• 한국수소및신에너지학회논문집
• /
• 제29권2호
• /
• pp.163-169
• /
• 2018

The present article discusses about the measurement techniques of acoustic impedance that becomes one of the important acoustic characteristics of various boundaries found inside of propulsion systems. Acoustic characteristics including acoustic impedance and reflection coefficient can be often assessed and estimated by use of the two-microphone method. Theoretical expressions of acoustic impedance and reflection coefficient measured in an impedance tube are presented for both cases with mean flow and without flow, and the practical application of the method through calibration is also provided. The acoustic impedance and the reflection coefficient are related with axial locations of microphones, thermodynamic characteristics of gas inside, and the transfer function between the pressure wave measurements at multiple locations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1238-1243
• /
• 2002

In this study, the validity of the acoustic impedance model and the estimation model by electro-acoustic analogy suggested by Maa for predicting the absorptive performance of multiple layer perforated plate systems is investigated. From the comparison between the experiment and calculation for the absorption performance of double layer perforated plate system, the calculated results of using Rao and Munjal's impedance model and transfer matrix method are closer to the experimental values than those of using Maa's impedance model and electro-acoustic analogy. Therefore, in order to apply the acoustic impedance model and the estimation model by electro-acoustic analogy suggested by Maa to the multiple layer perforated plate systems, it is necessary that the suggested acoustic impedance and estimation models should be re-examined.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.291-298
• /
• 2005

고주파 연소불안정 제어를 위하여 사용되는 음향공에 대하여, 3차원 선형 음향해석을 수행하여 음향공의 감쇠 능력을 정량화하고자 하였다. 공진주파수는 상온에서 고전적 이론에 의한 공진주파수와 약 $6\%$, 압력 비에 의한 결과와는 약 $10\%$의 차이를 보임을 확인하였다. 감쇠 능력의 정량화를 위하여 acoustic impedance를 도입하여 흡수계수와 conductance를 도출하였다. 음향공의 개수에 따른 acoustic impedance 특성을 살펴보았고, 기존의 결과와 정량적으로 유사함을 확인하였다. 기하학적으로 동일한 음향공이 여러 개 설치된 연소실에서는 음향장의 특성과는 상관없이 각각의 음향공이 동일한 특성을 보임을 확인하였고, 최적의 음향공의 개수를 판정하는 것은 하나의 음향공의 acoustic impedance를 제대로 정량화하여 가능하다. 이로써 acoustic impedance를 도입하여 음향공의 최적 동조를 위한 설계 절차를 확립하였다.

• 한국소음진동공학회논문집
• /
• 제22권12호
• /
• pp.1199-1205
• /
• 2012

An empirical acoustic impedance model of acoustic resonators with extended neck at a high sound pressure environment is proposed. The acoustic resonator with extended neck into its cavity is appropriate for the launcher fairing application because the length of neck does not increase the total height of the resonator. This enables one to design slim and light acoustic resonators for launch vehicles. The suggested acoustic impedance model considers the incident pressure and geometric variables(the neck length, the perforation ratio and the hole diameter) in terms of non-dimensional variables. Several acoustic resonators with extended neck are manufactured and their wall impedances are measured according to the pre-defined incident pressure levels. Effects of non-dimensional variables on the non-linear acoustic impedance are investigated so that a simple non-linear impedance model for the launcher fairing application can be proposed. It is demonstrated that the estimated acoustic resistance and acoustic length correction show reasonable agreement with the measured ones within the range of design parameters for launcher fairings.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.25-29
• /
• 1994

The effect of moisture content on acoustic absorption coefficient and impedance of the woods of Pinus densiflora, Chamaecyparis pisifela, Cryptomeria japonica, Abies koreana, Melia azedarch var. japonica, Shorea bracteolata and Shorea acuminata was investigated by standing wave method. The results obtained are summarized as follows: The acoustic absorption coefficient increased with increasing moisture content, but acoustic impedance decreased with increasing moisture content.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.344-348
• /
• 2007

The acoustic liner has been used for the suppression of noise. The impedance characteristics of the acoustic liner are increased by the incident pressure. For the estimation of the acoustic liner on the incident acoustic pressure effect, the modified impedance model is suggested on the basis of the GE impedance prediction model. The modified impedance model is originated from the 3 parameter impedance model, and extended to the incident pressure parameter. The modified model is applied on the simple duct analysis with variant source pressure. Through the computation, it is observed that the fore directivity patterns of the duct are varied by the incident SPL level.

• 한국소음진동공학회논문집
• /
• 제23권10호
• /
• pp.920-927
• /
• 2013

The requirement of acoustic performance about underwater acoustic material which is used in underwater environment more increases. Underwater acoustic material was made by viscoelastic material such as a rubber and a polyurethane etc. In order to increase an acoustic performance, several kinds of inclusions were added to viscoelastic material. In this paper, acoustic modelling and analysis techniques were introduced and the acoustic characteristics of underwater acoustic material were studied. Echo reduction and transmission loss were calculated with volume fraction of inclusion in the material. Also the characteristic impedance and the input impedance of underwater acoustic material were obtained and effects on the echo reduction and transmission loss of material were discussed.

• 한국소음진동공학회논문집
• /
• 제14권8호
• /
• pp.668-674
• /
• 2004

The possibility of global noise reduction by the sound power control through selection of distribution and impedance of absorptive materials is discussed. It is necessary to investigate the relation between the global sound energy in the field and the total sound power radiated by sources. In the previous work,$^{(1.2)}$ the authors presented a useful design method to change boundary condition that can be useful to reduce noise in acoustically small enclosures. Changing boundary condition Is related to not only enclosure’s geometrical shape but also acoustical treatment on walls for example, attaching of impedance patches (ex: absorptive material). In many practical situations, we often meet situation to change acoustical treatment on walls. The possibility of total acoustic potential energy(globa1 noise) reduction by acoustic source power control is examined in an acoustically small cavity Using acoustic energy balance equation, the relation between global noise control performance and absorptive material’s arrangement/impedance is deduced. Numerical simulation is performed to interpret its physical meaning in terms of absorbent’s distribution and impedance.

• 항공우주기술
• /
• 제5권2호
• /
• pp.195-204
• /
• 2006

로켓엔진에서의 고주파 연소불안정을 제어하기 위하여 널리 사용되는 음향공에 대하여, 3차원 선형 음향해석을 수행하여 음향공의 감쇠 능력을 정량화하고자 하였다. 선형음향해석에 의한 공진주파수는 상온에서 고전적 이론에 의한 공진주파수와 약 6% 압력 비에 의한 결과와는 약 10%의 차이를 보임을 확인하였다. 음향공의 개수에 따른 acoustic impedance 특성을 살펴보았고, 본 연구의 결과가 기존의 결과와 정량적으로 유사함을 확인하였다. 기하학적으로 동일한 음향공이 여러 개 설치된 연소실에서는 음향장의 특성과는 상관없이 각각의 음향공이 동일한 acoustic impedance 특성을 보임을 확인하였다. 이로써 acoustic impedance를 도입하여 음향공의 최적 동조를 위한 설계 절차를 확립하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.688-691
• /
• 2004

We have studied the possibility of global noise reduction by the sound power control through selection of distribution and impedance of absorptive materials. It is necessary to investigate the relation between the global sound energy in the field and the total sound power radiated by sources. In the previous work (1,2), the authors presented a useful design method to change boundary condition that can be useful to reduce noise in acoustically small enclosures. The possibility of total acoustic potential energy reduction by acoustic source power control is examined in an acoustically small cavity. Using acoustic energy balance equation, the relation between global noise control performance and absorptive material's arrangement/impedance is deduced. Numerical simulation is performed to interpret its physical meaning in terms of absorbent's distribution and impedance.