• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.693-698
• /
• 1997

The refractive index and dispersion in the (100-x)(0.6CaO.0.4Al2O3).xSiO2(x=0~30) glasses were investigated. As the amount of SiO2 increased, the refractive index decreased. The change of refractive index was attributed to the change of the molar refraction rather than the molar volume. When the amount of SiO2 was smaller than 20 mol%, the average electronic transition energy gaps(E0) and the electronic oscillator strengths(Ed) were about 10.9($\pm$0.1) nd 18($\pm$0.5)eV, respectively. However E0 and Ed of the glass (CAS30) with 30 mol% SiO2 increased to 12.63 and 19.89eV, respectively. The similar results was observed in the variation of Abbe Number. Abbe number of the glass in the range of 0~20 mol% SiO2 was about 46 and that of CAS30 increased to 60. The zero-material dispersion wavelength({{{{ lambda }}0) of pure calcium aluminate glass was 1.8 ${\mu}{\textrm}{m}$. As the amount of SiO2 increased, the zero-material dispersion wavelength shifted to a shorter wavelength. {{{{ lambda }}0 of CAS30 was 1.5 ${\mu}{\textrm}{m}$, that is currently using for the optical telecommunication system.

• 한국전기전자재료학회논문지
• /
• 제33권4호
• /
• pp.249-254
• /
• 2020

An 80 nm thick zinc aluminate thin film was deposited on a glass substrate via radio-frequency (rf) magnetron sputtering and heat treated to analyze changes in the wetting angles due to a surface modification. The thin films were modified from hydrophilic to hydrophobic by a simple thermal treatment. The surface modification from a heat treatment increased the wetting angles up to 111°, which was explained by the relationship with the excess surface area. The wetting angles of the annealed thin films decreased with increasing exposure time under ambient conditions, which was attributed to the oxygen vacancies in the films that were introduced during deposition. The annealed thin films were treated by ionized oxygen via oxygen plasma. After the oxygen plasma treatment, the decreased wetting angles were maintained at ~95° for 11 days.

• 한국세라믹학회지
• /
• 제31권7호
• /
• pp.695-702
• /
• 1994

Current study was undertaken to explain the structural evolution and corresponding changes in the properties of calcium aluminate glasses with the variation of SiO2 doping concentration. Calcium aluminate glasses in the compositional ranges of (100-x)(0.6CaO+0.4Al2O3)+xSiO2(where x=0~60) were fabricated. DTA analysis confirmed an anomalous behavior in glass transition temperature (Tg) with the maximum of 887$^{\circ}C$ and minimum of 859$^{\circ}C$ when x=5 and 50, respectively. densities and refractive indices monotonically decreased with increasing SiO2 content and IR transmitting cutoff shifted to shorter wavelength side when the amount of added SiO2 exceeded 5 mole%. IR fundamental vibration absorption peaks showed the change that NBOs were inclined to SiO4 tetrahedron in the low-silica region and NBO per SiO4 tetrahedra changed from 2 to 0 with increasing silica content. Based on the analysis of IR fundamental vibration absorption peaks, the model of the structural change can be proposed in three step: 1) SiO4 scavenged the NBOs located at AlO4-tetrahedra, which resulted in the increased of Tg values, 2) NBOs located in the main network again with a decrease in Tg, and 3) dominated by the decrease in the relative amount of NBOs in the glass system, where Tg re-increased.

• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.389-398
• /
• 1994

Calcium aluminate glasses transmit light at relatively long wavelengths up to 6 ㎛ and exhibit also low Rayleigh scattering values. However they have a tendency to get devitrified easily, which limits their use as routine optical materials. Here, the ternary system CaO-Al2O3-SiO2 glasses with low-silica (<30 mol%) were prepared to prevent the devitrification of CaO-Al2O3 glasses and the properties were investigated as functions of composition. The addition of SiO2 to calcium aluminate glasses promoted their stability, which was due to the decrease of non-bridging oxygens and the reconnection of network. As SiO2 was added, density, refractive index, molar volume of oxygens and thermal expansion coefficient decreased continuously. But the glass transition temperatures with increasing SiO2 contents were raised and then lowered. It was postulated that the anomaly was related to the changes of the middle range order as well as the short range order. As the amount of SiO2 in the glass was increased, the IR cut-off values moved to shorter wavelength owing to 'Si-O' antisymetric stretching vibration. The IR cut-off wavelength of the glasses with 5 and 30 mol% SiO2 was 4.90, 4.55 ㎛, respectively.

• 한국세라믹학회지
• /
• 제44권3호
• /
• pp.175-181
• /
• 2007

Molecular dynamics simulation (MD) of $(62-x)CaO{\cdot}38Al_{2}O_{3}{\cdot}xBaO$ glasses has been carried out using empirical potentials with the covalent term. The simulations closely reproduce the total neutron correlation functions of glass with 5 mol% BaO and physical properties of these glasses such as elastic constants. For these glasses, aluminum is tetrahedrally coordinated by oxygen, but there is a part of five-fold and six-fold coordination of aluminum. There are no major changes to the mid-range structure of glass, as barium is substituted for calcium. To predict the barium coordination number, we have used the bond valence (BV) theory and also compared the results of simulation with Bond valence. The coordination number for oxygen around barium atoms is close to 8 and the average distance of barium and oxygen is nearly 2.80 A. The viscosity of these glasses increases with the content of barium oxide substituted for calcium oxide.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.438-445
• /
• 2002

본 연구에서는 $PbO-TiO_2-SiO_2-BaO-ZnO-Al_2O_3-CaO-B_2O_3-Bi_2O_3-MgO$계의 유리를 $1,400{\circ}C$에서 용융시킨 후, 급랭, 분쇄하여 glass frit을 제조하였다. Glass frit 분말을 일축가압성형한 후 $750~1,000{\circ}C$의 온도범위에서 2시간 동안 소성 및 결정화 하였다. Glass frit의 결정화는 $750{\circ}$ 전후의 온도에서 시작되었고, 저온에서의 주된 결정상은 $Al_2O_3$와 hexagonal celsian($BaAl_2Si_2O_8$)이었다. 소성온도가 높아지면서 monoclinic celsian, $ZnAl_2O_4,\;Zn_2SiO_4,\;CaTi(SiO_4)O,\;TiO_24 등이 주된 결정상으로 나타났고, 특히 celsian은 hexagonal에서 monoclinic으로 상전이가 발생하였다. 그리고 15wt%의 PbO를 첨가한 glass frit에만 $PbTiO_3-CaTiO_3$ 고용체가 나타났다. 1MHz 대역에서 유전특성을 살펴본 결과 유전상수는 11~16이었고, 유전손실은 0.020 미만이었다. 그러나 15wt%의 PbO를 첨가한 glass frit의 경우는 $PbTiO_3-CaTiO_3$ 고용체 결정상의 존재로 유전상수가 17~26으로 높았고, 유전손실은 0.010~0.015로서 다른 조성들에 비하여 우수한 특성을 나타내었다.

• 보존과학회지
• /
• 제38권1호
• /
• pp.1-13
• /
• 2022

Colour consistency is an important consideration when selecting pigments used on works of art. In this study, we analyse the colour difference between two sets of synthetic blue glass pigments acquired at least 8 years apart from the same manufacturer in Japan. The old pigment set (unused, dry powder with four different grain sizes) appears faded compared to the new set. These pigments are made available for artistic use, commonly in Nihonga or Japanese paintings. Raman spectroscopy and SEM-EDS results characterize these pigments as cobalt aluminate spinels dissolved in leaded glaze, a special class of complex coloured inorganic pigments that is not well-understood in the field of conservation. Colour difference between the old and new pigments with four different grain sizes were quantified by analysing photomicrographs with image analysis software. Blue pigments with coarse and extremely fine grains showed significant colour change compared to pigments with medium and fine grain sizes. The high occurrence of crystallites in the finer grains give a final colour that is bluer and lighter. Possible causes for the colour difference including manufacturing methods and storage environment are discussed.

• 한국세라믹학회지
• /
• 제33권9호
• /
• pp.1050-1056
• /
• 1996

• 한국결정성장학회지
• /
• 제23권5호
• /
• pp.255-264
• /
• 2013

$CoAl_2O_4$는 열적 및 화학적으로 매우 안정한 물질이며 독특한 광학적 특성으로 인해 도자기 제품, 유리, 페인트, 플라스틱을 장식하는 세라믹 착색제로 사용되어져 왔다. 본 연구에서는 착체중합법(Polymerized complex method)과 고상합성법(Solid state reaction)을 이용하여 단상의 $CoAl_2O_4$ 청색 무기 안료를 합성하였고, 잉크젯 프린팅용 잉크로의 응용 시 노즐 막힘 및 분산안정성과 같은 문제점을 방지하기 위해 고에너지 밀링 공정 중 하나인 어트리션밀을 이용하여 입자를 미세화하였다. 밀링 공정은 직경 1 mm의 지르코니아 볼을 이용하여 BPR(Ball to powder weight ratio) 100 : 1, 800 rpm의 조건에서 3시간 동안 진행되었다. 합성된 안료는 XRD, FE-SEM, TEM, PSA, 그리고 CIE $L^*a^*b^*$ 측정을 통하여 어트리션밀링 전후의 특성을 분석하였다. XRD 측정 결과 단상의 $CoAl_2O_4$ 청색 무기 안료가 합성되었고, 고에너지 밀링 공정을 통하여 100~200 nm의 입자 크기를 가지는 청색 나노 무기 안료를 얻었다.