• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.698-704
• /
• 2007

Articulated vehicles which have a pivoting joint allowing the vehicle to rotate more easily are difficult to turn the curves because of their long length. In order to review operational safety, turning characteristics related to geometric design should be investigated when articulated vehicles run on the road which can be interfered with other vehicles. The vehicles to review the turning characteristics are the normal articulated bus in Seoul with FWS(front wheel steering) and new bimodal tram with AWS(all wheel steering). Steering characteristics and geometric design were investigated such as turning radius, offtracking, swept path width and swingout. The results were reviewed with respect to the standards of vehicle safety and road design.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.13-19
• /
• 2007

This study is to establish design method and evaluation technology for drive system appropriate to articulated vehicles. The transmission system of articulated vehicles serves in the other condition compared with those of commercial vehicles, namely, they have to transmit high power to run and they have to make maximum use of the limited space. This paper reports the reviews and results of the design and evaluation method for driving gear unit of articulated vehicles and discusses various design items and methods about assembly and parts of driving gear unit.

• 한국철도학회논문집
• /
• 제11권3호
• /
• pp.225-232
• /
• 2008

축간거리가 긴 트럭이나 굴절차량과 같이 차량이 길이가 길고 2량 이상 편성된 차량은 회전반경을 줄여 원활하게 곡선을 주행할 수 있도록 전 차륜 조향방식(AWS)을 적용한다. 굴절차량에 도입된 방법은 네덜란드 APTS사의 Phileas 차량이 유일하며 자동으로 운전하기 위한 제어방법에 대한 논문은 발표되었지만 수동으로 조향되어 운전되는 경우에 대한 알고리즘은 소개되거나 공개되어지지 않았다. 따라서 본 연구에서 네덜란드의 APTS사의 차량에 대한 수동운전시의 조향장치 특성을 분석하고 새로운 알고리즘을 제안하였다. 또한 개발된 알고리즘을 상용 동역학 프로그램인 ADAMS를 이용하여 적용성을 알아보았다.

• 제어로봇시스템학회논문지
• /
• 제18권7호
• /
• pp.688-698
• /
• 2012

This paper deals with ROLSO (Reduced Order Luenberger State Observer) design to prevent jackknifing phenomenon of articulated vehicles consisting of the tractor and semi-trailer by using GPS. In addition, by applying the regulator system using ROLSO feedback system, simulation's result presents that articulated vehicle's states are stabilized than the human's PR time (Preception Response time) rapidly. This simulation verifies that the automatic control of articulated vehicle's can be applied for the accident prevention for the time that the driver is unable to manage with the sudden accident. For this simulation, by using the equation of planar motion, the modeling of the articulated vehicle was performed. This modeling was expressed in the state space model. And FOLSO (Full Order Luenberger State Observer), ROLSO were designed by using the state space model of an articulated vehicle's dynamics.

• 동력기계공학회지
• /
• 제11권2호
• /
• pp.58-63
• /
• 2007

Vehicular safety and occupant injury have been of considerable interest to the public. The dynamic response of an articulated vehicle is different from that of single body vehicle due to its geometric and inertia properties. Articulated vehicles have the tendency to jackknife if they lose driving safety. Influence of factors for driving safety of an articulated vehicle(Tractor-Semitrailers) has been analysed by the EDVTS, a kinetic analysis program for an articulated vehicle. EDVTS permits an analyst to investigate the effect of many variables in a short period of time, and enables to obtain an accurate explanation of driving safety. The factors used in the analysis include the load, friction coefficient, tire flat, increase of braking force, and trailer geometry. Based on the results, the articulation angle and driving safety were influenced remarkably by the load, coefficient of friction, increase of braking force. However, trailer geometry, such as length and width, did not affect articulation angle and driving safety

• 한국철도학회논문집
• /
• 제17권5호
• /
• pp.336-341
• /
• 2014

기차나 군용 트럭 등에 이용되던 굴절차량이 승객의 대량 수송을 위하여 일반 도로에 적용이 검토되고 있다. 레일을 따라가지 않고 일반 도로에서 주행하는 굴절차량은 회전반경, 차량 선회 폭, 이탈궤적, 스윙아웃등 다양한 제어 요소를 갖는다. 현재 승객 수송을 목적으로 제작되는 굴절차량은 각 바퀴에 하나의 모터를 장착하고 구동하는 독립 구동 방식을 채택하고 있으며, 각 바퀴의 독립 제어를 통하여 차량의 빠르고 정확한 자세제어가 가능하다. 이 논문에서는 여러 제어 요소 중 굴절차량의 최초 목적인 회전반경 감소를 위한 토크 분배 알고리즘을 제안하고, 시뮬레이션을 통하여 회전 반경이 감소함을 검증하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.421-428
• /
• 1998

Sensitivity analysis of suspension elements of an articulated bogie for light railway vehicles is presented. The ride, stability and safety are used as dynamic performance index. Suspension elements of 10 and a conicity of wheel are used as design variables, To analyze sensitivity of design variables, the railway vehicle dynamics analysis program AGEM is used. The results shows that the secondary suspension elements have a strong effect on ride and the primary suspension elements have a moderate effect on ride. Conicity of wheel has a strong effect on the stability, The safety is not effected by all the design variables.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 춘계학술대회 논문집
• /
• pp.1118-1123
• /
• 2006

• Journal of Biosystems Engineering
• /
• 제21권1호
• /
• pp.34-43
• /
• 1996

The present pesticide application technology widely used with a power sprayer in Korea is assessed as the problem awaiting solution in the point of view of its ineffectiveness, inefficiency, and environmental contamination. As one approach to get rid of these problems, the boom spraying with ultra-low volume and precision application technology has been recommended. The study was undertaken to investigate plants damages incurred by the self-propelled boom-sprayer vehicle, to develop the design criteria of vehicle wheel, and to compare plant damages caused by the front wheel steering vehicle, the 4-wheel drive vehicle and the articulated vehicle, by the computer simulation. The experiment showed that the amount of damaged plants incurred by the self-propelled boom sprayer were about 0.29% in average in the field size of 100m$\times$50m(0.5ha), about 60~80% of which recovering while growing. The recommandable wheel size was analyzed to be 70~100cm in diameter, 8~15cm in width from the vehicle-plant-soil relationship. The simulation on damaged plants anticipated to be incurred by various steering vehicles showed that the smaller the turning radius, the lesser the damaged plants within its range of 3~5m. Average plant damage rate by the front wheel steering vehicle, the 4-wheel drive vehicle and articulated vehicle was relatively assessed to be 2 : 1.8 : 1.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.201-207
• /
• 2003

Sensitivity analysis of suspension elements of an articulated bogie for light railway vehicles is presented. The ride, stability and safety are used as dynamic performance indices. Suspension elements of 10 and a conicity of wheel are used as design variables. To analyze sensitivity of design variables. the railway vehicle dynamics analysis program AGEM is used. The results show that the secondary suspension elements have a strong effect on ride and the primary suspension elements have a moderate effect on ride. Conicity of wheel has a strong effect on the stability. The safety is not effected by all the design variables.