• 제목/요약/키워드: Alkaline impurity

검색결과 8건 처리시간 0.022초

The Influence of Alkaline Impurity K Content on Bubbles of Quartz Glass

  • Yeom, Ho Jong;Im, Hangjoon;Lee, Joo Ho;Song, Jun Baek;Kim, Yeong Joo
    • 한국세라믹학회지
    • /
    • 제54권4호
    • /
    • pp.298-302
    • /
    • 2017
  • To investigate the influence of alkaline impurity K content on bubbles of quartz glass, samples were prepared based on $SiO_2$ sand with differing amounts of potassium hydroxide solution added by electric fusion. Bubble properties such as number, diameter and bubble fraction were determined using a stereoscopic microscope. The results of the observations indicated that an alkaline impurity content of 100 ppm had a good effect on bubble decline in quartz glass. The effect on OH was investigated by FTIR(Fourier transform infrared spectroscopy).

입체화학을 이용한 생분해성 고분자의 분해속도에 관한 연구 (Study on Degradation Rates of Biodegradable Polymers by Stereochemistry)

  • 박찬영;최용해;이원기
    • 한국환경과학회지
    • /
    • 제18권7호
    • /
    • pp.797-802
    • /
    • 2009
  • To control degradation rate of biodegradable poly(lactide)s (PLA), the stereochemical PLAs with different ratios of d-lactide and l-lactide units were synthesized by the ring open polymerization and the their degradation kinetics were measured by a Langmuir film balance. The alkaline (pH=11) degradation of poly(l-lactide) (l-PLA) monolayer showed the faster rate at a surface pressure of 4 mN/m in the ranges from to 0 to 7 mN/m. However, the enzymatic degradation of l-PLA with Proteinase K did not occur until 4 mN/m. Above a constant surface pressure of 4 mN/m, the degradation rate was increased with a constant surface pressure. These behaviors might be attributed to the difference in the contacted area with degradation medium: alkaline ions need small contact area with l-PLA while enzymes require much bigger one to be activated due to different medium sizes. The stereochmical PLA monolayers showed that the alkaline degradation was increased with their optical impurities while the enzymatic one was inversed. These results could be explained by the decrease of crystallinity with the optical impurity and the inactivity of enzyme to d-LA unit.

Application of nanofiltration membrane in the recovery of aluminum from alkaline sludge solutions

  • Cheng, Wen Po;Chi, Fung Hwa;Yu, Ruey Fang;Tian, Dun Ren
    • Advances in environmental research
    • /
    • 제5권2호
    • /
    • pp.141-151
    • /
    • 2016
  • Large amounts of aluminum hydroxide ($Al(OH)_3$) exist in water purification sludge (WPS) because of the added aluminum coagulant in water treatment process. Notably, $Al(OH)_3$ is an amphoteric compound, can be dissolved in its basic condition using sodium hydroxide to form aluminate ions ($Al(OH)_4{^-}$). However, in a process in which pH is increasing, the humid acid can be dissolved easily from WPS and will inhibit the recovery and reuse of the dissolved aluminate ions. This study attempts to fix this problem by a novel approach to separate $Al(OH)_4{^-}$ ions using nanofiltration (NF) technology. Sludge impurity in a alkaline solution is retained by the NF membrane, such that the process recovers $Al(OH)_4{^-}$ ions, and significantly decreases the organic matter or heavy metal impurities in the permeate solution. The $Al(OH)_4{^-}$ ion is an alkaline substance. Experimental results confirm that a recovered coagulant of $Al(OH)_4{^-}$ ion can effectively remove kaolin particles from slightly acidic synthetic raw water.

전해채취에 의한 Gallium의 정제기술 (Method for Making High Purity Gallium by Electrowinning)

  • 최영종;황수현;전덕일;한규성
    • 자원리싸이클링
    • /
    • 제23권6호
    • /
    • pp.63-67
    • /
    • 2014
  • 갈륨은 주로 산화물 반도체용 타겟이나 LED 칩을 만드는 중요한 소재로 사용하고 있는데 아직까지 폐기물로부터 재자원화에 의한 순환량이 매우 낮다. 이로 인해 갈륨을 함유하고 있는 대부분의 폐자원은 해외로 유출되고 원재료는 수입에 의존하고 있다. 따라서 희유금속인 갈륨을 함유하고 있는 저품위 갈륨으로부터 갈륨을 회수하여 고순도화하는 방법을 연구 하였다. 전처리 과정으로 스크랩을 미분쇄하여 산으로 침출하였다. 침출액내 인듐은 치환으로 석출시켜 분리한 후 알칼리를 사용하여 갈륨과 아연을 수산화물로 침전시켜 여과 분리하였다. 갈륨과 아연수산화물을 알칼리용액으로 침출시켜 전해액을 제조하였고 전해채취로 갈륨과 아연메탈을 회수하였다. 갈륨과 아연은 진공정제를 통하여 아연을 제거하고 고순도의 갈륨을 회수하였다.

Au/Au-Sn 이종접합 적용 레이저 패키징을 통한 Vapor Cell 신뢰성 연구 (Study on Reliability of Vapor Cell by Laser Packaging with Au/Au-Sn Heterojunction)

  • 권진구;전용민;김지영;이은별;이성의
    • 한국전기전자재료학회논문지
    • /
    • 제33권5호
    • /
    • pp.367-372
    • /
    • 2020
  • As packaging processes for atomic gyroscope vapor cells, the glass tube tip-off process, anodic bonding, and paste sealing have been widely studied. However, there are stability issues in the alkali metal which are caused by impurity elements and leakage during high-temperature processes. In this study, we investigated the applicability of a vapor cell low-temperature packaging process by depositing Au on a Pyrex cell in addition to forming an Au-Sn thin film on a cap to cover the cell, followed by laser irradiation of the Au/Au-Sn interface. The mechanism of the thin film bonding was evaluated by XRD, while the packaging reliability of an Ne gas-filled vapor cell was characterized by variation of plasma discharge behavior with time. Furthermore, we confirmed that the Rb alkaline metal inside the vapor cell showed no color change, indicating no oxidation occurred during the process.

양자교환막을 이용하여 생산된 수소의 불순물 분석 (Hydrogen Impurities Analysis From Proton Exchange Membrane Hydrogen Production)

  • 이택홍;김태완;박태성;최운선;김홍열;이홍기
    • 한국수소및신에너지학회논문집
    • /
    • 제24권4호
    • /
    • pp.288-294
    • /
    • 2013
  • This gas analysis data come from the hydrogen which is produced by proton exchange membrane. Main impurities of hydrogen are methane, oxygen, nitrogen, carbon monoxide, and carbon dioxide. The concentration of impurities is ranged between 0.0191 to $315{\mu}mol/mol$ for each impurity. Methane contamination is believed from the electrode reaction between carbon doped electrode and produced hydrogen. Nitrogen contamination should take place the sampling process error, not from PEM hydrogen Production system.

화학적 분해법을 이용한 난용성 자원으로부터 희토류 회수 특성 연구 (Strategy to Recover Rare Earth Elements from a Low Grade Resource via a Chemical Decomposition Method)

  • 김리나;조희찬;정진안;김지혜;이수경
    • 자원리싸이클링
    • /
    • 제29권1호
    • /
    • pp.17-24
    • /
    • 2020
  • 침철석을 주요 맥석광물로 하는 난용성 자원으로부터 희토류를 회수하기 위해 화학적 분해-산 침출의 2단계 방법을 이용한 맥석광물 분해 및 희토류 침출율 향상 연구를 수행하였다. 화학적 분해에는 알칼리인 NaOH를 사용하였으며 NaOH 용액 농도 20-50 wt%, 광액 농도 10% (w/w), 온도는 각 농도에서 NaOH 용액이 끓지 않는 최대 온도로 하여 분해 반응을 진행하였다. NaOH 농도가 높아질수록 경희토류 (Ce, La, Nd) 와 철은 고체상의 분해 산물 내에 농축되는 경향을 나타냈으며, 알루미늄과 인은 용액상으로 제거되어 50 wt% NaOH로 분해 시 고체상에 각각 0.96%, 0.17% 만이 잔류하는 것으로 나타났다. 또한, 주요 맥석광물인 침철석의 결정성이 분해 과정 후 감소하는 것으로 분석되었다. 50 wt% NaOH 분해 산물을 3.0 M 염산, 80 ℃ 조건에서 3시간 동안 침출했을 때, 94% 이상의 희토류 침출율을 달성하였으며 (Ce 80%), 불순물 중 알루미늄 침출율이 12%, 인 침출율이 0%로 감소하여 본 광석에 대한 최적 분해 및 침출 조건으로 선정하였다. 본 실험 결과로부터 희토류와 철의 침출율 간에 양의 상관관계가 있는 것으로 분석되었으며, 따라서 침철석의 결정성 감소가 희토류 침출율 향상에 기여한다고 할 수 있다.

열처리 온도에 따른 TiO2 나노튜브의 리튬이차전지 음전극 특성 (Effect of Annealing Temperature on the Anode Properties of TiO2 Nanotubes for Rechargeable Lithium Batteries)

  • 최민규;강근영;이영기;김광만
    • Korean Chemical Engineering Research
    • /
    • 제50권1호
    • /
    • pp.25-29
    • /
    • 2012
  • 루타일(rutile) $TiO_2$ 분말의 알칼리 수열합성과 $300{\sim}500^{\circ}C$ 열처리를 통해 $TiO_2$ 나노튜브를 제조하고, 이를 리튬이 차전지의 음극 활물질로 채택하여 그 물성과 전기화학적 특성을 조사하였다. 수열반응 직후의 정제과정에서 불순물인 미세분진을 완전히 제거하여 제조된 $TiO_2$ 나노튜브는 고비표면적과 확연한 나노튜브 결정상을 보였다. 또한 열처리 온도가 증가함에 따라 등방적으로 분산된 나노튜브들이 서로 응집되어 비표면적의 감소를 초래하였다. $300^{\circ}C$ 열처리한 $TiO_2$ 나노튜브가 250 mAh $g^{-1}$의 가장 높은 초기 방전용량을 나타내었으며, 사이클과 고율 특성은 $400^{\circ}C$ 열처리한 시료가 가장 우수한 성능을 보였다.