• 한국식품과학회지
• /
• 제37권3호
• /
• pp.364-371
• /
• 2005

개발된 항균 포장 원지를 이용하여 포장 봉지(packaging bag)와 골판지 포장 상자(corrugated box)를 제작하였고, 여기에 과채류를 포장하였을 때 일반 포장 봉지나 골판지 상자에서 포장된 과채류 보다 변패 미생물의 발생이나 생체중 감소가 상당히 줄어들었다. 이는 BAAG에 의해 과채류의 변패에 관여하는 미생물의 생육을 차단하였고, 제올라이트에 의해 과채류의 조직을 빠르게 연화시키는 기체들인 에틸렌가스, 이산화탄소 및 산소가 제거되었으며, AKD에 의해 과채류가 보유한 수분 손실을 최소한으로 일어나게 하였기 때문이다. 결론적으로 BAAG, 제올라이트, 그리고 AKD로 처리된 포장 원지를 이용하여 제작한 포장대(packaging bag)과 골판지 포장 상자는 저장 과채류의 선도를 유지하는 데 탁월한 효과를 발휘하였고, 기능성 첨가제의 처리로 인한 제조 원가의 상승은 폐기 과채류의 양이 감소하면서 상쇄시킬 수 있었다. 따라서 일반 골판지 상자에 저장된 과채류보다는 기능성 골판지 상자에 저장하는 방법이 보다 경제적인 저장 방법이 될 수 있음을 확인하였다.

• 펄프종이기술
• /
• 제42권1호
• /
• pp.64-73
• /
• 2010

This study was conducted to modify the surface properties of papers by formation of hydrophobic self-assembled monolayer(SAM) on paper surface with silanes. A base paper I(0.5% AKD) and base paper II(1.0-1.5% AKD) were reacted with silanes(PFDTES, DMDCS, MODDCS) by immersion method and vapor deposition method. Hydrophobic SAMs(contact angle value>$120^{\circ}C$) were obtained on all papers after treatment with $10^{\mu}l$ PFDTES for 15min, with $50^{\mu}l$ DMDCS for 30min, with $50^{\mu}l$ MODDCS for 300min. When applying PFDTES to paper surface, lower silane concentration and shorter reaction time were required, whereas MODDCS with long alkyl chain required the longest reaction time of 300min. The st$\ddot{o}$ckight sizing degree of silane treated papers were increased between 105sec(base paper I) and 130sec(base paper II). The wet tensile strength of PFDTES-treated base papers(I, II) increased by 10-34% after SAM formation. However, the wet tensile strength of the DMDCS-treated base paper(I) was found to decrease from 0.067kN/m to 0.038kN/m; this may due to the cellulose degrading as a result of generated hydrogen chloride when hydroxyl group of cellulose were reacted with DMDCS. No apparent changes of PPS roughness on silane-treated papers are observed. The ATR-IR spectrum showed absorption peak located at 465 and 1200cm-1 which can be assigned to the Si-O-C asymmetric stretching and Si-O-C bonds, respectively.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 제32회 펄프종이기술 국제세미나
• /
• pp.33-55
• /
• 2007

This article portrays special cellulose fibers, which are designed to be a functional additive and a carrier for papermaking chemicals. The first part of the presentation deals with the micronized $ARBOCEL^{(R)}$ cellulose fibers, which are used as a functional paper/paperboard additive. In particular as a bulk and speed aid. The detailed description of the micronized $ARBOCEL^{(R)}$ fibers, their function and effects on papermaking process and paper products are given. The second part of the study describes the concept of fiber-based papermaking chemicals. A new generation of fiber-based papermaking chemicals were presented for the first time at the PTS Pulp Technology Symposium 2005, and then several articles were published in various magazine in Asia ("Paper Asia"), the US ("Pulp & Paper"). and Europe ("Wochenblatt fuel Papierfabrikation"). The information generated quite an interest in the paper industry. Extensive studies of these papermaking additives have been made recently, new information obtained, and the compounds have gained more recognition in the industry. The company J. Rettenmaier und Soehne developed a group of fiber-based papermaking additives. They include combination of fibers with sizing agents, starch, fluorochemicals, minerals, biocides and some others. This article presents in-depth study of the AKD modified micronized cellulose as an example of the fiber-based papermaking chemicals concept. The material of the present paper is based mostly on the results of the pilot paper machine study at the Paper Research Institute PTS (Heidenau, Germany), and includes case studies from the mills, which used $ARBOCELPLUS^{(R)}-AKD$ compounds. It should be noted that the $ARBOCELPLUS^{(R)}$ compounds were not designed to replace traditional additives in paper industry. They should rather be used in those areas, where application of "normal" chemicals is especially problematic

• 한국과학교육학회지
• /
• 제5권2호
• /
• pp.81-88
• /
• 1985

The purpose of the study was to establish a new view of textbook which may contribute to the abolishment of the instruction mainly based on the only textbook and to the promotion of creativities of students. We first reviewed science textbooks and related teaching-learning materials of foreign countries with emphasis on the relationship among textbook and teaching-learning materials and practical use of them. In western countries the roles of traditional textbook has been changed. That is, various kinds of materials such as reading book, work-book, worksheet, experimental guidebook, filmstrips are used to raise effect of instruction besides of traditional type of textbook. Secondary, we identified the problems related to the science textbook-view of textbook, textbook contents, practical use of textbook-through opinion survey administered to principals akd teachers of elementary schools. The results of the survey are as follows; Concerning the view of textbook, most teachers did not recognize textbook as an absolute materials. They thought that textbook contents could be taught reorganized according to their judgements. On the contrary, teachers responded to the question of whether or not they follow contents of textbook as they are presented in it were approximately 30%. Further, more than 75% of them have seldom used instructional materials except textbooks. In order to revise the problems of our present textbook as stated above, a new view of textbook should be established. We, above all, established 4 basic premises for searching a new view of textbook. 1) Textbook should not be considered as the only material but as being at the center of various teaching -learning materials. 2) The importance of textbook should be illustrated Among Curriculum, textbook and related teaching-learning materials, instruction and evaluation. 3. Textbook contents should not be regarded as definitely fixed or absolute ones. 4. Human being can understand environment more fully by commanding his swnsory organ multilaterally. Under these premises we disscussed about curriculum and textbook, textbook, and instruction, akd evaluation method.

• 펄프종이기술
• /
• 제34권3호
• /
• pp.1-8
• /
• 2002

The object of this study was to determine the surface energy of hydrophobically modified micro-crystalline cellulose (MCC) with AKD and evaluate the effect of surface energy of the solid particles dispersed in aqueous medium on flotation efficiency. Especially to eliminate the complication derives from the diverse parameters of solid particles including particle size, type, etc. MCC's modified with AKD have been used. The surface energy Parameters were calculated from advancing contact angles of apolar and polar liquids on MCC pellets using the Lifshitz-van der Waals acid-base (LW:AB) approach. Total surface energy of hydrophobic MCC ranged from 46.19 mN/m to 48.60 mN/m. The contribution of the acid-base components to the total surface energy ranged form 13% to 17% for hydrophobic MCC's. The effect of surface characteristics on the flotation efficiency was evaluated. It was shown that there exist critical values of surface energies to increase flotation efficiency. Total surface energy and polar component of solid particles should be lower than 47 mN/m and 7 mN/m, respectively, for effective removal in the flotation process.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권5호
• /
• pp.1-8
• /
• 2023

해양 및 수리구조물은 수분침투뿐만 아니라 해양의생물의 부착 등에 의해서도 내구손상이 발생하게 된다. 따라서 본 연구에서는 해양 콘크리트 등을 위해 자가세척기능을 갖는 방오 코팅제를 개발하고자 하였다. AKD와 셀룰로오스 나노섬유 및 BADGE를 혼합한 방오코팅제를 접촉각 140°내외의 소수성과 기울임각 15°에서 충분한 방오성능 확보한 것으로 확인하였다. 표면의 내마모성 시험에서는 최대 0.015g의 손실만이 발생하는 것으로 나타났다. 내구성 실험에서도 염소이온투과시험결과 코팅제가 도포된 변수에서는 염소이온의 투가가 거의 발생하지 않았으며, 탄산화와 동결융해 손상 또한 역시 거의 발생하지 않아 콘크리트의 내구성 확보에서도 효과가 있는 것으로 분석되었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2003년도 추계학술발표논문집
• /
• pp.148-153
• /
• 2003

The influence of sizing, fiber and pigment type on coating penetration, using commercial paper and two types of handsheets as the base paper which were prepared from thermomechanical pulp(TMP) and hardwood bleached kraft pulp(KP) sized internally with alkyl ketone dimmer(AKD), was studied in terms of characteristics of coating holdout. Laboratory rod draw down coater was used for surface sizing and coating application. Characterization of coating penetration was done by measuring the roughness of the backside of coating layer. The backside of the coating was exposed by dissolving the fibers in a solution of cupriethylenedimine(CED). Data show that internal sizing of base paper is effective and surface sizing is more effective to prevent coating penetration. Comparing between the two types of base papers, backside roughness of coating layer of TMP sheet is much larger and sizing is more effective to reduce coating penetration than those of KP sheet. With regard to pigment type, clay is more effective than calcium carbonate for better coating holdout.

• 펄프종이기술
• /
• 제33권1호
• /
• pp.1-7
• /
• 2001

The immediate purposes of this study is to establish the surface chemical principles associated with the flotation process of waste papers and to verify them by practical flotation experiments. To achieve this AKD sized hydrophobic microcrystallince cellulose (MCC) with different levels of hydrophobicity, and hydrophilic MCC dyed with black were prepared as model substances. The effects of surface characteristics on flotation efficiency were evaluated by measuing the brightness of the flotation rejects obtained after the flotation experiments carried out using MCC mixtures prepared with different ratios of hydrophobic and hydrophilic MCCs. Results showed that more than 90% of the flotation rejects consisted of hydrophobic MCC indicating the critical importance of the hydrophobicity of the materials in the flotation process. The proportions of hydrophobic materials in the reject remained constant when highly sized MCC was used as a model of hydrophobic substance.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.24-29
• /
• 1998

This study was carried out in order to elucidate the deterioration mechanism of paper according to various sizing chemicals. No additive paper and four kinds of papers containing rosin-alum, alum only, alkylketene dimer(AKD)-cation polymer and cation polymer only were treated by UV light to study changes of water-resistant, optical and mechanical properties from the view points of natural deterioration of paper. Since rosin chemicals have UV absorption at the relatively long wavelength region, rosins are degraded to form hydrophilic groups such as carboxylic acid from their double bonds by UV treatments. These phenomena caused the decreasing of sizing degree and wetting time in case of rosin-sized paper, while the UV treatments brought about the slight increase of wetting time in rosin-free papers such as no additive, alum and kymene only paper owing to the auto-sizing effect. Optical properties were primarily influenced by sizing chemicals. Rosin-sized paper showed lower brightness after UV and near UV treatment because of its UV instability.

• 한국가구학회지
• /
• 제19권3호
• /
• pp.172-179
• /
• 2008

The objective of this study was to investigate the influence of the water repellents' treatment on the water absorptivity and the dimensional stability of Korean red pine wood(Pinus densiflora). The alkylketene dimer(AKD), fluororesin emulsion(Wood-seal, WS), and paraffin wax emulsions(PW25, PW40, and PW1200) were used as water repellents. PW40 and WS were proved as excellent water repellents for pine wood, because the samples treated with these agents showed high contact angles and large reduction in water absorptivities. Also, the dimensional stability(antiswelling efficiency) of pine wood was considerably improved by water repellents treatments, such as PW40 and WS at the pressure of 2MPa. The water repellent treated woods with WS, PW40, and PW1200 at the pressure of 2MPa were relatively stable to the wet-dry cyclic leaching test.