• Journal of Multimedia Information System
• /
• 제2권4호
• /
• pp.317-326
• /
• 2015

The paper deals with the analysis of the effectiveness of acoustic emission monitoring and diagnostics of engineering products. We discuss the results of the processing results of the field experiment to study the acoustic emission in the alloy and its welded joints in the presence of technological defects. We study the characteristics of the output of acoustic emission signals at different stages of elastic-plastic deformation of alloys. Analyzed acoustic chart and the output waveform of the acoustic emission for the different types of welds. Studies have shown the effectiveness of the Acoustic emission techniques and help improve the accuracy of non-destructive testing systems in problems of automation and control.

• 동력기계공학회지
• /
• 제12권5호
• /
• pp.65-70
• /
• 2008

The purpose of this study is to verify availability of the acoustic emission in-situ monitoring method to the internal leak and operating conditions of the turbine major valves relating to safety for turbine operating and prevention of turbine trouble at nuclear power plants. In this study, acoustic emission tests are performed when the pressurized electro-hydraulic control oil flowed through turbine electro-hydraulic controller oil check valve and turbine power/trip fluid solenoid valve in the condition of actual turbine operating. The acoustic emission method was applied to the valves at the site, and the background noise was measured far the abnormal plant condition. To judge for the leak existence ell the object valves, voltage analysis and frequency analysis of acoustic signal emitted from infernal leak in the valve operating condition are performed. It was conformed that acoustic emission method could monitor for valve internal leak to high sensitivity.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권1호
• /
• pp.16-23
• /
• 2002

To understand the micro-mechanical changes and the effects of the fluoride on rat's femur after administration of sodium fluoride, the three-point bending test, acoustic emission analysis during the three-point bending test and scanning electron microscopy were performed. The obtained results were as follows: 1. Bone strength increased in the rats given 1, 5, 10 and 20 ppm of fluoride but, there were no statistical significances (p>0.05). 2. With increasing the concentration of fluoride, most AE events released rapidly just before the maximum load and smaller events were recorded than the control group's. The average of cumulative AE event counts until maximum load of the femur in 20 ppm group were significantly small with respect to the control group's (p<0.05). 3. Fracture surfaces were well coincide with the results of acoustic emission behavior. Analyses of fracture surfaces indicated that, consistent with its the highest load, rat femur in 20 ppm fluoride group displays the roughest surface.

• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.26-32
• /
• 2007

This study was carried out fusion-welded butt joints in SWS 490A high strength steel subjected to tensile test that load-deflection curve. The windowed or short-time Fourier transform(WFT or STFT) makes possible for the analysis of non-stationary or transient signals into a joint time-frequency domain and the wavelet transform(WT) is used to decompose the acoustic emission(AE) signal into various discrete series of sequences over different frequency bands. In this paper, for acoustic emission signal analysis to use a continuous wavelet transform, in which the Gabor wavelet base on a Gaussian window function is applied to the time-frequency domain. A wavelet transform is demonstrated and the plots are very powerful in the recognition of the acoustic emission features. As a result, the technique of acoustic emission is ideally suited to study variables which control time and stress dependent fracture or damage process in metallic materials.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.342-348
• /
• 2005

This study was carried out fusion-welded butt joints in SWS 490A high strength steel subjected to tensile test that load-deflection curve. The windowed or short-time Fourier transform (WFT or SIFT) makes possible for the analysis of non-stationary or transient signals into a joint time-frequency domain and the wavelet transform (WT) is used to decompose the acoustic emission (AE) signal into various discrete series of sequences over different frequency bands. In this paper, for acoustic emission signal analysis to use a continuous wavelet transform, in which the Gabor wavelet base on a Gaussian window function is applied to the time-frequency domain. A wavelet transform is demonstrated and the plots are very powerful in the recognition of the acoustic emission features. As a result, the technique of acoustic emission is ideally suited to study variables which control time and stress dependent fracture or damage process in metallic materials.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.135-136
• /
• 2012

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.77-84
• /
• 2002

Measurements of NO and NOx emission of laminar partially premixed LPG/air flames with and without acoustic excitation are reported. The NOx emission at the tailpipe of a combustion chamber is determined by chemiluminescent analyser. The NOx measurements are taken in flames with several different center tube equivalance ratio( ø$\sub$o/), and overall equivalace ratio(ø$\sub$o/) for a fixed fuel flowrate. The NOx emission decrease to reach a minimum value at an optimum ø$\sub$c/ 2. Theø$\sub$c/ 2 flame gives a compromise of thermal NO and prompt NO mechanism. In the case of excitation. the visual shape of the flame is changed from laminar flame to turbulent-like flame. With increasing levels of excitation amplitude, an optimum value of the NO and NOx emission exists. A shorter flame caused by the enhanced upstream mixing due to acoustic excitation results in the reduction of NO and NOx emission in the present flames. The reduction of flame length affects the shorter residence time of center tube mixture, and significantly influences the NOx reduction.

• 비파괴검사학회지
• /
• 제23권5호
• /
• pp.488-496
• /
• 2003

본 연구에서는 금속재 연소관내부에 단열고무/내열복합재로 구성된 연소관 조립체의 품질평가에 적용 가능한 음향방출 비파괴 시험 평가 기법을 정립하기 위하여 그간 수행되었던 시험결과를 종합하여 실제 생산에 적용 가능한 평가 기법을 정립하였다. 유한요소 code를 사용하여 연소관 조립체 구조 해석한 결과를 바탕으로 내열복합재에 절개선이 있는 연소관 표면의 스트레인과 절개선이 없는 연소관 표면의 스트레인 값을 비교하였다 해석결과는 공압시험 중 연소관 표면에 부착된 스트레인 값과 음향방출센서로부터 측정된 신호와 비교함으로써 연소관과 단열고무 접착성이 확인되었다. 음향방출법을 이용하여 금속재 연소관과 단열고무와의 접착성을 평가하는 방법으로서 실제 생산과정에 적용 가능함을 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.153-165
• /
• 1992

Dental composite resin is a kind of the particle - reinforced composite material, and is widely used in recent dental restoration of anterior and posterior tooth region. The purpose of this study was to investigate the fracture behaviour according to volume fractions and external findings of the filler particles for better interpretation of the fracture characteristics of posterior dental composite resins by analytic method of fracture mechanics. The plane strain fracture toughness($K_{IC}$) and Acoustic Emission were determined with three - point bending test using the single edge notch specimen according to the ASTM - E399, and its analyzed data was compared with filler volume fractions derived from the standard ashing test and scanning electron fractographs of each specimen including the unfilled experimental resin as a control. The results were that the value of fracture toughness of the composite resin material was in the range from 0.85 MPa$\sqrt{m}$ to 1.60 MPa$\sqrt{m}$ and was higher than the value of the unfilled experimental resin, and the fracture behaviours dervied from Acoustic Emission analysis show prominent differences according to the volume fraction and the size of filler particles used in each composite resin. The degree of resistance against crack propagation seems to be increase and the fractographs demonstrate the high degree of surface roughness and irregularity according with the increase of fracture toughness value.

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.186-193
• /
• 1999

Sensor feedback for process control is one of the essential elements is an automated deburring procedure. This paper presents the implementation of acoustic emission (AE), which has been developed as a feedback sensing technique for precision (mechanical) deburring, in a precision laser deburring process. AE signals were sampled for laser machining/deburring under various experimental conditions and analyzed using several signal-processing methods including AErms and spectral analysis. The results, such as the sensitivity of AE signals for different laser cutting depths, edge detection capability and the frequency analysis show a clear correlation between physical process parameters and the AE signals. A subsequent control strategy for deburring automation is also briefly discussed.