• Journal of Korea Technology Innovation Society
• /
• v.3 no.3
• /
• pp.67-84
• /
• 2000

This paper expanded the usefulness of technology relation analysis by applying to R&D activities of Korea Gas Corporation (Kogas) at the corporate level. Technology relation analysis has been applied to assessment of R&D investments in telecommunication and construction industries in Korea. As empirical findings, technology map and technology spillover matrix of Kogas have been derived by technology similarity analysis. It has bee found that various useful information for R&D assessment could be acquired from the technology relation analysis at the corporate level.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.4
• /
• pp.104-110
• /
• 2001

The objective of this study is structural analysis of continuous casting mold. A two-dimensional finite element model was developed to compute the temperature distribution, thermal stress and thermal strain behavior for continuous casting mold. Structural analysis was made using thermal analysis result, utilizing transient analysis of ANSYS. This structural analysis results, many variables such as casting speed, cooling condition film coefficient, convection and load condition are considered.

• Communications for Statistical Applications and Methods
• /
• v.9 no.2
• /
• pp.543-553
• /
• 2002

Principal component analysis is applied to reduce p-dimensions into q-dimensions ( $q {\leq} p$). Any partition of a collection of data points with p and q variables generated by the application of six hierarchical clustering methods is re-classified by discriminant analysis. From the application of discriminant analysis through each hierarchical clustering method, correct classification ratios are obtained. The results illustrate which method is more reasonable in exploratory data analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.307-312
• /
• 1996

A torsional vibration analysis of a multi-stage reduction gear box connected to a gas turbine system is presented. For a free vibration analysis the Modified Hibner Branch Method, so called "Blank Matrix Method", and the .lambda.-Matrix Method are used in the modeling and the eigenvalue solution, respectively. Also, a short circuit forced analysis of the system is performed, utilizing the energy method modeling. It is shown that the results of the free vibration analysis have the same tendency as those of the short circuit analysis. analysis.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.2
• /
• pp.145-152
• /
• 2006

This paper presents a windows application for voltage sag analysis and effective data visualization. The developed Voltage Sag Analysis Tool (VSAT) was designed by using the Object-Oriented Programming (OOP) concept and C++ programming language. The VSAT provides basic functions for voltage sag analysis such as power flow analysis, short circuit analysis and stochastic analysis. In particular, the VSAT provides effective data visualization through computer graphics and animation. Analysis results are expressed realistically and intuitively on geographical display. The Graphic User Interface (GUI) of VSAT was designed specifically for voltage sag analysis. In this paper, the development and implementation of VSAT is presented. In order to demonstrate the capabilities of VSAT, it is used to analyze the Jeju Island power system in South Korea.

• Journal of Korean Port Research
• /
• v.14 no.3
• /
• pp.331-340
• /
• 2000

For the rational and economic design of the structural elements of ships which is built using welding, the ultimate strength analyses of the plates having initial imperfections, such as welding residual stresses and strains, are needful. The welding deformation usually relied on approximative equations or based on expert's experience. But in this paper, for the thermal elasto-plastic analysis of plates, the finite element analysis was performed, based on initial strain method. In formulating the incremental analysis, unbalanced force terns were included. In the plastic domain during the incremental process, the 2nd order terns stress increment and yield stress increment were considered, so that time increment could be controlled for a more stable solution. The ultimate strength analysis program of the plates having initial imperfections was made. The ultimate strength analysis was carried out based on the results of the welding deformations of this paper. In the ultimate strength analysis the Rayleigh-Ritz method based on the minimum potential theory was used.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.8 no.2
• /
• pp.18-26
• /
• 2002

Films of methylcellulose(MC), chitosan and their blends were prepared using water and acid solution as a solvent. The transition behavior and miscibility of polymers and their blends were characterized by dynamic mechanical analysis(DMA) and thermogravimetric analysis(TGA). The DMA analysis of PEG400/MC blends has shown that PEG400 was compatible with MC and was effective plasticizer since the curves of $tan{\delta}$ against temperature exhibited single peak, corresponding to single glass transition temperature, which were displaced to lower values with increasing PEG400 content. Results of DMA analysis and TGA analysis of MC/chitosan blends indicate that there are some miscibility between MC and chitosan in the blends, attributed to the similarities between two polysaccharides and interactions of two polymers in the blends. The inclusion of PEG400 in the blends increase the miscibility between two components in the blends.

• The Research Journal of the Costume Culture
• /
• v.11 no.1
• /
• pp.47-65
• /
• 2003

The purpose of this study was to examine the characteristics of consumer evaluative criteria based on clothing quality perception of adult males and females. A demonstrative study was conducted using a questionnaire on adults over 20 years old who were considered to afford to purchase clothes. A total of 650 questionnaires were distributed, and among them, 380 were used for the demonstrative analysis. The study used SPSSWIN V.8.0 for the analysis. Factor analysis and reliability analysis were introduced as analysis methods using the varimax rotation to classify consumer evaluative criteria for clothing purchasing. In addition, frequency analysis, correlation analysis, 1-test, multiple regression analysis, and duncan test are executed. The study result is as follows. First. expectation, importance and performance are examined by customer quality perception. Four factors- practicability, care, aesthetics, and symbolism- are classified through the factor analysis of 19 evaluative attributes based on importance. Second, differences of quality perception f3r expectation, importance and performance were found partly in customers' demographic characteristics. Third, the influential relation of satisfaction and quality perception is examined. Aesthetics and practicability have significant influence on the general satisfaction of evaluative attributes by performance.

• Transactions of Materials Processing
• /
• v.11 no.2
• /
• pp.147-154
• /
• 2002

The tension levelling Process is Performed to elongate the strip plastically In combination of tensile and bending strain so that all longitudinal fibers In the strip have an approximately equal amount ofn length and undesirable strip shapes are corrected to the flat shape. Thus paper is concerned with a simulation of the tension levelling process based on the analysis of tile unit model for the tension leveller. Analysis technique such as the sequential analysis of the unit model is suggested and verified with the assembly analysis of the unit model for the effective arts economic analysis of the full set of the tension leveller. Analysis of the full tension levelling Process using sequential unit models Is carried out for steel strips with the shape defect and provides the effect of the intermesh and optimum amount of the intermesh in tension levelling process.

• 시스템엔지니어링워크숍
• /
• s.4
• /
• pp.123-134
• /
• 2004

This paper deals with the feasibility analysis and alternatives for infrared detector development. The purpose of this paper analyze development requirement and feasibility study in both technology and cost. We get raw input data for system engineering process from development and technical expert, and then analyze cost and technology for development feasibility, and alternative study. Infrared Detector is core component of Thermal Imaging System and developed by ADD from 2006 to 2008 year. Technical level is analyzed by TRL(Technical Readiness Level) and AOA(Analysis of Alternative) is done by development and production cost estimate. We use SEER-H tool for cost estimate, that is parametric cost estimate tool based on Knowledge Base. Also this paper presents risk analysis for project management because it is necessary to risk driver management during the infrared detector development. The result of IR Detector feasibility and alternative study will be used in technical and cost analysis. This study can help those who are related to the cost analysis and development feasibility of other weapons