should be a selection of a national supervisory organization for securement of the right of a local community and monitoring of ABS convention implementation, and a countermeasure system for preventing outflow of forest bioresources. Conclusively, it's judged that it will be possible to inquire into the countermeasures for the establishment of the native forest biology dominion through such research results.

• Korea-Australia Rheology Journal
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2005

Acrylonitrile-Butadiene-Styrene (ABS), polycarbonate (PC) and their alloys are an important class of engineering thermoplastics that are widely used for automotive industry, computer and equipment housings. For the process of recycling mixtures of ABS and PC, it is desirable to know how sensitive the blend properties are to changes in compositions. It was for this reason that blends of virgin ABS and virgin PC at five different compositions, namely, $15\%,\;30\%,\;50\%,\;70%$ and $85\%$ by weight of ABS were prepared and characterised by rheological and mechanical measurements. Rheological properties of these blends in steady, oscillatory and transient step shear and mechanical properties, namely, tensile strength, elongation-at-break and Izod impact strength are reported. The results show that PC behaves in a relatively Newtonian manner, but ABS exhibits significant shear thinning. The ABS-rich blends show a trend that is similar to that of ABS, while PC-rich blends, namely $0\%$ and $15\%$, exhibit a nearly Newtonian behaviour. However, at a fixed shear rate or frequency, the steady shear or the dynamic viscosity varied respectively in a non-mono-tonic manner with composition. Except for $15\%$ blend, the viscosities of other blends fall into a narrow band indicating a wide-operation window of varying blend ratio. The blends exhibited a lower viscosity than either of the two pure components. The other noticeable feature was that the blends at $70\%$ and $85\%$ ABS content had a higher G' than pure ABS, indicating an enhancement of elastic effect. The tensile yield strength of the blends followed the 'rule of mixtures' showing a decreasing value with the increase of ABS content in PC. However, the elongation-at-break and the impact strength did not appear to obey this 'rule of mixtures,' which suggests that morphology of the blends also plays a significant role in determining the properties. Indeed, scanning electron micrographs of the fracture surfaces of the different blends validate this hypothesis, and the $15\%$ blend is seen to have the most distinct morphology and correspondingly different behaviour and properties.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.423-427
• /
• 2003

In this paper, it is to development of brake system with ABS function for aircraft. The test of brake system is required before applying on aircraft. The real-time dynamic simulator with 5-D.O.F. aircraft dynamic model is developed for braking performance test of ABS (Anti-skid Brake System) control h/w with anti-skid brake functions. The dynamic simulator is real-time interface system that is composed of dynamic simulation parts, master control parts, digital and analog in/out interface parts, and user interface parts. The 5-D.O.F. aircraft dynamic model is composed of a big contour and a little contour by simulation s/w. The big contour represents the interactions of forces in airframe, nose and main landing gear, and engines on the center of gravity. The little contour represents interactions of wheel, braking units, hydraulic units and a control unit. ABS control h/w unit with ABS control algorithm is also developed and is tested with simulator under the some conditions of gripping coefficient. We have known that ABS control h/w unit on wet or snowy runway as well as dry runway very well protects wheel skid.

• IMMUNE NETWORK
• /
• v.9 no.1
• /
• pp.4-7
• /
• 2009

Although the success of trastuzumab and rituximab for treatment of breast cancer and non-Hodgkins lymphoma, respectively, suggests that monoclonal antibodies(mAbs) will become important therapeutic agents against a wider range of cancers, useful therapeutic Abs are not yet available for the majority of the human cancers because of our lack of knowledge of which antigens (Ags) are likely to become useful targets. We established a procedure for comprehensive identification of such Ags through the extensive isolation of human mAbs that may be therapeutic. Using the phage-display Ab library we isolated a large number of human mAbs that bind to the surface of tumor cells. They were individually screened by immunostaining, and clones that preferentially and strongly stained the malignant cells were chosen. The Ags recognized by those clones were isolated by immunoprecipitation and identified by mass spectrometry(MS). We isolated 2,114 mAbs with unique sequences and identified 25 distinct Ags highly expressed on several carcinomas. Of those 2,114 mAbs 434 bound to specifically to one of the 25 Ags. I am going to discuss how we could select proper target Ags for therapeutic Abs and candidate clones are therapeutic agents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.164-167
• /
• 2003

In this study, we developed the mold for the plastic cavity filter which is a kind of a wireless communication device. Since the cavity filter is made of aluminium, the cost of fabrication is high and the production rate is low. But we can produce plastic cavity filter part by injection molding process with the mold which was designed by our team. The dimension and surface quality of plastic cavity filter was investigated by varying the molding method (conventional and MmSH process) and two different types of resin(PC/ABS and ABS). In case of ABS part, the shrinkage of the inner partition walls was decreased when we adopted MmSH method. The weight of both ABS and PC/ABS parts increased and the surface roughness decreased with MmSH process.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.3
• /
• pp.93-101
• /
• 2018

FDM is one of the popular 3D printing technologies because of an inexpensive extrusion machine and multi-material printing. FDM can use thermoplastics such as ABS and PLA. The 3D-printed ABS parts fabricated by FDM are attractive in the automotive industry because of their weight. A 10% reduction in weight can increase the fuel economy by approximately 7%. To use 3D-printed ABS parts as automotive parts, we should evaluate the 3D-printed parts in terms of automotive reliability. In this study, 3D-printed ABS samples were evaluated using Ono's rotary bending fatigue test. We obtained an S-N curve for the 3D-printed ABS specimen from the finite-element analysis. The S-N curve can be useful in early-stage design decisions for 3D-printed ABS parts.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.59-67
• /
• 1999

The lead time for new products is very limited in the current manufacturing processes, therefore the Rapid Prototyping process has been introduced and generally used in the industry. Fused Deposition Manufacturing (FDM) is one of the most common methods in this field. In the FDM process, the patterns are made of Wax of ABS and ABS shows better quality of the patterns. To date, the FDM/ABS patterns are used in investment casting for making silicon moulds to produce was patterns because it is very difficult to dewax FDM/ABS directly. The aim of this paper was to propose a feasibility of using FDM/ABS parts as wax-pattern substitutes in the investment casting process. The effects of casting conditions, such as pre-heat temperature and casting temperature, are provided. Comparisons with the conventional investment casting processes using the wax-patterns under the same prototype are made. Lead-time and saving cost are discussed in using FDM/ABS parts as was-pattern substitutes compared with the products from other rapid prototype systems.

• Elastomers and Composites
• /
• v.41 no.3
• /
• pp.172-181
• /
• 2006

Flame retardant synergism of phyllite was studied in ABS resins containing brominated flame retardant(tetrabromobisphenol A(TBBA) or brominated epoxy oligomer(BEO)) and antimony trioxide($Sb_2O_3)$. Talc was used for the comparison purpose. ABS compounds were manufactured by a twin-screw co-rotating extruder and subsequently injection molded into several specimen for mechanical and thermal properties. Flame retardancy of ABS compounds measured by UL 94 vertical test with 1.6 mm thick bar specimen was enhanced by the replacement of antimony trioxide into phyllite or talc in the range of 12.5%(0.5 wt%) to 37.5%(1.5 wt%). Phyllite showed better synergistic effect comparing with talc especially for BEO. Only phyllite enhanced the flowability of ABS compounds. Notched Izod impact strength decreased with the proportion of phyllite or talc content. Phyllite could replace the antimony trioxide up to the content of 25%(1 wt%) to give better flame retardancy and flowability without darkening problem.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.5
• /
• pp.140-147
• /
• 2001

The solenoid valve in ABS hydraulics, modulator is a two directional on-off valve and is controlled by around 100Hz high speed pulse width modulation. When the inlet valve is switched from open state to closed state, there are braking force degration, noise and vibration due to pressure surge phenomena in the hydraulic line and wheel cylinder. In this study, identifies pressure surge phenomenon in the braking process of a ABS, and investigates the way to reduce the phenomenon. For the purpose theoretical analysis on the pressure surge in the closed state hydraulic line, characteristic curve method based on wave equation was utilized. During this analysis, we could find pressure surge characteristics change due to hydraulic line change and PWM control conditions. In conclusion, by using the results of this study for the pressure surge prediction and reduction method, we could expect braking performance enhancement in Anti-Lock Braking System.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.609-611
• /
• 2000

ABS(Antilock Brake System), Prevents the wheels from "locking" and improve steering during braking. Currently, safety and environmental issues are a major concern in the automotive industry. ABS has become the vital brake system HILS (Hardware In-the-Loop Simulation) is an effective tool for design. performance evaluation and test of developed vehicle subsystems such as ABS. suspension. and steering systems. This paper describes a HILS model for an ABS/ASR application Also the design and implementation of HILS system for development of the ABS ECU(Electronic Centre) Unit) for commercial vehicle are presented.