• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.616-618
• /
• 2008

The objective of this study is to prepare the plan for managing construction noise effectively and solving the popular enmity from construction noise reasonably. In order to carry out this purpose, it covers the efficient improvement plan for installing and managing the automatically noise-measuring system which shows the advantage for construction noise management and popular enmity solution due to construction noise.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.968-974
• /
• 2004

Automakers have been forcing their suppliers to guarantee qualities of parts. Then, the suppliers have met the fundamental quality requirements such as dimensions and functions, but they could not sufficiently satisfy the automakers' noise requirements yet because automatic noise inspection systems were little successfully adopted In mass-production lines. This study tried to develop a system for automatically checking noise radiated from a rotating engine part and filtering parts emitting noise higher than criteria: the upper limits of a overall noise level or a noise spectrum. A commercial noise measurement system was used for measuring noise, and then the noise data was transmitted to a governing program through OLE(object, linking and embedding) functions. The governing program, belonging to a total noise inspection system managed the noise measurement and analysis. This system was successfully adapted for distinguishing bad parts according to the noise criteria.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.172-179
• /
• 2001

Experimental studies have been carried out to find out the characteristics of the heat transfer, combustion emission and noise in the boilers without any extra firing zone for complete combustion of fuel. For the experiments a burner of premixed type and some heat exchangers were designed and manufactured. Also test facilities including a data acquisition system and various measuring devices were set up in order to measure automatically the various temperatures and flow rates of water and combustion gas. Various experiments were performed to find out the heat transfer characteristics as well as combustion emission and noise. In general, the burner which has uniform holes in the burner nozzle plate generates big combustion noise . whistling. The noise reduction method is discussed in this study. Many experimental data such as noise level, the amount of pollutant emission and heat transfer rate for different combination of heat exchangers are given as comparison bases for numerical studies.

• 한국소음진동공학회논문집
• /
• 제15권11호
• /
• pp.1241-1247
• /
• 2005

An automation of primary vibration calibration system was developed and tested. Using GPIB interface, the console PC make the control of equipments, signal collecting and save measuring results automatically by the instructions in the program by Visual Basic. Several trials of automatic calibration for the accelerometer(ENDEVCO 2270) using this developed system give the reliable results.

• 한국의학물리학회지:의학물리
• /
• 제13권3호
• /
• pp.156-162
• /
• 2002

본 연구에서는 뇌파 신호를 측정할 수 있는 고정밀도의 뇌파측정시스템을 제작하였다. 전치증폭기는 분리증폭기의 방식으로 잡음제거 능력을 향상하였으며, 높은 사용자 안전도를 갖도록 제작하였다. 제작된 뇌파측정시스템은 주파수 대역별로 알파, 베타, 세타로 자동으로 분류될 수 있도록 A/D 변환하였다. 변환된 데이터는 DSP를 이용하여 실시간으로 FFT처리를 하였다. 실험은 현재 병력이 없고 건강 상태가 양호한 만 20세에서 26세까지의 학생을 대상으로 실시하였다. 외부의 물리적인 자극이 뇌파에 미치는 영향을 조사하기 위하여, 현재 시판되고 있는 뇌파 자극기인 MS제품을 이용하여 시각과 청각의 두 상태로 외부자극을 주고, 그 반응을 측정하여 비교하였다. 피검자의 감성평가 측정결과 본 연구에서 제작한 뇌파측정기가 유효함을 확인하였으며, 심리적인 상태변화를 조사할 수 있었다.

• 품질경영학회지
• /
• 제30권3호
• /
• pp.111-119
• /
• 2002

Gears are essential elements for mechanical power transmission. Geometric precision is the main factor for characterizing gear grade and qualify. Gear pitch is one of the crucial measurements, which is defined as a distance between two adjacent gear teeth. It is well-known that variability in gear pitches may causes wear-out and vibration noise. Therefore maintaining pitch errors at a low level plays a key role in assuring the gear quality to customers. This paper is concerned with a case study, which presents a computerized system for Inspecting pitch errors in a gear machining process. This system consists of a PC and window-based programs. Although the start and stop is manually accomplished, the process of measuring and analyzing pitch data is automatically conducted in this system. Our purpose lies in reducing inspection cost and time as well as Increasing test reliability. Its operation is briefly illustrated by example. Sometimes a strong autocorrelation is observed from pitch data. We also discuss a process monitoring scheme taking account of autocorrelations.

• 한국기계가공학회지
• /
• 제15권1호
• /
• pp.103-109
• /
• 2016

The performance of a multi-head, computerized combination scaling system to automatically identify a group of agricultural products having a total weight within the target range has been optimized to reduce the package cycle time of the merchandise. First, the structure of the scale was modified to enable faster measurement by enhancing the dynamic stability during the process. Second, the high frequency noise in the measured signal was eliminated by a high frequency filter to provide more accurate weight data. Finally, the algorithm to identify a group of products with a total weight within the target range was modified to enable a user to select an optimal number of scales. According to the experimental verifications, this modified system reduced the package cycle time significantly and also was accurate in measuring the total weight of the selected products.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.207-212
• /
• 1997

In estimating the formability of sheet metal, the stereo vision system contributes the accuracy of strain of sheet metal, the convenience in measuring the strain of sheet metal, and the handiness in preparing the forming limit diagram by calculating the 3D values and strain of sheet metal. The algorithm has been developed so that the 3D-coordinate values of sheet metal could be calculated by image processing which is composed of camera calibration, and the stereo matching of images in two viewpoints. By comparing with experiments, the possibility and the convenience of algorithm has been verified, which could calculate the 3D-coordinate values of sheet metal automatically by using the preprocessing of the original image of sheet metal, which had the noise before adjusting the camera calibration and the stereo matching algorithm.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.592-595
• /
• 2008

본 논문은 모바일 TFT-LCD 구동 집 회로와 임베디드 소프트웨어를 이용한 자동 화질 레지스터 최적화시스템을 제안한다. 이러한 시스템은 LCD모듈의 중요한 화질 평가 요소인 평균 감마 오차, 감마 조정 시간, 플리커 잡음 및 명암비 등을 최적화하기 위해 모바일 LCD구동 집적회로 내의 감마조정 레지스터들과 전압 설정 레지스터 들을 자동적으로 제어한다. 개발된 알고리즘과 임베디드 소프트웨어는 거의 모든 유형의 LCD모듈에 적용 가능하다. 개발된 화질 최적화 시스템은 측정 대상이 되는 모듈 (MUT, LCD 모듈), 제어 프로그램, 휘도 측정용 멀티미디어 디스플레이 측정기 및 인터페이스용 제어 보드로 구성되어 있다. 제어 보드는 DSP와 FPGA로 구성 되 어 있고, RGB 및 CPU 인터페이스를 지원한다.

• 대한전자공학회논문지TC
• /
• 제43권10호
• /
• pp.27-34
• /
• 2006

본 논문은 3[Cm] 이내의 Tag-to-Reader 잡음 공간에서도 기계 ID 인식을 정확하게 보장하는 초소형($1.4{\times}2.8[Cm^2]$) 13.56[MHz] RFID Reader를 구현하였다. 그 RFID 시스템의 작동을 위하여, 먼저, 본 논문은 13.56[MHz] RFID Air Interface ISO/IEC 규격을 따르는 전파 전파에서 후방 산란의 페이딩 모델과 Loop Antenna를 설계하였고, 다음으로 초소형 RFID RF 이슈들을 측정하고 분석하여 자동으로 경로 선택된 RF 스위칭 회로와 펌웨어의 작동 관계를 제안하였으며, 끝으로, 초소형 Reader의 본체로서 국제표준규격 ISO/IEC 18000-3이 정의한 13.56[MHz] RFID 신호의 반송과 동시에 $1{\sim}2$개 기계 ID 정보의 추출과 오류 예방을 위하여 제작된 DSP(Digital Signal Processor) 보드와 소프트웨어 기능을 제시하였다.