• 제목/요약/키워드: Agricultural aviation

검색결과 13건 처리시간 0.022초

The Role and Possibilities of the Agricultural Aviation in Helping Developing Countries

  • Rowiski, Robert-Stefan
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
    • /
    • pp.205-211
    • /
    • 1996
  • A problem of the World population and a food deficiency in the World is briefly presented. On this background the role and possibilities of agricultural aviation especially for developing countries is analized . In conclusion, is suggested to establish of World Aviation Help Service (WAHS) under UN auspices.

  • PDF

소형 무인헬기를 이용한 항공방제기술 (I) - 현황 및 경제성 분석 - (Aerial Application using a Small RF Controlled Helicopter (I) - Status and Cost Analysis -)

  • 구영모;이채식;석태수;신시균;강태경;김승희;최태영
    • Journal of Biosystems Engineering
    • /
    • 제31권2호
    • /
    • pp.95-101
    • /
    • 2006
  • Present chemical application system using a power sprayer has been a labor intensive, ineffective and shirking task in farming. Therefore, a small RF controlled (unmanned) helicopter was suggested to replace the conventional spray system. The aerial application using the unmanned helicopter has been already utilized in Japan, where total area applied up to 704,000 ha in 2005. In this article, the status and cost analysis on the unmanned agricultural helicopter were studied. The aerial application using the agricultural helicopter helps precise and timely spraying and reduces labor intensity and pollution. The field capacity of the helicopter was found to be 60-70 ha a day. The break even point was estimated near the operating area of 750 ha annum. The development of an agricultural helicopter was necessary for taking advantages of both technique and economy.

An Efficient Complex Event Processing Algorithm based on Multipattern Sharing for Massive Manufacturing Event Streams

  • Wang, Jianhua;Lan, Yubin;Lu, Shilei;Cheng, Lianglun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제13권3호
    • /
    • pp.1385-1402
    • /
    • 2019
  • Quickly picking up some valuable information from massive manufacturing event stream usually faces with the problem of long detection time, high memory consumption and low detection efficiency due to its stream characteristics of large volume, high velocity, many variety and small value. Aiming to solve the problem above for the current complex event processing methods because of not sharing detection during the detecting process for massive manufacturing event streams, an efficient complex event processing method based on multipattern sharing is presented in this paper. The achievement of this paper lies that a multipattern sharing technology is successfully used to realize the quick detection of complex event for massive manufacturing event streams. Specially, in our scheme, we firstly use pattern sharing technology to merge all the same prefix, suffix, or subpattern that existed in single pattern complex event detection models into a multiple pattern complex event detection model, then we use the new detection model to realize the quick detection for complex events from massive manufacturing event streams, as a result, our scheme can effectively solve the problems above by reducing lots of redundant building, storing, searching and calculating operations with pattern sharing technology. At the end of this paper, we use some simulation experiments to prove that our proposed multiple pattern processing scheme outperforms some general processing methods in current as a whole.

소형 트랙터용 전자제어 직접 분사식 디젤 엔진 고강도 실린더 블록의 설계에 관한 연구 (A Study on Design of High strength Cylinder Block about Common Rail Direct Injection Diesel Engine for Small Tractor)

  • 남석주;박성호;김규태;김귀남
    • 한국산업융합학회 논문집
    • /
    • 제26권4_2호
    • /
    • pp.649-656
    • /
    • 2023
  • Recently, global warming has become severe, and regulation is established for carbon savings each field. its regulation is applied to various fields using IC engine such as automobile, ship, agricultural machine. Therefore engine block applied Common Rail Direct Injection(CRDI) technology, that carry out thermal-structure analysis to examine design. The thermal load about 900℃ by explosion was applied in cylinder. And pressure about 9 MPa(90 Bar) was applied to structure analysis. As a result, it was the highest at 185.99℃ at the top of cylinder. Static-structure analysis applied thermal load, that was shown maximum equivalent stress at 142.59 Mpa and Maximum principal stress 145.03 MPa, Minimum principal stress -149 MPa. When compare analysis results to material property, it design is safety structurally.

An Efficient Complex Event Detection Algorithm based on NFA_HTS for Massive RFID Event Stream

  • Wang, Jianhua;Liu, Jun;Lan, Yubin;Cheng, Lianglun
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권2호
    • /
    • pp.989-997
    • /
    • 2018
  • Massive event stream brings us great challenges in its volume, velocity, variety, value and veracity. Picking up some valuable information from it often faces with long detection time, high memory consumption and low detection efficiency. Aiming to solve the problems above, an efficient complex event detection method based on NFA_HTS (Nondeterministic Finite Automaton_Hash Table Structure) is proposed in this paper. The achievement of this paper lies that we successfully use NFA_HTS to realize the detection of complex event from massive RFID event stream. Specially, in our scheme, after using NFA to capture the related RFID primitive events, we use HTS to store and process the large matched results, as a result, our scheme can effectively solve the problems above existed in current methods by reducing lots of search, storage and computation operations on the basis of taking advantage of the quick classification and storage technologies of hash table structure. The simulation results show that our proposed NFA_HTS scheme in this paper outperforms some general processing methods in reducing detection time, lowering memory consumption and improving event throughput.

농업관측을 위한 다중분광 무인기 반사율 변동성 분석 (Analysis of UAV-based Multispectral Reflectance Variability for Agriculture Monitoring)

  • 안호용;나상일;박찬원;홍석영;소규호;이경도
    • 대한원격탐사학회지
    • /
    • 제36권6_1호
    • /
    • pp.1379-1391
    • /
    • 2020
  • 농업에서의 무인기는 촬영 영역은 작지만, 위성이 가지지 못하는 초고해상도의 영상 수집이 가능하며, 작물의 생물계절에 맞는 영상을 적시에 획득 할 수 있어 들녘단위 농경지의 모니터링에 유용하게 사용될 수 있다. 하지만 무인기의 경우 위성과 달리 다양한 카메라와 촬영 환경에 따른 다중시기 영상을 활용하기 때문에 시계열 영상 활용을 위해서는 정규화 된 영상자료를 활용하는 것이 필수적으로 요구된다. 본 연구는 무인기 다중분광 영상의 농업 모니터링 시계열 활용을 위해 촬영 환경에 따른 무인기 반사율 및 식생지수의 변동성을 분석하였다. 촬영 고도, 촬영 방향, 촬영시간, 운량과 같은 환경요인에 따른 반사율 변동성은 8%에서 11%로 매우 크게 나타났으나, 식생지수의 변동성은 1% ~ 5%로 안정적인 것을 확인 할 수 있었다. 이러한 현상은 무인기 다중분광센서의 특성과 후처리 프로그램의 정규화 등 다양한 원인이 존재하는 것으로 판단된다. 따라서 무인기 영상의 시계열 활용을 위해서는 식생지수와 같은 밴드비율함수를 활용하는 것이 권장되며 촬영 시 가능한 동일한 촬영시간, 촬영 고도, 촬영 방향을 설정하여 시계열 영상의 변동성을 최소화하는 것이 권장된다.

딥러닝을 이용한 농경지 팜맵 판독 적용 방안 (The Application Methods of FarmMap Reading in Agricultural Land Using Deep Learning)

  • 위성승;정남수;이원석;신용태
    • 정보처리학회논문지:소프트웨어 및 데이터공학
    • /
    • 제12권2호
    • /
    • pp.77-82
    • /
    • 2023
  • 본 논문은 농림축산식품부에서 구축한 농경지 전자지도인 팜맵을 딥러닝을 이용하여 농경지 속성정보인 논, 밭, 인삼, 과수, 시설, 비경지의 속성 정보를 판독하는 방안을 제안한다. 팜맵은 항공 및 위성 영상을 이용하여 현실 세계의 농경지를 디지털화하여 작물 생산 현황 파악과 드론 운영에 공간정보로 활용되고 있으며, 판독 매뉴얼을 작성하여 매년 사람을 통해 농경지의 경계를 구획하고 속성을 판독하여 갱신한다. 사람을 통한 농경지 속성판독은 사람의 판독 역량과 경험에 따라 차이를 보이며, 판독 오류는 예산과 공간적 시간적 한계로 직접 현장에 갈 수 없어 현실적으로 검증이 쉽지 않다. 팜맵은 5가지의 농경지 속성의 이미지에 해당 객체의 위치 정보와 클래스 정보를 가지고 있어 적합한 AI의 기법은 인스턴스 분할 모델인 ResNet50으로 실험을 진행하였으며, 딥러닝을 이용한 농경지 속성판독과 사람에 의한 속성판독 결과를 비교하여, 향후 다른 결과를 나타내는 속성판독에 집중하여 기술을 개발한다면 속성 오류를 줄이고 농경지 전자지도의 정확성 향상에 큰 역할을 할 것으로 기대된다.

중국 도·농 간 소득격차에 영향을 미치는 요인 (Factors Effect on Income-Gap Between Urban and Rural Area in China)

  • 남설봉;나승화
    • 한국프랜차이즈경영연구
    • /
    • 제6권1호
    • /
    • pp.21-41
    • /
    • 2015
  • The purpose of the study is to review the real situations of the income-gap between urban and rural areas which is focused on as one of the biggest issues revealed in the process of Chinese economic development and to find out which factors will alleviate or deteriorate such income-gap, also to find out such factors will effect differently on the regional characteristics. To analyze it, six factors such as industrialization-ratio, urbanization-ratio, tertiary industry-ratio, the level of both governmental educational support and agricultural support, and Chinese dual-economic structure are considered as explanatory variables, and OLS regression analysis was implemented to the factor data for the period of 1986-2007 about Chinese 31 districts(castles and cities). The results of the analysis show that both industrialization factors and urbanization factors affect significantly to alleviate income-gap between urban and rural areas, and as predicted, they also shows that dual-economic structure between urban and rural areas is the most biggest factors to enlarge the above mentioned income-gap. However, in accordance to the different level of economic development in eastern, central, and western districts the study shows that such factors will affect them differently respectively. The contents are as follows; In eastern district governmental educational support factor will affect the most great influence to alleviate the income-gap, in central district industrialization factor will affect the most great influence to alleviate the gap, and western district governmental agricultural support factor will affect the most great influence to alleviate the gap. Therefore, in solving the issue of income-gap between urban and rural areas in China we recommend that it is necessary for more differential policy in considering regional characteristics than unilateral policy to Chinese whole areas.

농약살포용 드론을 이용한 배추 주요해충 3종의 방제기준 설정 (Control Standards of Three Major Insect Pests of Chinese Cabbage (Brassica campestris) Using Drones for Pesticide Application)

  • 최덕수;마경철;김효정;이진희;오상아;김선곤
    • 한국응용곤충학회지
    • /
    • 제57권4호
    • /
    • pp.347-354
    • /
    • 2018
  • 드론을 이용한 배추 해충 방제기준을 설정하기 위하여, 드론의 살포높이(3, 4, 5 m), 진행속도(3, 4 m/sec) 에 따른 하향풍 속도, 살포 폭, 그리고 낙하 입자수와 입자크기를 감수지를 이용하여 조사하였고, 항공방제용 농약 4종을 이용하여 배추 주요해충인 배추좀나방, 파밤나방, 담배거세미나방에 대하여 완전치사농도와 약량을 실험실에서 검정하였다. 드론의 농약 살포시 면별 낙하입자비율은 표면 80.5, 수직면 14.8, 밑면 4.7%였고, 살포높이에 따른 낙하입자수는 3 m = 53, 4 m = 40, 5 m = 39개/$cm^2$였다. 비행속도별 낙하입자수는 3 m/sec = 62, 4 m/sec = 25개/$cm^2$였다. 실내시험에서 배추좀나방의 완전치사농도와 치사량이 클로르페나피르액상수화제(20배, $0.5{\mu}l$) 비스트리플루론 클로르페나피르 액상수화제(25배, $0.5{\mu}l$)였다. 파밤나방에 대하여는 클로르페나피르액상수화제(20배, $1{\mu}l$), 비스트리플루론 클로르페나피르액상수화제(20배, $1{\mu}l$)였고, 담배거세미나방에 대하여는 클로르페나피르액상수화제(20배, $1{\mu}l$), 비스트리플루론 클로르페나피르액상수화제(20배, $0.5{\mu}l$)였다. 따라서 드론을 이용하여 배추 주요해충을 방제하는 방법으로 클로르페나피르액상수화제 또는 비스트리플루론 크로르페나피르액상수화제를 20배액으로 희석하여 3 m 높이에서 3 m/sec 속도로 살포하면 72개/$cm^2$의 농약입자가 낙하하므로 해충방제에 효과적일 것으로 판단된다.