• Journal of the Korea Society of Computer and Information
• /
• v.25 no.3
• /
• pp.89-96
• /
• 2020

Solar lamp systems may not operate normally in the event of some system or controller failure due to internal or external factors, in which case secondary problems occur, which may cost the system recovery. Thus, when these errors occur, a technology is needed to recover to the state it was in before the failure occurred and to enable re-execution. This paper designs and implements a system that can recover the state of the system to the state prior to the time of the error by using the Watchdog Timer within the controller if a software error has occurred inside the system, and it also proposes a technology to reset and re-execution the system through a separate reset circuit in the event of hardware failure. The proposed system provides stable operation, maintenance cost reduction and reliability of the solar lamp system by enabling the system to operate semi-permanently without external support by utilizing the automatic recovery and automatic reset function for errors that occur in the operation of the solar lamp system. In addition, it can be applied to maintain the system's constancy by utilizing the self-operation, diagnosis and recovery functions required in various high reliability applications.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.07a
• /
• pp.261-262
• /
• 2019

컨트롤러에 의해서 동작 및 운영되는 시스템들은 시스템의 내외부적인 요인으로 고장이 발생한 경우 정상적으로 작동할 수 없으며, 이 경우 2차 문제 발생 및 시스템 복구비용이 요구된다. 본 논문에서는 시스템 내부의 소프트웨어 오류 발생 시 컨트롤러 내의 감시 타이머를 사용하여 다운타임 시점 이전의 상태로 복구하는 알고리즘과, 하드웨어 오류의 경우 별도의 자동 리셋 기능을 통하여 시스템을 재설정하고 재 동작이 가능하도록 하는 기능을 구현한다. 제안 시스템은 시스템이 외부 지원 없이 자체적으로 반영구적인 동작이 가능하도록 함으로써, 시스템의 안정성과 신뢰성을 제공하고 운영 및 관리비용의 절감 효과를 제공한다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.147-150
• /
• 2012

This study restoration worker for dispersion relay in R-Type fire alarm system. Restoration worker very good instrument for an fire system inspector. When inspector check for fire system someone need reset for fir system to normal state. This chain of action is frequent and troublesome. In this case, If we can automatic reset for fire system it's restoration worker. This paper settlement on the problem for reset fire system. Design, make grabber for restoration worker. The test offer proof possibility restoration worker.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.1-9
• /
• 2010

This paper summarizes an education and training system for the auto-reclosing of power transmission system using a real time digital simulator. The system is developed to understand the principle of reclosing and the sequence of automatic reclosing schemes, and practice the effects of reclosing actions to power system in real-time simulator. This study is concentrated into the following two parts. One is the development of real time education and training system of automatic reclosing schemes. For this, we use the RTDS(real time digital simulator) and the actual digital protective relay. The mathematical relay model of RTDS and the actual distance relay which is equipped automatic reclosing function are also used. The other is the user friendly interface between trainee and trainer. The various interface displays are used for user handing and result display. The conditions of automatic reclosing which is a number of reclosing, reclosing dead time, reset time, and so on, can be changed by the user interface panel. A number of scenario cases are reserved for the education and training. Through the test, we verified that the proposed system can be effectively used to accomplish the education and training of automatic reclosing.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.41-49
• /
• 2011

The automatic fire detection system is an important facility installed with focusing on minimizing the damage from a fire. This paper presents in the followings as the methods to reduce the false alarm of the automatic fire detection system; first, to prepare for legal standard so that revised legal standard can be applied to the fire fighting property prior to revision; second, to introduce the performance based fire detection protection design in the law based fire protection design; third, to maintain the wiring of worn-out detector; forth, to introduce an evaluation system to the education for the fire warden; fifth, to extend the standard of MTBF(meantime between failure) of the detector; sixth, to extend of installing the analog type detector; seventh, to improve the structure of reset switch.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.246-247
• /
• 2015

Type of Automatic Voltage Regulator (AVR) can be divided into Analog and Digital Type. Automatic Voltage Regulator (AVR) of the synchronous generators of the brushless type are to be reduced to the voltage fluctuation on the basis of the total load. The PID control method is a general control technique is commonly widely used. In this study, the control target parameter iPID does not reset the parameters of the controller for the variable (Intelligent PID) using the controller synchronous generator Digital automatic voltage to you like all applied to the adjusting device (AVR) the voltage change is small, improved responsiveness was studied in this controller.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.4
• /
• pp.162-166
• /
• 2018

Companies that use automatic feeder systems use multiple feeders in close proximity to each other for mass production. Unlike when the feeder is used independently, it does not oscillate to a value that is set to offset or freeze due to symbiosis caused by asynchronous forces hitting each other. This may result in the shipment being damaged by hitting each other or thrown to one side, preventing the transport from being moved to the next process. Whenever an unstable resonance occurs, the operator must reset the value of each feed controller or operate it several times. To address these problems, this paper proposes synchronization algorithm suitable for feed controllers using multiple units and tests are used to confirm performance improvements.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.65.2-65
• /
• 2001

There are not only lots of controllers such as UMC(Unit Master Controller), BMC(Boiler Master Controller), Fuel Flow controller, Air flow controller, Feed water flow controller, S/H R/H Temperature controller and so on, but also compensation controller such as BTU compensator, Fuel/Water ratio controller and O2 Co controller to take automatic control in the super critical once through boiler. It is important to make complete automation of boiler to use the compensation controller like BTU compensator. For example, In case of some boiler condition, operator has to change combustion parameter for changing the coal, on the contrary BTU compensator can calculate set value of the fuel flow and reset the fuel flow demand by itself. This paper shows us the logic and instruction regarding compensation controller of boiler that can be operated automatically.

• Journal of Mechanical Science and Technology
• /
• v.14 no.4
• /
• pp.369-379
• /
• 2000

In industrial production-distribution systems, production and purchasing rates, associated inventories, and sales are very critical for the profits of each component in the system. The objective of this study is to investigate an effective information control scheme for a production -distribution system by automatic feedback control techniques. In this work, a dynamic control scheme that has an integrated -error with state-feedback and filtering (ISFF) is proposed as a new algorithm for a dynamic controller. Generalized formulations of the dynamic control are proposed in the continuous-time and discrete-time cases. A methodology for an evaluation of ISFF controller gains using the eigen structure property is presented. When an upper-limit is imposed on the production capability by available factory space and capital equipment, supervisory control is provided to avoid integrator-windup and deterioration of system performance.

• Journal of Advanced Navigation Technology
• /
• v.21 no.4
• /
• pp.413-421
• /
• 2017

In this paper, we designed and fabricated a compact UHF receive module for efficient operation such as tactical and operation situation, target location information confirmation, target reset using Link-K(Korean joint tactical data link system). And the effect of target reset was analyzed by simulation. The designed module consists of UHF(ultra high frequency) receiver section, control section, and power distribution section. The UHF receiver section performs frequency down conversion, filtering and automatic gain control, etc. The control section demodulates frequency down-converted signals, extracts information, and performs external interworking. The power distribution section supplies external power, generates and supplies the power required by each section. The fabricated module was dimension of $105{\times}105{\times}80mm$ and weighed 1.10 kg and The receiving distance is more than 50 km.