• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.8
• /
• pp.1297-1302
• /
• 2017

Recently, SRMs are used in automobiles for power assistant steering, accessory motion control and traction drives. Especially in the motion control and traction drives, safety and efficiency are of paramount importance. The paper describes the essential elements faced in designing and constructing driving circuits for a switched reluctance motor for automobiles. An important factor in the selection of a motor and a drive for industrial application is the cost. The switched reluctance motor(SRM) is a simple, low-cost, and robust motor suitable for variable-speed as well as servo-type applications. With relatively simple converter and control requirements, the SRM is gaining an increasing attention in the drive industry. This paper presents a modified C-dump converter for Switched Reluctance Motor (SRM) machine application in the cooling system of automobiles. The experiments are performed to verify the capability of applicate control method on 6/4 salient type SRM.

• Science of Emotion and Sensibility
• /
• v.21 no.1
• /
• pp.91-98
• /
• 2018

The purpose of this study is to reveal concrete evidence on how aesthetic preference is applied in product design by countries. Since the 19th century, the proportion has been examined various times, and the conclusions consistently showed the strong preference for the golden ratio (1:1.618). However, previous studies are mainly focused on western products that were designed by western designers, so when the same experiment conducted for the first time in Asia with the question of 'Is the Asian subjects also likes the golden ratio?', the result clearly revealed that Korean subjects have a significant preference for the root ratio (1:1.414) and perfect square (1:1). It demonstrates that proportion preference might be different by countries, and it also influences on everyday products. Moreover, there is not enough evidence of Asian product proportions. For this reason, this study will strive to expand the knowledge on Asian aesthetic preference by focusing on Japanese automobiles that were designed and produced in Japan. 55 iconic Japanese automobiles were analyzed for proportion and compared with 50 iconic German automobiles. The result shows that Japanese automobiles have a shorter length of 7:10 (1:1.414) ratio than German automobiles with 13:23 (1:1.769) ratio. This result proves that there is the difference in preference for the proportion of Japan and Germany, and it has already influenced on automobile proportions. This result has a strong value that finding the most appropriate proportion of automotive design is a major issue in new product development, so this can be adapted to various fields of the design process where strong cultural value exists.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.4
• /
• pp.69-73
• /
• 2001

Due to the rapid increase of automobiles and daily driving distances, air pollution by automobiles is still dominant problem of large city in spite of strict emission refutation and development of reduction technologies. Among the air pollution resources of automobile , industry. electricity generation and heating. automobile keeps 51% of total nationwide air pollution in 1998 and this proportion Is increasing in large cities from 65% to 85%. To reduce these air pollution. catalytic converter and electronic engine control, exhaust gas re-circulation and evaporative emission control system have continuously developed and applied to automobiles since 1987. Also strong emission standards and emission durability warranty have enforced and monitored annually by sampling several vehicle models. But technologies and regulations are incomplete, driver should participate in reducing air pollution for himself by planning driving, avoiding unnecessary idle and air conditioning, keeping periodic maintenance and using mass transportation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.196-202
• /
• 2003

The object of this article is to study the plausibility of applying human voice warning system to automobiles. Human voice is considered the best tool for warning system in automobiles. For the purpose of comprehending the specific characteristics of relation between noises and properties of the automobiles indoors and voice warning system researcher performed FRF test in order to examine the characteristics of voice output, and FEM simulation to learn the specific properties of the car indoors. And furthermore, surveyed the quality of voice output, using the written inquiry to examine members. The result of the study shows that it is much possible to apply voice warning system to automobiles.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.3
• /
• pp.61-66
• /
• 2006

Awkward work postures in workshop highly affect on work-related musculoskeletal disorders(WMSDs). Especially, in automobiles assembly process, these awkward work postures of workers may cause serious injury and illness. This study is to compare the performance among the evaluation tools which can measure the work-loads caused by the awkward work postures in automobiles assemble process. RULA, REBA and TVAL(Toyota Verification of Assembly Line) are used as the evaluation tools. The 85 jobs selected in the automobiles assembly process are applied to the three tools and their performances are analyzed after the evaluation of the work-load in each job. Through various measures of performance such as statistical test, DUNCAN test, regression test etc., the tendencies and characteristics among them are analyzed in detail.

• Korean Journal of Materials Research
• /
• v.22 no.1
• /
• pp.29-34
• /
• 2012

The hydrogen embrittlement of high strength steel for automobiles was evaluated by small punch (SP) test. The test specimens were fabricated to be 5 series, having various chemical compositions according to the processes of heat treatment and working. Hydrogen charging was electrochemically conducted for each specimen with varying of current density and charging time. It was shown that the SP energy and the maximum load decreased with increasing hydrogen charging time in every specimen. SEM investigation results for the hydrogen containing samples showed that the fracture behavior was a mixed fracture mode having 50% dimples and 50% cleavages. However, the fracture mode of specimens with charging hydrogen changed gradually to the brittle fracture mode, compared to the mode of other materials. All sizes and numbers of dimples decreased with increasing hydrogen charging time. These results indicate that hydrogen embrittlement is the major cause of fracture for high strength steels for automobiles; also, it is shown that the small punch test is a valuable test method for hydrogen embrittlement of high strength sheet steels for automobiles.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.1
• /
• pp.25-32
• /
• 2007

Automobile manufacturing companies should provide the products and service that can satisfy consumers who usually want various kinds of automobiles. This paper studied the relations among several demographic characteristics(gender, age, occupation, income) of consumers and automobile's attributes(engine performance, engine displacement, price, maintenance expenses, color, etc.) and preferred automobile(kind, size, company, price). For the relation research we established a model and related hypotheses and used a questionnaire survey, where 350 subjects were questioned. After the analysis, many statistically significant results are obtained : consumer's gender has relations with the preference for engine performance, engine displacement, price, color, and design; age has relations with the preference for engine displacement, maintenance expenses, free checking during A/S period, etc., occupation has relations with the preference for engine performance, engine displacement, price, maintenance expenses, fuel efficiency, etc. : income has relations with the preference for engine performance, engine displacement, price, maintenance expenses, mileage, reputation of car manufacturing companies, etc.; price and fuel efficiency has relations with the preference for car manufacturing companies. These results suggest the consumer-oriented sales of automobiles and are expected to be helpful for the effective strategy development of automobile marketing.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.2
• /
• pp.69-78
• /
• 2006

This paper is concerned with analyzing the images of Korean automobiles using, so called, sensory engineering, which adapts the sensory and subjective assessment of human beings in evaluating the quality of product. The methodology of analysis is suggested in this paper according to the following steps. First, 14 pairs of adjectives, which describe the image of object cars in view of the semantic differential method, are derived from consulting with several expert panels. Nextly, factor analysis is performed in order to obtain the axises, by which the images space of the object automobiles are specified, and then the images of the object automobiles are measured by the coordinate of all the object automobiles in the image space. In this paper, a sensory estimation experiment is performed to a panel consisting with In undergraduate students residing in the region of Daegu. From the result of analysis of this paper, target images, which the automobile manufacturers are intended, are achieved by and large except one company.

• International Area Studies Review
• /
• v.14 no.1
• /
• pp.161-181
• /
• 2010

This thesis researches how country image and product attributes as well as brand personality influence U.S.A, Chinese and Indian Consumers' Korean automobile brand selection and the strategic implications of this study are as follows. First, Country image and Brand personality have more influence on U.S.A Consumers than Chinese and Indian consumers on selection of Korean automobiles. Second, All three of consumers have more influence by product attributes than other two factors, Chinese consumers has more influences by product attributes than U.S.A and Indian consumers have. Throughout this study it can be acutely recognized that brand personality and product attributes as well as country image influence on selection of automobiles made in Korea although there exist differences among three other consumers. This study suggests Hyundai automobiles in U.S.A, China and India need effort to develop representative brands with a unique personality.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.2
• /
• pp.37-41
• /
• 2017

In the development of means of transportation, human beings who walk, ride or ride carriages are now enjoying the benefits of many means of transportation, including bicycles, airplanes, trains, buses, and cars. In the case of automobiles among various means of transportation, there is an advantage that an individual can conveniently move while possessing it. To solve air polution problems at the same time, eco-friendly automobiles such as low-noise, low-pollution, and high-efficiency automobiles have emerged. However, in the case of eco-friendly vehicleJ, engine noise at low speeds is a noise that is unlike existing vehicles and poses a threat to the safety of pedestrians. In this study, virtual engine system has been developed to prevent engine accidents caused by low- The pedestrians are aware of the fact that the vehicle is approaching.