• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.3
• /
• pp.533-541
• /
• 2001

In this paper, we proposed lowpass filter using all-pass sums of flat delay characteristics. this filter consisted of all-pass filter of parallel structure, the general analog filter is impossible to adjust the phase and the delay, using the Proposed filter, it has advantage to adjust them. And, we compared and analyzed this filter with passband width and magnitude characteristics, and the relation of group delay characteristics and cut-off frequency. Also, in order to obtain desired cut-off frequency, forming the weighing, we obtained desired cut-off frequency and group delay characteristics.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1991.10a
• /
• pp.119-122
• /
• 1991

In this paper, a new adaptive IIR notch filter employing all pass filter is proposed. Proposed all pass filter is composed of all pole and all zero sections, each of which utilizes modulation lattice filter [11]. And, adaption algorithm for proposed notch filter is also derived. In addition, the error surface for proposed IIR adaptive notch filter is analyzed. Computer simulation results reveal that the proposed adaptation algorithm works well for low SNR(signal to noise ratio) single and multiple sinusoids. And it is shown that for estimation time varying frequency, the parameter which is related to notch bandwidth is important than any other parameters.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.151-158
• /
• 2004

In this paper, an inverse filtering technique for the digital filter model is proposed. This technique enables us to obtain a stable non-causal m inverse filter by transforming (approximating) it to a causal stable inverse system. In practice, a causal FIR approximation to this inverse filter is proposed. It can be shown that the impulse response of the inverse filter for all-pass systems is simply the mirror image of the impulse response for the system. Specially, due to this symmetric property of the impulse response of all-pass systems, the proposed technique is more useful for all-pass systems than other systems. In order to illustrate the proposed inverse filtering technique, four examples are presented. Two of them are for all-pass filters. The other two examples are for IIR and FIR filters. Also, computer simulations demonstrate that the proposed technique works very well.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.1025-1031
• /
• 2006

In this paper, a deconvolution filtering method for all-pass systems based on FIR approximation is proposed. The proposed method enables us to obtain a causal stable deconvolution filter by FIR approximating a non-causal stable deconvolution filter to a causal stable one. As we can see in this paper, the impulse response of the deconvolution filter for all-pass system is simply the mirror image of the impulse response for all-pass system itself. Due to this symmetric property between all-pass system itself and its deconvolution Inter, this method can be applied to all-pass systems without special limitation of the system's order. In order to verify the performance of the proposed method. computer simulation results for 1st-, 2nd- and 400th-order all-pass systems are included.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.889-890
• /
• 2008

The design of an improved digital artificial reverberator is introduced in this paper. The system is based on an embedded all-pass filter and consists of three parts, diffusion part, delay part, and reverberation part. By using an embedded all-pass filter, reverberator is simplified and has fewer operation cycles. The performance of the designed reverberator is compared with well known commercial equipment.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1987.04a
• /
• pp.219-222
• /
• 1987

A Semi-cusion VLSI Digital Filter Design for TDM/FDM tran-smultiplexer is decribed. Using the polyphase network approach a filter bank composed of only all-pasdigital filter sections was designed. The use of all-pass filters as basic building blocks is shown to provide a Transmultiplexer structure that has low computational requirements low quanization noise and hign modularity. A design of 1st order 2nd All pass filter is done using COMS 2um double metal.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.2
• /
• pp.227-232
• /
• 1988

A semicustom VLSI design fo digital filters used in TDM/FDM transmultiplexer is described. A filter bank composed of only all-pass digital filter sections are implemented with the polyphase network. The use of all-pass filters as basic building blocks is shown to provide a trans-multiplexer structure that has low computational requirements, low quantization noise, and high modularity. The silicon compiler system is used to reduce the design time and to increase the credibility of designed filters. As a prototype, 1st and 2nd order all pass filter are designed, using CMOS N-well double metal technology. The chip sizes of first order filter and the second order filter are 2652 x 533\ulcorner\ulcorner 5334x4300\ulcorner\ulcorner respectively.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.143-150
• /
• 2004

In this paper, a recursive digital filter realization for an ionospheric channel model is proposed. This realization is in the form of a cascade of identical second-order all-pass filters, and is determined by only three parameters; two coefficients of an all-pass section, and the number of sections. The values of these parameters are optimized by a nonlinear optimization algorithm called the "downhill simplex method", so that the resulting time delay function closely approximates that of the ionospheric channel model. Comparing with the nonrecursive digital filter realization, it can be shown that the proposed recursive-digital-filter-realization is advantageous in points of view for the numbers of filter coefficients and the realization.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.850-853
• /
• 1987

A VLSI digital filter design using a semi-custom method is described. The digital filters composed of TDM/FDM Transmultiplexer are designed. Using the polyphase network approach a filter bank composed of only all-pass digital filter sections was designed. The use of all-pass filters as basic building blocks is shown to provide a transmultiplexer structure that has low computational requirements, low quantization noise, and high modularity. The silicon compiler systems is used to reduce the design time and increase the credibility of designed filters. A design of 1st order and 2nd order all pass filters is done using CMOS 2um N-well double metal cell.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.447-448
• /
• 2015

지연 등화기(Delay Equalizer) 또는 위상 필터(Phase Filter)라고도 불리는 전역 통과 필터(All Pass Filter)는 주파수의 변화와 관계없이 위상만을 변화 시키는 시간 지연 장치(Time Delay Device)이다. 모든 주파수에서 진폭의 이득이 '0' 또는 일정하지만, 위상의 특성만을 개선하기 위해 사용되는 위상 필터 이다. 본 논문은 이와 같은 전역 통과 필터(APF)의 특성을 이용하여 순시 유효 전력(Active Power) 및 순시 무효 전력(Reactive Power)의 측정 방법에 대하여 연구하였다. 전역 통과 필터(APF)의 좌표변환을 사용하여, 필터에서의 정보를 통한 유효 전력과 무효 전력 측정이 가능하다. 따라서 본 논문에서는 시뮬레이션을 통해 그 타당성을 검증하였다.