• Journal of Radiation Industry
• /
• v.5 no.3
• /
• pp.197-202
• /
• 2011

In this study, an Ag-polyaniline-silica (Ag-PANI-silica) nanoparticle was evaluated as a radioisotope carrier. An Ag-PANI-silica nanoparticle was incubated in the $^{125}I$ solution for a duration of 24 hr to test its radioisotope absorptivity. During the incubation, radioactivity of the nanoparticle was measured at 3, 6, 12, and 24 hr. After a 24 hr incubation, $^{125}I$-Ag-PANI-silica nanoparticle was incubated in a fresh saline for a duration of 48 hr to check its stability. Additionally, the $^{125}I$-Ag-PANI-silica nanoparticle was injected to the ICR mouse to investigate its in-vivo distribution characteristics. The $^{125}I$ absorption yield of the Ag-PANI-silica nanoparticle was higher than 95% after a 6 hr incubation period in the $^{125}I$ solution. And $^{125}I$-Ag-PANI-silica was stable for 48 hr at 80% yield at room temperature. The SPECT/CT image of a mouse that received $^{125}I$-Ag-PANI-silica complex showed that the $^{125}I$-Ag-PANI-silica complex was distributed in the lung, stomach and thyroid at 30 min post injection. From these results, the Ag-PANI-silica nanoparticle has good radio-iodine carrying property and can be applicable for the purpose of diagnosis and therapy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.595-595
• /
• 2013

본 연구에서는 brush painting공법을 이용하여 인쇄형 유기태양전지에 적용이 가능한 ITO nanoparticle/Ag nanowire/ITO nanoparticle (Nano IAI) 다층 하이브리드 투명 전극의 전기적, 광학적, 구조적 특성을 연구하였다. 평균 25 nm 사이즈의 ITO 나노 입자로 구성된 ITO 나노 잉크와 직경 20~25 nm의 Ag nanowire 잉크를 기반으로 Brush painting 기술을 적용해 상온, 상압에서 낮은 면저항과 높은 투과도를 가지는 Nano IAI 하이브리드 투명 전극을 제작하였다. Nano IAI 투명 전극 제작 시 일정한 두께에서 Ag nanowire 코팅을 위한 brush painting 횟수를 변수로 하여 최적화 공정을 진행하였으며, Ag nanowire가 2번 brush painting 된 Nano IAI 다층 하이브리드 투명전극은 $3.4{\times}10^{-3}$ ohm-cm의 비저항과 52.33 ohm/square의 낮은 면저항을 나타내었다. 이를 통해 효과적으로Ag nanowire를 ITO nanoparticle 사이에 삽입할 경우, 고온의 열처리 공정을 통하지 않고 낮은 면저항을 가지는 인쇄형 투명 전극을 구현할 수 있음을 확인할 수 있었다. 특히 Nano IAI 다층 하이브리드 전극은 83.83%의 높은 투과도를 나타내는데 이는 삽입된 Ag Nanowire의 폭과 길이가 나노 사이즈이기 때문에 입사되는 빛이 흡수되기보다 대부분 투과하기 때문으로 사료된다. 또한, XRD 분석과 HRTEM 분석을 통해 Nano IAI 다층 하이브리드 투명전극의 전도 메커니즘을 설명하였다. 이와 같은 우수한 전기적, 광학적 특성은 brush painting 기법으로 제작된 Nano IAI 다층 하이브리드 투명 전극의 인쇄형 유기태양전지 적용 가능성을 나타낸다.

• Journal of Powder Materials
• /
• v.15 no.2
• /
• pp.114-118
• /
• 2008

Functional nanomaterial is expected to have improved capacities on various fields. Especially, metal nanoparticles dispersed in polymer matrix and metal nanofiber, one of the functional nanomaterials, are able to achieve improvement of property in the electric and other related fields. In this study, the fabrication of metal (Ag) nanoparticle dispersed nanofibers were attempted. The Ag nanoparticle dispersed polymer nanofiber and Ag nanofiber were fabricated by electrospinning method using electric force. First, PVP/$AgNO_3$ nanofibers were synthesized by electrospinning in $18{\sim}22kV$ voltage with the starting materials (Ag-nitrate) added polymer (PVP; poly (vinylpyrrolidone)). Then Ag nanoparticle dispersed polymer nanofibers were fabricated to reduce hydrogen reduction at $150^{\circ}C$ for 3hr. And Ag nanofibers were synthesized by the decomposited of PVP at $300{\sim}500^{\circ}C$ for 3hr. The nanofibers were analyzed by XRD, TGA, FE-SEM and TEM. The experimental results showed that the Ag nanofibers could be applied in many fields as an advanced material.

• Membrane Journal
• /
• v.28 no.4
• /
• pp.260-264
• /
• 2018

Poly (ethylene oxide) (PEO)/Ag nanoparticles (AgNPs)(precursor : $AgBF_4$)/p-benzoquinone (p-BQ) composite membrane was prepared for olefin/paraffin separation. As a result, the performance of composite membrane was observed to be maintained at selectivity of 10 and permeance of 15 GPU up to 100 hours. The performance of the membrane was maintained for 100 hours was attributable to that Ag ions could be converted into stable Ag NPs by addition of p-BQ. Furthermore, the surface was partially polarized by the electron acceptor p-BQ, resulting in the formation of olefin carrier. In this study, since the cost of $AgBF_4$ used as a precursor of Ag NPs was relatively higher, $AgNO_3$ was utilized. As a result, it was confirmed that $AgNO_3$ couldn't show the stable formation of nanoparticle, resulting in the poor separation performance.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.410-415
• /
• 2018

Expanded graphite (EG)/Ag nanoparticle composites were synthesized by the chemical reduction of Ag ions, followed by the addition of expanded graphite into an Ag reducing solution. The prepared composites showed uniform dispersion of Ag nanoparticles on the surface of expanded graphite and exhibited relatively higher thermal conductivities than those of pure expanded graphite. In the case of 10% Ag content in the composite, the thermal conductivity in the thickness direction was 78% higher than the pure expanded graphite. We suggest that EG/Ag nanoparticle composites are a strong candidate for advanced heat spreading material.

• Membrane Journal
• /
• v.29 no.5
• /
• pp.246-251
• /
• 2019

Facilitated transport membranes using silver nanoparticles as carriers for olefin/paraffin separation have been interested. $AgBF_4$ has been used as a precursor of silver nanoparticles in previous studies. However, relatively expensive $AgBF_4$ is not suitable for commercialization, and thus, PEBAX-5513/AgNPs (precursor: $AgClO_4$)/7,7,8,8-tetracyanoquinodimethane (TCNQ) composite membranes were prepared using silver nanopaticles with relatively inexpensive $AgClO_4$ precursors. Composite membranes of various compositions were prepared for PEBAX-5513/AgNPs/TCNQ composites, but no separation performance was observed. As a result of FT-IR analysis, it was confirmed that silver nanoparticles were formed in the PEBAX-5513 polymer and the surface of Ag nanoparticles was polarized by TCNQ, but the formed silver nanoparticles were not stabilized. From these results, it was concluded that the anion of the precursor plays an important role in the olefin/paraffin separation.

• Journal of the Korean Chemical Society
• /
• v.63 no.4
• /
• pp.307-311
• /
• 2019

• Journal of the Korean Chemical Society
• /
• v.65 no.5
• /
• pp.401-405
• /
• 2021

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.426-429
• /
• 2017

In this study, we investigated the effect of BN (boron nitride) on the thermal and the electrical conductivity of composites. In case of epoxy/BN composites, the thermal conductivity was increased as the BN contents were increased. Epoxy/AgNP (Ag nanoparticle) nanocomposites exhibited a slight change of thermal conductivity and showed a electrical percolation threshold at 20 vol% of Ag nanoparticles. At the fixed Ag nanoparticle content below the electrical percolation threshold, increasing the amount of BN enhanced the electrical conductivity as well as thermal conductivity for the epoxy/AgNP/BN composites.

• Journal of Radiation Industry
• /
• v.4 no.4
• /
• pp.353-357
• /
• 2010

Silver nanoparticles (AgNPs) can be used in the areas such as integrate circuit, cell electrode and antimicrobial deodorant. In this study, AgNPs have been prepared by using $AgNO_3$ aqueous solution in the carboxymethyl cellulose (CMC) hydrogel. CMC powders were dissolved in deionized water, and then irradiated by a gamma-ray with a radiation dose of 50 kGy to make CMC hydrogel. CMC hydrogels were dipped into $1.0{\times}10^{-2}M$ $AgNO_3$ solution for 1 hour. After that, the swollen hydrogels were irradiated by gamma-ray for the formation of AgNPs. The characteristics of silver nanoparticles in the CMC hydrogels were monitored by UV-Vis and the morphological study and dispersed coefficient of particles were investigated by FE-SEM/EDX. It was observed that the sodium salt in the CMC is crucial to the formation of silver nanoparticle. Finally, antibacterial tests indiacted that the hydrogel containing silver nanoparticle has antibacterial activity.