• 제목/요약/키워드: ACM

검색결과 241건 처리시간 0.033초

비등온 TGA를 이용한 ACM 고무복합재료의 열분해 거동 연구 (Non-isothermal TGA Study on Thermal Degradation Kinetics of ACM Rubber Composites)

  • 안원술;이형석
    • Elastomers and Composites
    • /
    • 제48권2호
    • /
    • pp.161-166
    • /
    • 2013
  • 비등온 TGA 실험방법을 이용하여 가교 사이트가 서로 다른 chlorine cure-site ACM 고무와 carboxylic cure-site ACM 고무 두 종류에 대하여 열분해 거동을 연구하였다. 분해 반응이 최대인 점의 온도는 모든 승온 속도에서 carboxylic cure-site ACM 고무의 열분해 특성이 상대적으로 더 안정함을 보여 주었다. Kissinger의 해석 방법에 의한 활성화에너지는 chlorine cure-site ACM 및 carboxylic cure-site ACM 고무에 대하여 각각 118.6 및 105.5 kJ/mol로 나타났으며, Flynn-Wall-Ozawa의 해석방법에서의 전환율 0.1~0.2 범위의 평균과 유사한 값을 나타내었다. 반응차수 해석으로부터 두 시험편 모두 일반적인 고무와 유사한 다중 복합반응에 의하여 열분해 반응이 진행됨을 알 수 있었다.

자동차 엔진 개스킷용 아크릴 고무의 물리적 특성과 수명 예측에 관한 연구 (A Study on Physical Properties and Life Time Prediction of ACM Rubber for Automotive Engine Gasket)

  • 이형석;도종환;안원술;김철
    • Elastomers and Composites
    • /
    • 제47권3호
    • /
    • pp.254-258
    • /
    • 2012
  • 자동차 엔진 개스킷용 아크릴 고무(ACM)의 재료 특성과 수명 예측에 관하여 연구하였다. 클로린 가교사이트를 포함하는 ACM (Chlorine Cure-Site ACM)과 카르복실기 가교사이트를 포함하는 ACM (Carboxyl Cure-Site ACM)을 이용하여 최적상태의 배합물을 제작하여 특성을 살펴보았다. 엔진용 개스킷의 주요한 특성인 열과, 엔진오일에서의 압축영구줄음율을 시험 평가한 결과 Carboxyl Cure-Site ACM 배합물이 상대적으로 더 우수한 것으로 나타났다. Carboxyl Cure-Site ACM 고무 재료에 대한 수명을 예측하기 위해 가속열노화시험을 수행하여 시간-온도 환산식인 아레니우스(Arrhenius) 관계식을 구하였다.

전동식 직접 구동형 능동 엔진 마운트의 설계 (Design of Active Control Engine Mount Using Direct Drive Electrodynamic Actuator)

  • 박현기;이보하;이종원
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 춘계학술대회논문집
    • /
    • pp.1106-1111
    • /
    • 2007
  • This paper is focused on design of a new active control engine mount (ACM), which is compact in size and cost effective. The ACM, consisting of an electrodynamic actuator as the active element, flat springs and a sliding ball joint, is different in structure from the previous ACM designs based on the conventional hydraulic engine mount. Dynamic characteristics of the proposed ACM are extensively investigated before a prototype ACM, which meets the design specifications, is built in the laboratory. For cost effectiveness, a feed-forward control algorithm without a feedback sensor is used for reduction of the transmitted force through the ACM from the engine. The prototype ACM is then harmonic-tested with a rubber testing machine for verification of its control performance as well as adequacy of modeling. Experimental results show that the proposed ACM is capable of reducing the transmitted force by 20 dB up to the frequency range of 60 Hz.

  • PDF

위성 PEP시스템에서 ACM 지원을 위한 적응형 TCP 혼잡제어기법 (Adaptive Congestion Control Scheme of TCP for Supporting ACM in Satellite PEP System)

  • 박만규;강동배;오덕길
    • 한국위성정보통신학회논문지
    • /
    • 제8권1호
    • /
    • pp.1-7
    • /
    • 2013
  • 최근 위성 통신 시스템은 링크 가용도와 대역폭 효율을 증대시키기 위해 ACM(Adaptive Coding and Modulation) 기술을 사용하고 있지만, PEP(Performance Enhancing Proxy)에서 동작하는 TCP는 ACM 동작에 따라 변경된 물리계층 전송능력을 감지하지 못하고 작아진 BDP (Bandwidth Delay Product) 네트워크에 혼잡을 발생 시킨다. 본 논문에서는 ACM과 PEP를 사용할 때 발생되는 문제점을 극복하여 PEP의 성능을 향상시키는 기법을 제안한다. 이를 위해 ACM기능을 지원하는 물리/MAC(링크)계층 모듈과 전송계층 모듈인 TCP 간에 정보 전달 메시지를 적용하여 물리/MAC(링크)계층의 정보가 TCP에 전달되도록 하여 MODCOD (Modulation and Coding)에 따라 변경되는 물리계층 대역폭을 고려한 적응적인 TCP 혼잡제어를 수행하도록 하였다. 제안한 기법에 대해서 ns-2를 이용한 모의시험 결과 물리계층과 전송계층간의 전송 속도를 적응적으로 정합시킴으로써 네트워크의 혼잡을 미리 방지하고 최적화된 혼잡제어를 수행함으로써 PEP 성능을 향상 시킬 수 있음을 보였다.

단일추진시스템의 ACM 설계 및 사례연구 (A Design of Automated Contingency Management and Case Study for Monopropellant Propulsion System)

  • 이영진;이권순
    • 한국항공운항학회지
    • /
    • 제16권2호
    • /
    • pp.1-11
    • /
    • 2008
  • Increasing demand for improved reliability and survivability of mission-critical systems is driving the development of health monitoring and Automated Contingency Management (ACM) systems. An ACM system is expected to adapt autonomously to fault conditions with the goal of still achieving mission objectives by allowing some degradation in system performance within permissible limits. ACM performance depends on supporting technologies like sensors and anomaly detection, diagnostic/prognostic and reasoning algorithms. This paper presents the development of a generic prototype test bench software framework for developing and validating ACM systems for advanced propulsion systems called the Propulsion ACM (PACM) Test Bench. The architecture has been implemented for a Monopropellant Propulsion System (MPS) to demonstrate the validity of the approach. A Simulink model of the MPS has been developed along with a fault injection module. It has been shown that the ACM system is capable of mitigating the failures by searching for an optimal strategy. Furthermore, the concepts of Validation and Verification (V&V) of such systems are introduced with relevant examples.

  • PDF

다층구조에서 도체 두께를 고려한 비대칭 결합선로의 특성해석 (Characteristic Analysis of the Asymmetric Coupled microstrip Lines with finite Metalization Thickness in the Multilayered Structure)

  • 윤남일;홍익표;박한규
    • 한국통신학회논문지
    • /
    • 제25권3A호
    • /
    • pp.424-429
    • /
    • 2000
  • 본 논문에서는 준정적 해석방법을 사용하여 다층 구조에서 유한한 도체 두께를 갖는 비대칭결합 마이크로스트립(ACM: Asymmetric Couple Microstrip) 선로의 특성을 연구하였다. 준정적 해석방법으로서 모드정합법을 이용하였으며, ACM 선로의 특성 임피던스와 유효 유전율 상수가 도체 두께의 함수로 나타나는 결과를 얻었다. 수치해석 결과를 통해서 단층 및 다층구조에서 도체 두께의 변화로 인하여 ACM 선로의 전파특성이 변화되는 것으로 나타났다.

  • PDF

항공기용 ACM(Air Cycle Machine) 설계 및 공력성능시험

  • 현용익;김진한;김춘택;차봉준;이대성;김승우;천익정
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 1997년도 강연회 및 연구개발 발표회 논문집
    • /
    • pp.58-73
    • /
    • 1997
  • 본 연구는 항공기용 환경제어계통의 시스템관련 제반 기술 및 그 핵심요소인 ACM(Air Cycle Machine)시제기의 개발을 통하여 국내의 여런 항공기개발 사업과 관련하여 급속히 요구되고 있는 항공기의 sub-system을 국산화할 수 있는 기술축적을 목적으로 수행되었다. 본 연구에서는 항공기용 환경제어장치(Environmental Control System : ECS)를 개발대상으로 하여 그 핵심부품인 Air Cycle Machine의 시제품을 순수 국내 기술로 설계/제작하였고, 자체 개발한 성능시험기를 이용하여 성능시험을 수행하였으며 또한 ACM 성능을 검증하기 위하여 기존제품의 자료와 비교하였다. 향후 이 시스템의 상품화를 위해서는 구동축의 무윤활 베어링에 대한 연구가 병행되어 주유동의 오일오염을 국소화시키는 시스템보완이 요구된다. 항공기용 환경제어장치(ECS)의 시스템해석부터 ACM의 공력/구조설계, 제작, 시험등 일련의 개발과정을 통하여 시스템에 대한 해석능력이 향상되었고, 그 핵심요소인 ACM의 순수 국산화개발이 가능하다는 판단을 내릴 수 있었다. 또한, ACM을 구성하고 있는 원심압축기와 반경류형 터빈의 제작 및 시험법은 유사 시스템 및 일반 터보기계류의 국산화개발에 유용하게 이용될 것으로 기대된다.

  • PDF

천리안 위성을 이용한 위성통신 공공 테스트베드 포워드링크 ACM 구축을 위한 예측기법 연구 (A Study on Prediction method for Forward link ACM of Satellite Communication Public Testbed via COMS)

  • 류준규;홍성용
    • 한국위성정보통신학회논문지
    • /
    • 제7권1호
    • /
    • pp.82-85
    • /
    • 2012
  • 본 논문은 천리안 위성을 이용하여 운용중인 공공 테스트베드의 가용율 및 시스템 throughput 향상을 위해 포워드 링크 ACM(Adaptive Coding & Modulation) 방안에 대해 소개하고, 포워드링크에 ACM 기능을 구현하기 위한 채널 상태를 예측하기위한 알고리즘으로 기울기를 이용한 예측 기법과 LMS(Least Mean Square)를 이용한 예측 기법의 성능을 비교하였다. 시뮬레이션 결과 LMS 기법을 이용한 예측기법은 99%가 3dB 이내의 예측 오차를 보였고, 기울기를 이용한 예측 기법은 99%가 4.5dB 이내의 예측 오차를 갖음을 알 수 있다.

투구게로부터 단리된 항균성 펩티드의 구조-활성에 관한 연구 (Studies on the structure-activity of antimicrobial peptide isolated from horseshoe crab)

  • 이형호;박장수;박남규
    • 한국어병학회지
    • /
    • 제9권1호
    • /
    • pp.65-77
    • /
    • 1996
  • Tachyplesin I은 투구게로부터 단리된 항균성 펩티드이다. 인지질막에 대한 tachyplesin I의 작용 메카니즘을 조사하기 위해서 tachyplesin I 및 5개의 유도체를 액상법으로 합성하였다. 합성한 5개의 유도체는 [$Phe^2$]-tachyplesin I, [$Phe^{8,13}$]-techyplesin I, S-S결합을 가지지 않는 [$Cys(Acm)^{3,7,12,16}$]-tachyplesin I 및 [$Cys(Acm)^{3,7,12,16}$]-tachyplesin I 의 단편인 7(Acm)과 10(Acm)이다. 원편광이색성 (CD) 스펙트럼에서 tachyplesin I은 완충액에서 역평행 $\beta$-구조를 취하며 산성 지질막하에서는 완충액보다 약간 불규칙적인 구조를 가진다. Carboxyfluorescein 누출 실험결과 tachyplesin은 중성 및 산성 지질막과 강하게 상호 작용 하였다. 또한 형광 실험하에서는 펩티드의 소수성 부분이 인지질막의 내부에 존재하였다. 7(Acm) 및 10(Acm) 유도체를 제외한 모든 펩티드들은 lipopolysaccharide결합에 있어 거의 유사한 활성을 나타냈었다. 따라서 지질이중막은 tachyplesin I을 안정한 $\beta$-구조로부터 덜 규칙적인 구조로 구조적 변화를 유도한다고 여겨진다.

  • PDF

ACM의 비글견을 이용한 단회 경구투여 용량증가 독성 시험 및 4주 반복 경구투여 용량 결정 시험 (Single Oral Dose-increasing Toxicity Test and Four Weeks Repeated Oral Dose Determinating Test of ACM (Added Chongmyung-tang) in Beagle Dogs)

  • 임정화;이상룡;정인철
    • 동의신경정신과학회지
    • /
    • 제24권1호
    • /
    • pp.131-144
    • /
    • 2013
  • Objectives : To provide information on the safety of ACM, we carried out a single oral dose-increasing toxicity and 4-weeks repeated oral dose determining test of ACM in beagle dogs. Methods : In a single oral dose-increasing toxicity test, beagles were treated with ACM orally increasing dose level (1,000, 2,000, 5,000 mg/㎏) at interval of 3 days. After administration, signs of toxicity were observed for two weeks. In 4-weeks repeated oral dose determinating test, beagles were treated with ACM with oral dose 500, 1,000, 2,000 mg/kg for 4 weeks. Mortality, clinical signs, body weight changes, food consumption, urinalysis, hematological and biochemical parameters, organ weights, necropsy findings, and histological findings were monitored during the study period. Results : In a single oral dose-increasing toxicity test, we found no mortality, abnormalities in clinical signs, body weight, and necropsy findings during the study period. In 4-weeks repeated oral dose determinating test, we found no mortality, abnormalities in clinical signs, body weight, food consumption, urinalysis, hematological and biological parameters, gross findings, organ weights, necropsy findings, and histopathological findings in any of the beagles tested. Conclusions : The results obtained in these studies suggest that maximum tolerated dose (MTD) of ACM in male and female beagle dogs was supposed to be over 5,000 mg/kg. For the future studies of toxicity, it is advisable that high dose and low dose are set at 2000 mg/kg and 500 mg/kg, respectively.