• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.29-37
• /
• 2007

In the automatic operation of an urban rail vehicle, a conventional PID control algorithm is applied to run the vehicle between stations within time limit and jerk limit. But the energy consumption in the automatic operation is much higher than in the manual operation. In this study, the optimal control algorithm for automatic operation is proposed to minimize energy consumption, which satisfies automatic operation for the urban rail vehicle, compared with the conventional PID control algorithm.

• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.154-160
• /
• 2000

The automatic/driverless operation which are great important techniques in metro railway are required to increase higher safety, greater reliability, and transport capacity. To satisfy such demands, we must have the system design and testing technique for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control and Monitoring System), ATO(Automatic Train Operation), ATC(Automatic Train Control), and TWC(Train to Wayside Communication). These sub-systems must be interfacing with not only each others but also the signal system on the ground. We tested the train control system on Test line that has been developed on the basis of the standardized type EMU for korea railway systems. This test line which is located in Sangju, have been constructed for testing 7 ＆ 8 line of Seoul Metro railway.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.122-122
• /
• 2000

Polishing work of a free-curved surface die demands simple and repetitive operations but requires a considerable amount of time for high precision. In out previous study, to reduce the polishing time and solve the problem of the shortage of skilled workers, the automatic polishing system was developed. However, in the polishing process of die, workers have to stay still in factory to monitor the polishing process for a long time in the poor environment. Therefore, this study proposes the remote operation and monitoring system of the automatic polishing robot. The developing system offer worker monitoring functions and teleoperating functions, as following: system state check, manual manipulation mode, automatic mode, manual teaching mode, automatic teaching mode, simulation by virtual manufacturing device. And automatic teaching system is developed to easily obtain a teaching data.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1100-1107
• /
• 2011

The light-rail system which is recently being built in Korea is a train control system based on driverless operation, and the train control system for urban maglev train under construction at the moment in Youngjong-Do, Incheon is pushed ahead based on driverless operation. In this paper, it compares train operation cases with manned operation and unmanned operation to examine system requirements for unmanned driving on train and detects system requirements of automatic train operation device for unmanned operation by analyzing unmanned operation cases which are currently operating or planed project and also introduces automatic train operation of urban maglev train and verifies whether the system for unmanned driving meets the requirements.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.107-112
• /
• 2005

When it comes to automatic operation control of urban rail vehicle, a PID control makes it run between stations within the fixed time and stop exactly at the stop sign on the platform, satisfying jerk limit. An optimal control is applied to automatic operation performance control to minimize energy consumption while the urban rail vehicle satisfies automatic operation condition on this paper. The control performance in terms of energy minimization along with the constraint on precision stops is compared between the optimal control and PID control.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.255-261
• /
• 1998

The train automatic operation control system is an on-board train control system that is widely adopted in modern rapid transit systems. The control system consists of TCMS(Train Control and Monitoring System), ATC(Automatic Train Control), ATO(Automatic Train Operation) and TWC(Train to wayside communication) in the train and wayside facilities. The functions of the system is to regulate train riding comfort, to service limited speed and smoothness during start, acceleration, constant speed travel, and fixed point parking under the corresponding commands. The paper describes the simulation model of the train automatic operation control of subway system, configuration of simulator hardware and software and operational algorithms.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.172-179
• /
• 2000

The automatic/driverless operation which are great important techniques in metro railway are required to increase higher safety, greater reliability, and transport capacity. To satisfy such demands, we must have the system design iかd testing technique for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control md Monitoring System), ATO(Automatic train Operation), ATC(Automatic train Control), and TWC(Train to wayside communication). These sub-systems must be interfacing with not only each others but also the signal system on the ground. We tested the train control system on Test line that has been developed on the basis of the standardized type EMU for korea railway systems. This test line which is located in Sangju, have been constructed for testing 7 ＆ 8 line of Seoul Metro railway.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2474-2476
• /
• 2003

An algorithm was embodied to automatic pump operation Pattern for remote control located in 60 km far. This automation pattern included least cost operation, peak load time response, pump operation time balancing etc. It was programmed four kind of operation mode as following; normal operation nude, before peak load time nude, peak load time operation, after peak load time operation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.501-506
• /
• 1988

This paper describes an experimental system for automatic robot programming, The SNU-ARPS (Seoul National University Automatic Robot Programming System). The SNU-ARPS generates executable robot programs for pick and place operation and some simple mechanical assembly tasks by menudriven dialog. It is intended to enable the user to concentrate on the overall operation sequence instead of the knowledge regarding the details of robot languages. To convert task specifications into manipulator motions, the SNU-ARPS uses an internal representation of the world. This representation initially consists of geometric database from CAD system and is updated at each operation step to reflect the state changes of the world.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1457-1459
• /
• 2000

The ATO(Automatic Train Operation System) system is equipment for automatic and driverless operation of electric train with minimum control of operator. In this paper, we made ATO system with national technic and passed type test. We are convinced of reliability and safety of the ATO system on the seoul metro 7 line.