• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.382-389
• /
• 2013

In anti-jamming GPS receiver, adaptive signal processing techniques in which the radiation pattern of adaptive array antenna of elements may be adaptively changed used to reject interference, clutter, and jamming signals. In this paper, I describes adaptive signal processing technique using the sample matrix inversion(SMI) algorithm. This adaptive signal processing technique can be applied effectively to wideband/narrowband anti-jamming GPS receiver because it does not consider the satellite signal directions and GPS signal power level exists below the thermal noise. I also analyzed the effects of covariance matrix sample size and diagonal loading technique on the system performance of five-element circular array antenna. To attain near optimum performance, more samples required for calculation covariance matrix. Diagonal loading technique reduces the system nulling capability against low-power jamming signals, but this technique improves robustness of adaptive array antenna.

• Structural Engineering and Mechanics
• /
• v.28 no.4
• /
• pp.461-477
• /
• 2008

An adaptive finite element method for analyzing two-dimensional and axisymmetric nonlinear elastic fracture mechanics problems with cracks is presented. The J-integral is used as a parameter to characterize the severity of stresses and deformation near crack tips. The domain integral technique, for which all relevant quantities are integrated over any arbitrary element areas around the crack tips, is utilized as the J-integral solution scheme with 9-node degenerated crack tip elements. The solution accuracy is further improved by incorporating an error estimation procedure onto a remeshing algorithm with a solution mapping scheme to resume the analysis at a particular load level after the adaptive remeshing technique has been applied. Several benchmark problems are analyzed to evaluate the efficiency of the combined domain integral technique and the adaptive finite element method.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.110-112
• /
• 2003

This paper presents an alleviant technique for solving ill-conditioned linear systems using spectral adaptive mapping, which is based on spectral mapping theorem. The conventional approaches to solve the ill-conditioned linear systems are divided into reformulation and alleviant technique. So far, the alleviant technique is evaluated the most effective one. In this paper, an adaptive mapping of spectrum is adopted to alleviate the condition number of ill-conditioned linear systems. A shift constant, which is a dominant factor of the spectral adaptive mapping that are proposed, is assessed by the system spectrum. The proposed spectral adaptive mapping technique is tested to demonstrated the validation on several size Hilbert matrices and small scale power systems, which are provide the promising results.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.32 no.4
• /
• pp.1-18
• /
• 2007

In this paper, we develop an adaptive genetic algorithm (aGA). The aGA has an adaptive scheme which can automatically determine the use of local search technique and adaptively regulate the rates of crossover and mutation operations during its search process. For the adaptive scheme, the ratio of degree of dispersion resulting from the various fitness values of the populations at continuous two generations is considered. For the local search technique, an improved iterative hill climbing method is used and incorporated into genetic algorithm (GA) loop. In order to demonstrate the efficiency of the aGA, i) a canonical GA without any adaptive scheme and ii) several conventional aGAs with various adaptive schemes are also presented. These algorithms, including the aGA, are tested and analyzed each other using various test problems. Numerical results by various measures of performance show that the proposed aGA outperforms the conventional algorithms.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.305-311
• /
• 2003

We propose a new technique of adaptive-neuro controller design to implement real-time control of robot manipulator, Unlike the well-established theory for the adaptive control of linear systems, there exists relatively little general theory for the adaptive control of nonlinear systems. Adaptive control technique is essential for providing a stable and robust performance for application of robot control. The proposed neuro control algorithm is one of loaming a model based error back-propagation scheme using Lyapunov stability analysis method. Through simulation, the proposed adaptive-neuro control scheme is proved to be a efficient control technique for real time control of robot system using DSPs(TMS320C50)

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.7
• /
• pp.70-82
• /
• 1993

In this paper, employing the 3-dimensional discrete cosine transform (DCT) for the utilization of the temporal correlation, an adaptive motion sequence coding technique is proposed. The energy distribution in a 3-D DCT block, due to the nonstationary nature of the image data, varies along the veritical, horizontal and temporal directions. Thus, aiming an adaptive system to local variations, adaptive procedures, such as the 3-D classification, the classified linear scanning technique and the VLC table selection scheme, have been implemented in our approach. Also, a hybrid structure which adaptively combines inter-frame coding is presented, and it is found that the adaptive hybrid frame coding technique shows a significant performance gain for a moving sequence which contains a relatively small moving area. Through an intensive computer simulation, it is demonstrated that, the performance of the proposed 3-D transform coding technique shows a close relation with the temporal variation of the sequence to be code. And the proposed technique has the advantages of skipping the computationally complex motion compensation procedure and improving the performance over the 2-D motion compensated transform coding technique for rates in the range of 0.5 ~ 1.0 bpp.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.224-227
• /
• 2001

Adaptive analysis of multilayered composite and sandwich plates is carried out. The adaptive analysis is based on a finite element error form, which measures the difference between the through-the-thickness distribution of finite element displacement and the actual displacement. The region where the error-measure exceeds the prescribed admitted error value, the finite element mesh locally refined in the thickness direction using the mesh superposition technique. Several numerical tests are conducted to validate the effectiveness of the current approach for adaptive analysis of laminated plates.

• Structural Engineering and Mechanics
• /
• v.12 no.5
• /
• pp.475-490
• /
• 2001

Remeshing strategies are formulated for r-adaptive and h/r-adaptive analysis of crack propagation. The relocation of the nodes, which typifies r-adaptivity, is a very cheap method to optimise a given discretisation since the element connectivity remains unaltered. However, the applicability is limited. To further improve the finite element mesh, a combined h/r-adaptive method is proposed in which h-adaptivity is applied whenever r-adaptivity is not capable of further improving the discretisation. Two and three-dimensional examples are presented. It is shown that the r-adaptive approach can optimise a discretisation at minimal computational costs. Further, the combined h/r-adaptive approach improves the performance of a fully r-adaptive technique while the number of h-remeshings is reduced compared to a fully h-adaptive technique.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.8
• /
• pp.1332-1338
• /
• 1997

In the case of the transfer function for the secondary path is dependent on time, the on-line method which can model it is continuously must be applied to the active noise control technique. And the adaptive random noise technique among the on-line methods is effective in the narrow-band control. In this method, the signal to noise ratio between random noise for modeling and primary noise is low. Therefore, the estimations of transfer function will be prone to inaccuracies and the convergence time will be too long. Such imperfections will have an influence upon the performance of an active noise controller. In this study, t enhance the signal to noise ratio, the on-line method that is combined the conventional adaptive random noise technique and the adaptive line enhancer, is proposed. By using proposed on-line method, a rigorous system identification and control of primary noise have been implemented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.823-829
• /
• 2003

For high frequency microstrip line modelling, a fast inductance extraction technique using an adaptive PEEC(partial element equivalent circuit) grid is proposed. The grid refinement technique is based on the current distribution depend on the excitation frequencies and the geometry of the microstrip lines. The adaptive ids are refined mainly in the area where heavy currents reside. This technique is applied to the inductance extraction of the microstrip lines. The results show fast convergence, and this adaptive technique is efficient to reduce computing time and the number of grids.