• Journal of Microbiology and Biotechnology
• /
• v.20 no.3
• /
• pp.485-493
• /
• 2010

A modified graphite felt electrode with neutral red (NR-electrode) was shown to catalyze the chemical oxidation of nitrite to nitrate under aerobic conditions. The electrochemically oxidized NR-electrode (EO-NR-electrode) and reduced NR-electrode (ER-NR-electrode) catalyzed the oxidation of $1,094{\pm}39$ mg/l and $382{\pm}45$ mg/l of nitrite, respectively, for 24 h. The electrically uncharged NR-electrode (EU-NR-electrode) catalyzed the oxidation of $345{\pm}47$ mg/l of nitrite for 24 h. The aerobic bacterial community immobilized in the EO-NR-electrode did not oxidize ammonium to nitrite; however, the aerobic bacterial community immobilized in the ER-NR-electrode bioelectrochemically oxidized $1,412{\pm}39$ mg/l of ammonium for 48 h. Meanwhile, the aerobic bacterial community immobilized on the EU-NR-electrode biochemically oxidized $449{\pm}22$ mg/l of ammonium for 48 h. In the continuous culture system, the aerobic bacterial community immobilized on the ER-NR-electrode bioelectrochemically oxidized a minimal $1,337{\pm}38$ mg/l to a maximal $1,480{\pm}38$ mg/l of ammonium to nitrate, and the community immobilized on the EU-NR-electrode biochemically oxidized a minimal $327{\pm}23$ mg/l to a maximal $412{\pm}26$ mg/l of ammonium to nitrate every two days. The bacterial communities cultivated in the ER-NR-electrode and EU-NR-electrode in the continuous culture system were analyzed by TGGE on the $20^{th}$ and $50^{th}$ days of incubation. Some ammonium-oxidizing bacteria were enriched on the ER-NR-electrode, but not on the EU-NR-electrode.

• The Korean Journal of Ecology
• /
• v.17 no.3
• /
• pp.251-260
• /
• 1994

Nitrification potential bioassay and terpenoid analyses were performed to determine the roles of terpenoid as an inhibitor of nitrification in the Douglas fir (Pseudotsuga menziesii) forests. The effect of terpenoids in the forest floor was also tested by adding $10{\mu}g/ml$ of four terpenoids(${\alpha}-pinene,{\beta}-pinene,{\gamma}-terpinene, and terpinolene) to mineral soils. The amount of terpenoids in the litter was higher than that in the soil and varied over time, but the amount of terpenoids in the soils was relatively constant. The correlation between the amount of terpenoids in the litter and ammonium oxidation was in inverse proportion to that in the mineral layers $(r^2=0.678)$. Inhibition of ammonium oxidation by terpenoids in the litter was always higher than in the mineral layer, but nitrite oxidation was different from the ammonium oxidation. The fact that there was greater nitrate production from ammonium in the mineral layer than in the forest floor layer seems to be due to the less amounts of terpenoids in the mineral layer. The result of the experiment in which four terpenoids were added to the mineral layer suggests that, after some lag time, the four terpenoids were effective in inhibiting ammonium oxidation. However, nitrite oxidation did not appear to be affected by the four terpenoids. Accordingly, all of our results suggested that terpenoids in Douglas fir forests apparently would act as a part of the inhibitors of nitrification.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.231-244
• /
• 2020

As a way of finding value-added materials from waste medium density fiberboard (MDF), this study characterized cellulose nanocrystals (CNCs) isolated by ammonium persulfate (APS) oxidation using recycled MDF fibers. Chemical composition of the recycled MDF fibers was done to quantify α-cellulose, hemicellulose, lignin, nitrogen, ash and extractives. The APS oxidation was performed at 60 ℃ for 16 h, followed by ultrasonication, which resulted in a CNC yield of 11%. Transmission electron microscope images showed that rod-like CNCs had an average length and diameter of 167±47 nm and 8.24±2.28 nm, respectively, which gave an aspect ratio of about 20. The conductometric titration of aqueous CNCs suspension resulted in a carboxyl content of 0.24 mmol/g and the degree of oxidation was 0.04. Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy clearly showed the presence of carboxyl group on the CNCs prepared by the APS oxidation. The change of pH of the aqueous CNC suspension from 4 to 7 converted the carboxyl group to sodium carboxylate group. These results showed that the APS oxidation was facile and CNCs had a one-step preparation method, and thus suggested an optimization of the oxidation condition in future.

• Environmental Engineering Research
• /
• v.19 no.1
• /
• pp.23-29
• /
• 2014

In this study, aerobic granules were applied to a lab-scale aerobic granule sludge airlift reactor (AGSAR) and the ammonium nitrogen oxidation performance was evaluated at different ammonium nitrogen loading rate (NLR). At least 99% of the initial ammonium nitrogen was oxidized at an NLR of 0.27 and 0.53 kg $NH_4{^+}-N/m^3{\cdot}day$, for both aerobic granules (control), and nitrifying aerobic granules (NAGs). The ammonium nitrogen oxidation deteriorated, when the NLR was increased to 1.07 kg $NH_4{^+}-N/m^3{\cdot}day$. The NAGs were characterized by complete nitrification, while partial nitrification was observed in the control.

• KSBB Journal
• /
• v.16 no.6
• /
• pp.573-578
• /
• 2001

The effects of organic supplement (acetate) and dissolved oxygen concentration on the nitrification rate of wastewater were investigated in the 27.7 L pilot-scale airlift biofilm reactor with the granular activated carbon media of 0.613 mm diameter. The ammonium oxidation rate increased stepwise up to 5 kg N/㎥$.$d at the riser air velocity of 0.063 m/s, when the air velocity and the ammonium loading rate were raised alternately. The nitrite build-up was observed during the early stage of the biofilm formation, which disappeared after the reactor operation of 128 days. As increasing the organic loading rate, the organic oxidation rate increased up to 25.0 kg COD/㎥$.$d with the removal efficiency of 94% but the oxidation rates of ammonium and nitrite decreased. The oxidation rates of ammonium and nitrite increased with the dissolved oxygen concentrations. When the pure oxygen was sparged, the ammonium oxidation rate was almost five times higher than that with air at the same velocity.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2149-2155
• /
• 2012

A metal-free and efficient procedure for the oxidation of alcohols into the corresponding carbonyl compounds has been described using ammonium nitrate in the presence of silica sulfuric acid under mild and heterogeneous conditions. The use of non-toxic and inexpensive materials, simple and clean work-up, short reaction times and good yields of the products are among the advantages of this method.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.2
• /
• pp.135-142
• /
• 2021

The activity of anaerobic ammonium oxidation (ANAMMOX) immobilized in synthetic media (Poly Ethylene Glycol, PEG) and granular form was evaluated comparatively to investigate the effect of influent nitrogen concentration and exposure of oxygen. In ANAMMOX granule reactor, when concentration of influent total nitrogen increased to 500mg/L, removal efficiency of ammonium, nitrite and nitrate were shown to 90.5±6.5, 96.6±4.9, and 93.2±6.1%, respectively. In the case of the PEG gel, it showed lower nitrogen removal performance, resulting in that the removal efficiency of ammonium, nitrite and nitrate were shown to 83.3±13.0, 96.4±6.1, and 90.3±7.5%, respectively. In second step, when exposed to oxygen, the nitrogen removal performance in the ANAMMOX granule reactor also remained stable, but the activity of PEG gel ANAMMOX was found to be inhibited. Consequently, the PEG gel ANAMMOX was a higher sensitivity than that of granular ANAMMOX with two variables applied in this study.

• Journal of Environmental Science International
• /
• v.12 no.10
• /
• pp.1071-1077
• /
• 2003

The aim of this study is, firstly, to find out what kinds of inorganic species are produced in the photocatalytic oxidation of ammonium-nitrogen containing water and, secondly, to seek the influence of anion for the photocatalytic oxidation of ammonium contained compounds. The photoenergy above 3 eV(λ <415 nm) was effectively absorbed by TiO$_2$ and TiO$_2$/polymer was used to be oxidized NH$_4$-N in wastewater to NO$_3$-N. Existing the anion as Cl$\^$-/, the rate of photocatalytic oxidation decreased regardless of other condition. This result showed that the chloride ions reduced the rate of oxidation by scavenging oxidizing radical species as OH$\^$-/ and OCl$\^$-/. Some of the added ion might have blocked the active sites of the catalyst surface, thus deactivated the catalyst.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.3
• /
• pp.469-474
• /
• 2006

Partial nitrification blocking of the oxidation of nitrite ($NO_{2}^{-}$) to nitrate ($NO_{3}^{-}$) has cost-efficient advantages such as lower oxygen and organics demand for nitrification and denitrification, respectively. A nitrifying membrane bioreactor of submerged type was operated for the treatment of synthetic ammonium wastewater with the purpose of nitrite build-up without affecting the efficiency of ammonium oxidation. A high ammonium concentration (1,000 mg/l) was completely converted to nitrate at up to 2 kg $N/m^3$ day under sufficient aeration. The control of pH under sufficient aeration was not a reliable strategy to maintain stable nitrite build-up. When the dissolved oxygen concentration was kept at 0.2-0.4 mg/l by adjusting the aeration rate, about 70% of nitrite content was obtained with ammonium oxidation efficiency higher than 93%. The increase of suction pressure due to membrane fouling was not significant under lowered aerating environment over a 6-month period of operation. The composition of nitrifier community, including relative abundance of nitrite oxidizers in a nitrite-accumulating condition, was quantified by fluorescence in situ hybridization analysis.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.300-307
• /
• 2006

Anaerobic ammonium oxidation(ANAMMOX) is a novel process fur treatment of piggery waste with strong nitrogen. In this study, we investigated acid fermentation of organic matter, denitrificatiot reduction of sulfur compounds and P crystalization by hydroxyapatite during the treatment of wastewater with high strength of ammonium and organic matters by ANAMMOX process. Also, functions of hydroxylamine and hydrazine as intermedeates of ANAMMOX process were tested. This study reveals that various complex-reactions with anaerobic ammonium oxidation of piggery waste are happened and hydroxylamine and hydrazine play an important role in ANAMMOX reaction.