• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.677-680
• /
• 2008

AiPi technology incorporates an embedded clock and control scheme with a point-to-point bus topology, achieving the smallest possible number of interface lines between a timing controller and source drivers. A 46" AiPi-based 10-bit FHD prototype requires only 20 interface lines, compared to 38 lines for mini-LVDS. The measured maximum data rate per one data pair is more than 800Mbps.

• Journal of Information Display
• /
• v.10 no.1
• /
• pp.37-44
• /
• 2009

AiPi technology incorporates an embedded clock and control scheme with a point-to-point bus topology, thereby having the smallest possible number of interface lines between a timing controller and column drivers. A point-to-point architecture boosts the data rate and reduces the number of interface lines, because impedance matching can be easily achieved. An embedded clock and control scheme is implemented by means of multi-level signalling, which results in a simple clock/data recovery circuitry. A 46" AiPi-based 10-bit FHD prototype requires only 20 interface lines, compared to 38 lines for mini-LVDS. The measured maximum data rate per data pair is more than 800 Mbps.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.4
• /
• pp.39-50
• /
• 2011

In this paper, we presents a CDR circuit for $2^{nd}$-generation AiPi+, one of the Intra-panel Interface. The speed of the proposed clock and data recovery is increased to 1.25 Gbps compared with that of AiPi+. The DLL-based CDR architecture is used to generate the multi-phase clocks. We propose the simple scheme for frequency detector (FD) to mitigate the harmonic-locking and reduce the complexity. In addition, the duty cycle corrector that limits the maximum pulse width is used to avoid the problem of missing clock edges due to the mismatch between rising and falling time of VCDL's delay cells. The proposed CDR is implemented in 0.18 um technology with the supply voltage of 1.8 V. The active die area is $660\;{\mu}m\;{\times}\;250\;{\mu}m$, and supply voltage is 1.8 V. Peak-to-Peak jitter is less than 15 ps and the power consumption of the CDR except input buffer, equalizer, and de-serializer is 5.94 mW.

• Journal of Intelligence and Information Systems
• /
• v.15 no.4
• /
• pp.53-64
• /
• 2009

This paper presents a performance evaluation of shape descriptors for gait analysis in case of silhouette sequence images. We used moment descriptors(MD), Fourier descriptors(FD) and Zernike descriptors(ZD) as a shape descriptor. To evaluate their performance, we firstly defined the performance index, that is, AI(asymmetry index) and PI(periodic index) based on the periodic property of the gait images. This is why they are represented by periodic parameters due to periodic gait images. This index means that how the shape is represented periodically. According to these indexes, we evaluated the data sets with periodic images, downloaded from internet. The results showed that Zernike descriptors had better performance of AI = 1.09 and PI = 2.21 than others. And in case of FD and ZD, it's efficient to implement the gait analysis with 5~10 parameters.

• Journal of the Korean Chemical Society
• /
• v.45 no.2
• /
• pp.156-161
• /
• 2001

Various oxidation states of Polyaniline(PANI) were chemically synthesized, and characterized by FT-IR, UV-Vis, GPC, TG-DTA, Single layer light emitting diodes(LED) were perpared by spin coating of LEB-PANI solutions which have various oxidation states onto an ITO substrate and subsequent vacuum deposition of aluminum top electrode and then current-voltage characteristics. EL spectrum was investigated It was found that ${\pi}$-${\pi}$* transition were shifled to longer wavelength and molecular excition transition were decreased in the UV-Vis spectra and the intensity of EL and PL were increased as the contents of fully reduced form LEB increased. The turn-on voltage of ITO/LEB/AI structured LED was 5 V. It was found that the white light was emitted only from the phase with reduced epeat unit.

• Smart Media Journal
• /
• v.10 no.1
• /
• pp.55-62
• /
• 2021

We applied machine learning of semi-supervised learning, transfer learning, and federated learning as examples of AI use cases that can be applied to the three major industries(Automobile industry, Energy industry, and AI/Healthcare industry) of Gwangju Metro-city, and established an ML strategy for AI services for the major industries. Based on the ML strategy of AI service, practical approaches are suggested, the semi-supervised learning approach is used for automobile image recognition technology, and the transfer learning approach is used for diabetic retinopathy detection in the healthcare field. Finally, the case of the federated learning approach is to be used to predict electricity demand. These approaches were tested based on hardware such as single board computer Raspberry Pi, Jaetson Nano, and Intel i-7, and the validity of practical approaches was verified.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.370-372
• /
• 2021

According to the Clinical Research Center for Dementia, 840,000 Koreans aged 65 or older had dementia patients, with a prevalence rate of 10.39%. The prevalence rate is one in 10 elderly people, but difficult for families to take care of them all day. Judged that possible to manage the conditions and schedules of elderly people living alone by utilizing AI speaker system where schedule management is stored. This paper implements modules for AI schedulers in patients with dementia. Configured to link AWS, a remote IOT, inside the raspberry pi, and to output the schedule to speakers using a calendar from Google API. Through this study, judged that ease of scheduling will help manage and schedule dementia patients.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.01a
• /
• pp.289-290
• /
• 2022

본 논문에서는 약을 제 시간에 복용할 수 있도록 도와주는 스마트 약통 서비스를 개발한 결과를 보인다. 라즈베리파이, 자석감지센서, LED, AI스피커와 외부서버를 결합한 구조로 개발하였으며, 사용자는 약을 복용하였는지에 따라 AI스피커를 통해서 약 복용 여부를 물어볼 수 있고 LED를 통해서 아침, 점심, 저녁의 시간에 따라 복용해야 하는 약을 표시해 줄 수 있도록 하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.237-239
• /
• 2021

본 논문에서는 YOLO 시스템을 사용하여 보조 보행 기구를 인식 한 후 자동문 속도 조절에 대한 방법을 제안한다. Visual studio, OpenCV, CUDA를 활용하여 보조 보행 기구를 인식이 가능하게 신경망 훈련 및 학습 한 데이터를 기반으로 Raspberry Pi, 카메라 모듈을 활용하여 실시간 모니터링을 통해 보조 보행 기구를 인식하여 자동문의 속도를 조절을 구현했다. 이로써 거동이 불편한 장애인은 원활하게 건물 출입이 가능하다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.407-408
• /
• 2022

본 논문에서는 AIoT를 위한 비주얼 블록 코딩 도구를 설계하였다. AI 블록 코딩이 가능한 EduB 플랫폼에 피지컬 컴퓨팅을 가능하게 하는 모듈을 추가함으로써 블록을 사용한 쉬운 피지컬컴퓨팅 코딩과 AIoT 코딩이 가능하다. 도구는 WebSocket과 Wifi를 사용해 EduB와 타겟보드인 RaspberryPi의 무선 통신을 하며, 블록으로 생성된 코드를 RaspberryPi 내부에서 실행하여 GPIO와 SenseHAT을 제어할 수 있게 하였다. 따라서, 코딩 결과를 콘솔 출력이나 그래프로만 확인할 수 있어 정적이던 AI 교육을 LED나 모터를 제어해 동적으로 결과를 확인할 수 있게 하여 흥미와 관심을 유발할 수 있도록 한다.