• Korean Journal of Mathematics
• /
• v.21 no.3
• /
• pp.271-283
• /
• 2013

In this paper, a generalized Adams-Moulton method that is a $m$-step method derived by using the Taylor's series is proposed to solve the satellite orbit determination problem. We show that our proposed method has produced much smaller error than the original Adams-Moulton method. Finally, the accuracy performance is demonstrated in the satellite orbit correction problem by giving a numerical example.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.201-208
• /
• 2019

Numerical integration is necessary for satellite orbit determination and its prediction. The numerical integration algorithm can be divided into single-step and multi-step method. There are lots of single-step and multi-step methods. However, the Runge-Kutta method in single-step and the Adams method in multi-step are generally used in global navigation satellite system (GNSS) satellite orbit. In this study, 4th and 8th order Runge-Kutta methods and various order of Adams-Bashforth-Moulton methods were used for GLObal NAvigation Satellite System (GLONASS) orbit integration using its broadcast ephemeris and these methods were compared with international GNSS service (IGS) final products for 7days. As a result, the RMSE of Runge-Kutta methods were 3.13m and 4th and 8th order Runge-Kutta results were very close and also 3rd to 9th order Adams-Bashforth-Moulton results. About result of computation time, this study showed that 4th order Runge-Kutta was the fastest. However, in case of 8th order Runge-Kutta, it was faster than 14th order Adams-Bashforth-Moulton but slower than 13th order Adams-Bashforth-Moulton in this study.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.3
• /
• pp.133-141
• /
• 2007

A finite element model is developed for the extended Boussinesq equations that is capable of simulating the dynamics of long and short waves. Galerkin weighted residual method and the introduction of auxiliary variables for 3rd spatial derivative terms in the governing equations are used for the model development. The Adams-Bashforth-Moulton Predictor Corrector scheme is used as a time integration scheme for the extended Boussinesq finite element model so that the truncation error would not produce any non-physical dispersion or dissipation. This developed model is applied to the problems of solitary wave propagation. Predicted results is compared to available analytical solutions and laboratory measurements. A good agreement is observed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.11
• /
• pp.2804-2811
• /
• 2000

A Nordsick form opf the multirate integration scheme has been proposed for flexible multibody dynamic systems. It is assumed that vibrational modal coordinates in the equations of motion are treated as fast variables, whereas the relative joint coordinates are treated as slow variables. In the multirate integration, the fast variables are integrated with small step-size, and the slow variables are integrated with larger step-size. The proposed multirate integration method is based on the Adams-Bashforth-Moulton predictor-corrector method and implemented in the Nordsieck vector form. The Nordsieck form of multrate integration method provides effective step-size control and at the same time, inherits the efficiency from the Adams integration method. Simulations of a flexible gun and turret system of the military tank have been carried out to show the effectiveness and efficiency of the proposed method.

• Proceedings of the Korean Society of Computational and Applied Mathematics Conference
• /
• 2003.09a
• /
• pp.16.2-16
• /
• 2003

미분 방정식의 수치적 해를 나타내는 방법 중 예측자-수정자 방법(predictor-corrector method)으로 알려진 Adams-Bashford-Moulton 방법은 다단계 방법을 이용하기 때문에 일단계 방법에 비하여 훨씬 좋은 수치적인 결과를 보여주고 있다. 이제, 이 다단계 방법에 오차제어 변수를 첨가한 새로운 형태의 예측자-수정자 방법을 제시하고 안정적인 해를 구할 수 있는 오차 제어 변수의 범위를 확인한다. 또한, 새로운 형태의 예측자-수정자 방법이 기존의 방법에 비하여 미분 방정식의 해에 대한 오차를 줄일 수 있는 방법임을 수치적인 결과를 통하여 검증한다.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1340-1346
• /
• 2020

The aim of this paper is to explore the 8th-order Adams-Bashforth-Moulton (ABM8) method in the solution of the point reactor kinetics equations. The numerical experiment considers feedback reactivity by Doppler effects, and insertions of reactivity. The Doppler effects is approximated with an adiabatic nuclear reactor that is a typical approximation. The numerical results were compared and discussed with several solution methods. The CATS method was used as a benchmark method. According with the numerical experiments results, the ABM8 method can be considered as one of the main solution method for changes reactivity relatively large.

• Publications of The Korean Astronomical Society
• /
• v.15 no.spc2
• /
• pp.65-71
• /
• 2000

We have investigated the numerical methods to calculate model atmosphere for the analysis of spectral lines emitted from the sun and stars. Basic equations used in our calculations are radiative transfer, statistical equilibrium and charge-particle conservations. Transfer equation has been solved to get emitting spectral line profile as an initial value problem using Adams-Bashforth-Moulton method with accuracy as high as 12th order. And we have calculated above non linear differential equations simultaneously as a boundary value problem by finite difference method of 3 points approximation through Feautrier elimination scheme. It is found that all computing programs coded by above numerical methods work successfully for our model atmosphere.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.1
• /
• pp.12-23
• /
• 1994

This paper proposes an optimal design software for the open-chain dynamic systems whose governing equations are expressed as differential equation. In this software, an input module and an automatic creation module of the equation of motion are developed to contrive the user's convenience. To analyze the equation of motion of the dynamic systems, variable-order and variable-stepsize Adams-Bashforth-Moulton predictor-corrector method is used to improve the efficiency. For the optimization and the design sensitivity analysis, ALM(augmented lagrange multiplier)method and adjoint variable method are adopted respectively. An output module with which the user can compare and investigate the analysis and the optimization results through tables and graphs is also provided. The developed software is applied to three typical dynamic response optimization problems, and the results compare very well with those available in the literature, demonstrating its effectiveness.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2240-2242
• /
• 2001

A rotary double inverted pendulum, the nonlinear system has a regulation problem. In this paper, we linearize the nonlinear system at the upright equilibrium position. The linearized system can be expressed in state space. To maintain the upright position, we design a feedback controller using LQR(Linear Quadratic Regulator) algorithm. Then we simulate the system with third-order Adams Bashforth Moulton Method. The simulated result shows that the applied algorithm is effective for the regulation problem.

• Ocean Systems Engineering
• /
• v.4 no.2
• /
• pp.83-97
• /
• 2014

Wave propagation in a three-dimensional (3D) fully nonlinear numerical wave tank (NWT) is studied based on velocity potential theory. The governing Laplace equation with fully nonlinear boundary conditions on the moving free surface is solved using the indirect desingularized boundary integral equation method (DBIEM). The fourth-order predictor-corrector Adams-Bashforth-Moulton scheme (ABM4) and mixed Eulerian-Lagrangian (MEL) method are used for the time-stepping integration of the free surface boundary conditions. A smoothing algorithm, B-spline, is applied to eliminate the possible saw-tooth instabilities. The artificial wave speed employed in MTF (multi-transmitting formula) approach is investigated for fully nonlinear wave problem. The numerical results from incorporating the damping zone (DZ), MTF and MTF coupled DZ (MTF+DZ) methods as radiation condition are compared with analytical solution. An effective MTF+DZ method is finally adopted to simulate the 3D linear wave, second-order wave and irregular wave propagation. It is shown that the MTF+DZ method can be used for simulating fully nonlinear wave propagation very efficiently.