• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1652-1657
• /
• 2007

Designer must cope with frequent changes in geometric information of automobile suspension module in the early stage of the design process. The authors developed the PSG(Parametric Set Generator) to create parametric models and to change geometric information concerning the lower arm, which is one of the important parts of the automobile suspension module. CAD models provided from the PSG can be utilized to assess fatigue durability via the FE modeling support system. This system provides easy and fast FE-modeling for a static and durability analysis of the lower arm. The PSG and the FE modeling support system are integrated using the e-engineering framework based on the JADE platform. In this study, a durability analysis as a case study for the lower arm manufactured at H company is performed, and the efficiency obtained is discussed.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1320-1325
• /
• 2008

In the manufacture of automobile suspension modules at a company as parts supplier, the design process includes the detail design and the design modification via structural and fatigue durability analyses considering PoF(physics of failure) of their weldments that are repeated more than four times sequentially. The approval of the design and the release of final drawings follows. For the suspension modules, e.g. control arms and cross member, the man-hours per worker required in the process outlined above can reach as high as 1,414hours. Application of the developed integrated design system can reduce the man-hours of 1,004. In comparison with the conventional design process, this integrated design system reduces the required time by about 40%. If expense is taken into account, a savings of approximately $192,000 is estimated, assuming the design process accounts for 1.5% of total sales for the parts supplier

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.1
• /
• pp.49-56
• /
• 2006

In this study, the modeling support system was developed which can make easy and fast FE-modeling and verify the results of static and durability analysis for the lower arm, one of the important parts in automobile suspension module. It took into account of the whole complicated design processes verifying the durability coefficients evaluated by fatigue analysis, which should be used to satisfy a design criteria. To guide the FE-modeling the drive page was constructed by using HTML and XML, which was based on expert's know-hows. It is able to integrate the processes to design the lower arm in practice, so that the standardization of its FE-Modeling is achieved, consequently. The 3 dimensional CAD's geometrical data were changed automatically into pre-defined shell elements under the concept of mesh-offset technique, and then welding elements were treated to connect between target and basic surfaces constructed by the shell elements. This system has also a user interface to control boundary and load ing conditions applied in performing of the static and durability analysis, in which many load cases can be applied simply with the MPCs driven by just few mouse clicks. These were implemented on the platform of MSC.Patran and utilized ANSYS, MSC.Nastran and MSC.Fatigue as the solver of the analysis performed. The developed system brings not only significant decreasing of man-hours required in FE-modeling process, but also obtaining of satisfied qualities in analyzed results. It will be integrated in a part of virtual prototyping module of the developing e-engineering framework.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.150-150
• /
• 2016

Mankind is enjoying a great convenience of their life by the rapid growth of secondary industry since the Industrial Revolution and it is possible due to the invention of huge power such as engine. The automobile which plays the important role of industrial development and human movement is powered by the Engine Module, and especially Diesel engine is widely used because of mechanical durability and energy efficiency. The main work mechanism of the Diesel engine is composed of inhalation of the organic material (coal, oil, etc.), combustion, explosion and exhaust Cycle process then the carbon compound emissions during the last exhaust process are essential which is known as the major causes of air pollution issues in recent years. In particular, COx, called carbon oxide compound which is composed of a very small size of the particles from several ten to hundred nano meter and they exist as a suspension in the atmosphere. These Diesel particles can be accumulated at the respiratory organs and cause many serious diseases. In order to compensate for the weak point of such a Diesel Engine, the DPF(Diesel Particulate Filter) post-cleaning equipment has been used and it mainly consists of ceramic materials(SiC, Cordierite etc) because of the necessity for the engine system durability on the exposure of high temperature, high pressure and chemical harsh environmental. Ceramic Material filter, but it remains a lot of problems yet, such as limitations of collecting very small particles below micro size, high cost due to difficulties of manufacturing process and low fuel consumption efficiency due to back pressure increase by the small pore structure. This study is to test the possibility of new structure by direct infiltration of SiC Whisker on Carbon felt as the next generation filter and this new filter is expected to improve the above various problems of the Ceramic DPF currently in use and reduction of the cost simultaneously. In this experiment, non-catalytic VS CVD (Vapor-Solid Chemical Vaporized Deposition) system was adopted to keep high mechanical properties of SiC and MTS (Methyl-Trichloro-Silane) gas used as source and H2 gas used as dilute gas. From this, the suitable whisker growth for high performance filter was observed depending on each deposition conditions change (input gas ratio, temperature, mass flow rate etc.).