• Title/Summary/Keyword: Angle measurements

Search Result 1,320, Processing Time 0.028 seconds

A study of morphology of mandibular symphysis and location of lower incisor under the influence of the craniofacial skeleton in skeletal Class III malocclusion (골격성 III급 부정교합자의 두개안면형태에 대한 하악이부의 형태 및 하악절치의 위치에 대한 연구)

  • Kim, Seong-Sik;Park, Je-Uk;Son, Woo-Sung
    • The korean journal of orthodontics
    • /
    • v.28 no.5 s.70
    • /
    • pp.763-774
    • /
    • 1998
  • The purpose of this study was to evaluate the morphology of mandibular symphysis and location of lower incisor under the influence of the craniofacial skeleton in skeletal Class III malocclusion. The sample consisted of 132 adults who have severe Class III malocclusion(prognathism group, 33 males and 33 females), and who have normal occlusion(normal group, 33 males and 33 females). They had not received any orthodontic treatment or orthognathic surgery. The lateral cephalograms were evaluated. The results were as follows : 1. Prognathism group were larger than normal group in comparison of facial skeleton (p<0.05) with the exception of ${\angle}FH-Pal$, ${\angle}SNA$. 2. In the morphology of symphysis, measurements of anteroposterior width(LaABBW, LiABBW, SW) of prognathism group were significantly less than that of normal group(p<0.001). 3. In the correlative analysis between the craniofacial skeleton and symphysis measurements of prognathism group, vertical measurements in relation with cranial base and mandibular plane showed reverse correlationship with anteroposterior width of symphysis(LiACBW, LaACBW, LiABBW, SW)(p<0.05). But, there was not distinct difference between horizontal skeletal measurements and symphysis measurements(p>0.05). 4. The probability by regression test between vertical measurements(${\angle}SN-Mn,\;{\angle}FMA,\;{\angle}Pal-Mn,\;{\angle}LFH$) and symphysis measurements(LiACBW, LiABBW, SW, ${\angle}LISA$) were very high(p<0.001).

  • PDF

A Study on the Analysis of Foot Shape (I) -on Classification of Foot Type- (발의 형태분석에 관한 연구(I) -발의 형 분류를 중심으로-)

  • Moon Myeng-ok;Kwon Young-suk
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.12 no.1 s.26
    • /
    • pp.45-52
    • /
    • 1988
  • To classify the foot type, direct measurements, metatarso-phalanx angle and foot print angle of the right and left foot were measured and analyzed. The results are as follows. 1. The correlation coefficients between right and left foot were high degree, and except medial malleous height, the diffences between right and left foot are not significant. 2. The correlation coefficient among direct measurements of the foot are high degree, tut the correlation coefficients between direct measurements and metatarso-phalanx angle and foot print angle are no or low degree. Therefore, to recognize the foot type, the direct measurements, metatarso-phalanx angle and foot print angle need to be measured independently. 3. According to foot width/foot $length{\times}100$ which is the slender degree of foot, three groups are distinguished: one is slender type of which foot width/foot $length{\times}100$ is less than $40.14\%$, two is standard type of which foot width/foot $length{\times}100$ is $40.14\%{\~}44.30\%$, three is broad type of which foot width/foot $length{\times}100$ is more than $44.30\%$. 4. On the photographs metatarso-phalanx angle was measured, and two groups are distinguished: one is normal type of which the metatarso-phalanx angle is more than $160^{\circ}$ and the other is the deformed type of which the metatarso-Phalanx angle is less than $159^{\circ}$. 5. By foot print angle $30^{\circ}$ which need reformation of the foot, two groups are distinguished: one is normal foot print angle of which the angle is more than $30^{\circ}$ and the other is flat foot print angle of which the angle is less than $30^{\circ}$. 6. Classifications by foot width/foot $length{\times}100$, metatarso-Phalanx angle and foot Print angle are put together, and then foot types are classified into 12 groups such as Table 11.

  • PDF

A STUDY ON THE CEPHALOMETRIC SIMILARITY BETWEEN PARENTS AND OFFSPRING IN CLEFT LIP WITH OR WITHOUT PALATE (순ㆍ구개열 환자의 두부규격방사선사진상을 이용한 친자간의 유사성에 관한 연구)

  • Cho Su-Beom;Lee Un-Gyeong;Na Seung-Moh;Koh Kwang-Joon
    • Journal of Korean Academy of Oral and Maxillofacial Radiology
    • /
    • v.24 no.2
    • /
    • pp.381-390
    • /
    • 1994
  • The purpose of this study was to determine whether any similarity existed in craniofacial morphology between parents and offspring in cleft lip with or without cleft palate. Thirty three measurements of the various regions of cranium and face were obtained from lateral cephalometric radiograms in 28 families comprising 28 fathers, 28 mothers and 28 cleft patients. The measurements of cleft patients were compared with those of their fathers, mothers and midparents. The obtained results were as follows: 1. There were similar measurements between the cleft patients and their fathers; rama1 height(Ar-Go), mandibular angle(∠MP-RP). 2. There were similar measurements between the cleft patients and their mothers; cranial base angle(∠NSBa), relation of maxilla to the cranial base(∠SNA), relation of maxilla to the cranial base(soft tissue:∠BaN'Sn), angle of inferior border of mandible(∠SNL-MP) and convexity of nose apex(soft tissue:∠N'PmPog'). 3. There were similar measurements between the cleft patients and their midparents; ramal height (Ar-Go), cranial base angle( ∠NSBa), relation of maxilla to the cranial base(soft tissue: ∠BaN'Sn), Y axis angle(∠NSGn) and mandibular angle(∠MP-RP). 4. There was no similar measurements between the cleft patients and their fathers and mothers simultaneously.

  • PDF

Correlations Among Objective Measurements of Spasticity in Patients With Brain Lesions

  • Kim, Yong-Wook
    • Physical Therapy Korea
    • /
    • v.14 no.4
    • /
    • pp.7-13
    • /
    • 2007
  • The purpose of this study was to investigate correlations among objective measurements of spasticity in patients with brain lesions. Thirty-two stroke and traumatic brain injury subjects participated in the study. Spasticity was quantified using the knee first flexion angle, relaxation index obtained from a pendulum drop test, and the amplitude of a knee tendon reflex test. Pearson's product correlation coefficient was used to examine relationships among these measurements of spasticity. There was a significant positive correlation between the relaxation index and knee first flexion angle in patients with brain lesions (r=.895, p<.01). There was also significant negative correlation between the amplitude of knee tendon reflex and relaxation index (r=-.612, p<.01), and between amplitude and knee first flexion angle (r=-.537, p<.01). Thus, it is possible to use the knee first flexion angle as an objective measure of spasticity, rather than relaxation index, which is more complicated to obtain. Further studies are needed to explore the effects of functional improvement and long-lasting carryover effects of spasticity using a simple objective measure such as the knee first flexion angle from a pendulum test.

  • PDF

THE EPIDEMIOLOGIC STUDY ON DENTAL MALOCCLUSION AND SKELETAL FACIAL PATTERN (부정교합과 골격성 안모형태에 관한 역학적 연구)

  • Cho, Kyu-Seok;Lee, Ki-Soo
    • The korean journal of orthodontics
    • /
    • v.17 no.1
    • /
    • pp.107-117
    • /
    • 1987
  • The study was designed to examinate the discrimination rate of 4 antero-posterior cephalometric measurements from Angle's malocclusion groups. The material was 246 cephalometric radiographs taken from 42 Normal occlusions, 83 Class I malocclusions, 64Class II Division I malocclusions, 57Class III malocclusions. ANB angle, APDI, AB/OP angle, and Wits appraisal as measurements of antero-posterior skeletal relationship were measured on the cephalometric radiographs and statistically analyzed by the Canonical Discriminant Function. The results of this study were as follows: 1. ANB angle, APDI, AB/OP angle, and Wits appraisal were clinically useful measurements for the evaluation of the antero-posterior skeletal relationship. 2. The rates that discriminate actual malocclusion groups were $77.45\%$ in Wits appraisal, $74.02\%$ in AB/OP angle, $71.08\%$ in ANB angle, and $70.59\%$ in APDI. 3. The discrimination rate of actual Class III malocclusion show above $93\%$, but actual Class I and Class II division I malocclusions were relatively low.

  • PDF

Classification of Upper Body Somatotypes according to the Age Group : Using 3D-Body Scan Data

  • Na, Hyun-Shin
    • International Journal of Costume and Fashion
    • /
    • v.5 no.1
    • /
    • pp.1-13
    • /
    • 2005
  • Two hundreds of female aged 19 years old and up were recruited to evaluate the postural changes and bilateral variation of asymmetry over age. To find out the differences among the age group, subjects were classified into 5 groups, early young age(19-29), late young age(30-39), early middle age(40-49), late middle age(50-59), and old age(60-). 35 body measurements were taken by the 3-D body scanner which allowed us to take measurements which cannot be measured using traditional methods, including the shape of a cross section, slice area surface are, and volume. Bilateral variations were observed as a function of age; Depth of scapular point level, scapular point to center back, and blade angle. Postural change of anterior cervical angle, upper anterior thoracic angle, upper posterior thoracic angle, posterior cervical angle, and center back/center front ratio were also exhibited. In each measurements, subjects were classified into normal, and abnormal group. Percentiles of abnormal in shoulder line angle, blade angle, neck point $\∼$ acromial point $\∼$ scapular point, posterior cervical angle, and upper posterior thoracic angle were increased over age group. The upper body of lateral view was classified into 3 types of posture based on the previous research; straight, erect(leaning back), and stooped(bent forward). The percentiles of subjects who have straight postures were decreased as a function of age, but those of stooped postures were increased. Subjects who have erect postures did not so. The stooped posture group shows the big cervical fossa angle, anterior cervical angle, posterior cervical angle, upper posterior thoracic angle, and the small upper anterior thoracic angle comparing to the straight and erect posture group. These results could be apply for clothing construction reflecting the changes in back, shoulder, neck, and the bilateral asymmetry according to the target age group.

CEPHALOMETRIC MEASUREMENT ACCORDING TO SKELETAL MATURITY STAGE OF THE HAND AND WRIST (수완부골성숙단계에 따른 두부방사선계칙학적 연구)

  • Choi, Hae-Woon;Kim, Jae-Hyung
    • The korean journal of orthodontics
    • /
    • v.17 no.1
    • /
    • pp.135-148
    • /
    • 1987
  • To investigate the relationship between craniofacial growth and bone maturity of the hand wrist in normal occlusion, the author took cephalogram and handwrist radiogram of 391 students (male 192, female 199) and assessed the measurements of cephalogram according to skeletal maturity stages of the hand and wrist. In this study, four skeketal stages and 36 linear, angular measurements of the cephalometrics were selected. In hand-wrist X-ray the bones used to determine skeletal maturity were the middle phalanges of the third finger, and distal epiphysis of the radius. In cephalogram, the landmark used to measure the angle and length were N, S, Po., Ar., Go., Me., Gn., Pog., Point B, Point A, ANS, PNS, Or., U1, L1, U6, L6 etc.. The results were as follows, 1. The table of mean, standard deviation, p-value from measurements were made in each group and both sex. 2. The increased measurements according to skeletal maturity were anterior cranial bese length, posterior cranial base length, ramus height, anterior facial height, posterior facial height, L1 to mandibular plane (mm), facial plane angle. In contrast to, decreased measurements were genial angle, facial cnvexity and facial plane angle. 3. Denture pattern measurements (IMPA, FMIA, occlusal plane to Go-Gn, interincisal angle, U1 to SN plane, U1 to SN plane, U1 to facial plane, L1 to facial plane etc.) .had nothing to do with skeletal maturity. 4. Skeletal maturity had close relationship with craniofacial growth, but had little to do with tooth development.

  • PDF

A STUDY 01 OEEP ()VER81TE AND OPEN BITE BY VERTICAL CEPHALOMETRIC ANALYSIS (수직두개계측법에 의한 과개교합 및 개교에 관한 연구)

  • Jun, Youn Sic;Ryu, Young Kyu
    • The korean journal of orthodontics
    • /
    • v.11 no.2
    • /
    • pp.109-123
    • /
    • 1981
  • The author studied and analyzed statistically 112 adults female ranging in age from 18 to 20 years with normal occlusion, 56 adults female ranging in age from 18 to 24 years with deep overbite and 53 adults female ranging in age from 18 to 28 years with open bite by vertical cephalometric analysis. The results were as follows; 1. In comparing normal occlusion with deep overbite and open bite, skeletal linear measurements were more significant than dentoalveolar linear measurements. SN-MP angle, SN-OP angle, PP-OP angle and Xi angle (ANS-Xi-Pog) were significant in anglular measurements. 2. Upper posterior facial height (SE-PNS), upper anterior alveolar height, lower posterior alveolar height, lower posterior alveolar height/lower anterior alveolar height and SN-PP angle were non significant between deep overbite and open bite. 3 The most significant items between deep overbite and open bite were lower anterior facial height (ANS-ME) and SN-MP angle. 4. Correlation coefficients of angular measurements were higher in deep overbite, while that of linear measurement total anterior facial height (N-ME) was higher in open bite. 5. In the multiple regression equation, significant variables were total anterior facial height (N-ME), lower anterior alveolar height, upper anterior alveolar height, upper posterior alveolar height, Xi angle (ANS-Xi-Pog) and ramus height (AR-Go) in deep overbite, and total anterior facial height (N-Me), lower anterior alveolar height, ramus height (AR-Go), lower posterior alveolar height, PP-MP angle and upper posterior facial height (SE-PNS) in open bite.

  • PDF

The Vortical Flow Field of Delta Wing with Leading Edge Extension

  • Lee, Ki-Young;Sohn, Myong-Hwan
    • Journal of Mechanical Science and Technology
    • /
    • v.17 no.6
    • /
    • pp.914-924
    • /
    • 2003
  • The interaction and breakdown of vortices over the Leading Edge Extension (LEX) - Delta wing configuration has been investigated through wing-surface pressure measurements, the off-surface flow visualization, and 5-hole probe measurements of the wing wake section. The description focused on analyzing the interaction and the breakdown of vortices depending on the angle of attack and the sideslip angle. The Effect of angle of attack and sideslip angle on the aerodynamic load characteristics of the model is also presented. The sideslip angle was found to be a very influential parameter of the vortex flow over the LEX-delta wing configuration. The introduction of LEX vortex stabilized the vortex flow, and delayed the vortex breakdown up to a higher angle of attack. The vortex interaction and breakdown was promoted on the windward side, whereas it was suppressed on the leeward side.

Reliability and Validity of Measurement Using Smart Phone-Based Goniometer on Pelvic Tilting Angle in Standing and Sitting Position

  • Ha, Sung-Min;Jeon, In-Cheol
    • The Journal of Korean Physical Therapy
    • /
    • v.31 no.1
    • /
    • pp.35-39
    • /
    • 2019
  • Purpose: The purpose of this study was to assess the intra-rater and inter-rater reliability and validity of pelvic tilting angle measurements using a smart phone-based inclinometer (Clino) compared to a palpation meter (PALM) in the standing and sitting position. This study used an interchangeable method with Clino to measure the pelvic tilting angle in the standing and sitting positions. Methods: Twenty healthy subjects were recruited. Measurements of the pelvic tilting angle in the standing and sitting positions were obtained by two examiners using the Clino and PALM. A resting session was conducted 10 minutes later to assess the intra and inter rater reliability. To assess validity of the measurement using Clino, a PALM was used as the gold standard. The intra-class correlation coefficient (ICC) was used to determine the intra and inter rater reliability of Clino and a PALM. To assess the validity, the Pearson correlation coefficients were used for two measurement techniques to measure the pelvic tilting angle in the standing and sitting positions. The statistical significance was set to ${\alpha}=0.05$. Results: Measurements of the pelvic tilt had high inter-rater reliability in the standing (ICC=0.82) and sitting (ICC=0.88) positions using Clino and intra-rater reliability in the standing (ICC=0.87) and sitting (ICC=0.91) positions using Clino. Measurements of the pelvic tilt had high validity by a comparison of PALM and Clino in the standing (r=0.83) and sitting (r=0.89) positions (p<0.05). Conclusion: The use of Clino can be recommended as a tool to replace the PALM and measure the pelvic tilt angle in the standing and sitting positions while maintaining the clinical reliability and validity.