• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.18-24
• /
• 2018

The policy-making and technological development of eco-friendly automobiles designed to increase their supply is ongoing, but the internal combustion engine still accounts for about 95% of the automobiles in use. Also, in order to meet the stricter emission regulations of internal combustion engines based on fossil fuels, the proportion of after-treatments for vehicles and (ocean going) vessels is gradually increasing. Natural gas is a clean fuel that emits few air pollutants and has been used mainly as a fuel for city buses. In the long term, we intend to develop a new NGOC/LNT+NGCO/SCR combined system that simultaneously reduces the toxic gases, $CH_4$ and NOx, emitted from CNG buses. The objective of this study is to investigate the characteristics of $de-CH_4/NOx$ according to the ceramic and metal substrates of the SCR (Selective Catalytic Reduction) catalysts mounted downstream of the combined system. The V and Cu-SCR catalysts did not affect the $CH_4$ oxidation reaction, the two NGOC/SCR catalysts each coated with two layers began to oxidize $CH_4$ at $400^{\circ}C$, and the amount of $CH_4$ emitted was reduced to about 20% of its initial value at about $550^{\circ}C$. The two NGOC/SCR catalysts each coated with two layers showed a negative (-) NOx conversion rate above $350^{\circ}C$. The ceramic-based combined system reached LOT50 at $500^{\circ}C$, which was about 20% higher in terms of the $CH_4$ conversion rate than the metal-based combined system, showing that the combined system of NGOC/LNT+Cu-SCR is a suitable combination.

• Korean Journal of Veterinary Research
• /
• v.28 no.1
• /
• pp.179-185
• /
• 1988

Present study was undertaken in order to evaluate the lead contents of various feedstuffs produced in Korea and the effect of the burning of gasoline by automobiles on the lead contents. Ninety-one samples near and 95 far road were collected from 9 regions(Do). All of the samples were washed, dry-ashed and analyzed for lead content using atomic absorption spectrophotometer. The mean values obtained were checked for significance of difference using computer. The results obtained were summerized as follows: 1. The lead content in ${\mu}g/g$ of agriculture-byproducts were measured with the following mean values and ranges(in parentheses). Rice bran: $2.07{\pm}1.67$ (0-5.00), rice hull $1.84{\pm}1.18$ (0-3.71), rice straw, $1.27{\pm}1.09$ (0-3.62), soybean pod:$4.55{\pm}3.13$ ($1.13{\pm}10.43$), and wheat bran: $1.69{\pm}0.86$ (0-3.65). 2. The lead content in ${\mu}g/g$ of pasture plants were measured with the following mean values and ranges. Kudzu:$2.71{\pm}1.74$ ($0.38{\pm}8.75$), leed: $2.03{\pm}1.61$ (0-4.54), lespedeza:$4.73{\pm}5.93$ (0-31.25), sagebrush: $4.08{\pm}3.75$ (0-12.18), Korean-grass: $2.11{\pm}1.38$ (0-5.50), maizestalk: $2.62{\pm}2.35$ (0-8.65), clover: $3.83{\pm}2.97$ (0-12.19), alfalfa: $7.14{\pm}0.97$ (4.46-9.25), and timothy: $5.86{\pm}4.79$ (0-9.25). 3. Fourteen samples (22.2%) out of 63 agriculture-byproduct samples and 42 (34.2%) out of 123 pasture plant samples showed lead content of more than $3{\mu}g/g$ which are said to be the upper limit value for cattle. 4. No significant difference between the mean lead contents of near road, and those of far road was recorgnized. 5. The regional mean values for all kinds of samples collected in Kyungbuk and Kyungnam were significantly (p<0.05, p<0.10) higher compared to those in Chungnam and Jejudo.6. From these results it may be concluded that the burning of gasoline by automobiler did not affect on the lead contentes of washed feedstuffs produced in Korea at present.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.271-277
• /
• 2013

Skin pass rolling is a very important process for applying a certain elongation to a strip in the cold rolling and annealing processes, which play an important role in preventing the stretching of the yield point when the material is processed. The exact prediction of the rolling force is essential for obtaining a given elongation with the steel grade and strip size. Unlike hot rolling and cold rolling, skin pass rolling is used to apply an elongation of within 2% to the strip. Under a small reduction, it is difficult to predict the rolling force because the elastic deformation behavior of the rolls is complicated and a model for predicting the rolling force has not yet been established. Nevertheless, the exact prediction of the rolling force in skin pass rolling has gained increasing importance in recent times with the rapid development of high-strength steels for use in automobiles. In this study, the possibility of predicting the rolling force in skin pass rolling for producing various steel grades was examined using foil rolling theory, which is known to have similar elastic deformation behavior of rolls in the roll bite. It was found that a noncircular arc model is more accurate than a circular model in predicting the roll force of high-strength steel below TS 980 MPa in skin pass rolling.

• Spatial Information Research
• /
• v.20 no.2
• /
• pp.13-24
• /
• 2012

To prevent the damage to human health by climate change, vulnerability assessment should be conducted for establishment of adaptation strategies. In this study, vulnerability assessment was conducted to provide information about vulnerable area for making adaptation policy. vulnerability assessment for human health was divided into three categories; extreme heat, ozone, and epidemic disease. To assess vulnerability, suitable indicators were selected by three criteria; sensitivity, adaptive capacity, and exposure, spatial data of indicators were prepared and processed using GIS technique. As a result, high vulnerability to extreme heat was shown in the low land regions of southern part. And vulnerability to harmful ozone was high in the surrounding area of Dae-gu basin and metropolitan area with a number of automobiles. Vulnerability of malaria and tsutsugamushi disease have a region-specific property. They were high in the vicinity of the Dimilitarized zone and south-western plain, respectively. In general, vulnerability of human health was increased in the future time. Vulnerable area was extended from south to central regions and from plain to low mountainous regions. For assessing vulnerability with high accuracy, it is necessary to prepare more related indicators and consider weight of indicators and use climate prediction data based on the newly released scenario when assessing vulnerability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.473-479
• /
• 2017

Due to environmental pollution, hazards of the human body, and global warning, changes in the power train of automobiles are intensifying, and the market forelectronic vehicles is rising. Also, in order to meet the stricter emission regulations forautomobiles with internal combustion engines based on fossil fuel, the proportion of after-treatments for vehicles and vessels is increasing gradually. The objective of this study is to investigate the effectsfrom additive ceric oxide ($CeO_2$) loading amounts to improve the methane ($CH_4$) and nitric oxide (NOx) abatement ability of the natural gas oxidation catalysts(NGOC) reducing toxic gases emitted from compressed natural gas (CNG) buses. Three kinds of NGOC were prepared under the following conditions: fresh and $700^{\circ}C$ for 12hr thermal aging, and the reduction performance of toxic gases was evaluated. Fresh $1Pt-3Pd-1Rh-3MgO-6CeO_2/(Al+Z)$ NGOC containing 6wt% $CeO_2$ had the highest dispersivity of palladium (Pd) with high selectivity to $CH_4$ and improved harmful gas reduction performance. The NGOC with 6wt% $CeO_2$ loaded the least decreased in the dispersivity of the noble metal, and showed the highest reduction of harmful gases due to the thermal durability of $CeO_2$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.9-17
• /
• 2017

Ensuring the safety of automobiles and trains during system operation is regarded as indispensable due to the progress in unmanned operation. The automotive functional safety standard, ISO 26262, has been proposed to ensure the safe design of vehicles. This standard describes in detail the required risk analysis and evaluation procedure and safety measures, while appropriately reflecting the system design information. Therefore, much research has been done on the risk analysis procedure, wherein the design information is mostly extracted from physical components of similar systems already in operation, the information traced back to obtain constituent functions, and then methods of identifying risk sources are studied. This method allows the sources of risk to be identified quickly and easily, however if the design requirements are changed or systems are newly developed, others may be introduced which are not accounted for, thereby yielding mismatched design information. To resolve this problem, we propose a top-down analysis in order to utilize the system design information appropriately. Specifically, a conceptual system is designed to obtain the functions, which are then analyzed. Then, a function-based fault tree analysis is conducted, followed by a risk source analysis. In this paper, a case study of automotive safety is presented, revealing that the proposed method can analyze the risk sources with reduced possibility of omission by systematically reflecting the system design information.

• Journal of Environmental Science International
• /
• v.16 no.2
• /
• pp.179-185
• /
• 2007

Nitrous oxide ($N_2O$) is an important trace gas in the atmosphere not only because of its large global warming potential (GWP) but also because of the role in the ozone depletion in the stratosphere. It has been known that soil is the largest natural source of $N_2O$ in global emission. However, anthropogenic sources contributing from industrial section is likely to increase with rising the energy consumption, and transportation as well. In this study, a total of 32 gasoline-powered passenger vehicles (ranging from small to large engine's displacement and also ranging from aged catalyst to new catalyst) were tested on the chassis dynamometer system in order to elucidate the characteristics of $N_2O$ emission from automobiles under different driving modes. Ten different driving modes developed by NIER were adapted for the test. The results show that the $N_2O$ emission decreases logarithmically with increase of vehicle speed over the all test vehicles ($N_2O$) emission = -0.062 Ln (vehicle speed) + $0.289,\;r^2=0.97$). It revealed that the larger engine's displacement, the more $N_2O$ emission were recorded. The correlation between $N_2O$ emission and catalyst aging was examined. It found that the vehicles with aged catalyst (odometer record more than 8,0000km) emit more $N_2O$ than those with new catalyst. Average $N_2O$ emission was $0.086{\pm}0.095\;N_2O-g/km$ (number of samples=210) for the all test vehicles over the test driving modes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.1
• /
• pp.81-88
• /
• 2003

For driver's convenience, the ACC(Adaptive Cruise Control) requires a system which determines the direction of vehicles and controls the vehicle to keep the distance among the automobiles constant. This paper describes the microstrip array antennas designed to operate at 24 GHz, and used as a direction indicator of moving vehicles. 8${\times}$2 transmit array antenna with wide beamwidth, 8${\times}$4 receive center array antenna, and two 8${\times}$8 receive array antennas with narrow beamwidth were designed and fabricated. Measurement results for the arrays showed that the azimuthal beamwidth is 50$^{\circ}$and the gain is 16.7 dBi for the transmit array antenna. For the receive array antenna, the center, the left, and the right array antenna have beamwidths of 20$^{\circ}$, 13$^{\circ}$, 13$^{\circ}$respectively, and have gains of more than 20 dBi. The left and right array antenna have the beam tilt angle of ${\pm}$18$^{\circ}$. The measured radiation patterns showed a good agreement with the simulated patterns, and the designed array antennas are suitable fur detecting 3 directions of the vehicle within the scan angle area.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.3
• /
• pp.71-79
• /
• 2004

Owing to the rapid increase of the number of automobiles, the traffic is being heavily crippled as time goes by. To provide drivers with better safety and convenience, a variety of CNSs(Car Navigation System) are being installed more and more specially for the vehicles which are produced in recent days. As the CNS has gained the public popularity, it has been playing a role as a component of the multimedia system in a vehicle in addition to providing the capability of route guidance service. It is, therefore, now recognized as an important unit of the vehicle interior system. As the situation has been changed as formerly described, it is necessary that not only the functions but also the usability and exterior features are to be designed to suit customers' tastes. This paper is an attempt to find out what the major sensibility factors which customers want as far as a CNS is concerned are. Because these factors can differ from a vehicle type to another that customers prefer, the analysis is based on the vehicle preference. It is proved that MDS(Multi Dimensional Scaling) is an effective method to analyze the sensibility factors for the different types of vehicles. The result shows that for the people who prefer the sedan-type vehicles, luxuriousness, harmoniousness, and texture are major factors. For people who like sports car, faminism, salience, and dynamics are major factors. For people who prefer SUV's(Sports Utility Vehicle) or MPV's(Multi Purpose Vehicle), solidity, dynamics, and convenience are important.

• The Korean Journal of Air & Space Law and Policy
• /
• v.25 no.2
• /
• pp.201-230
• /
• 2010

With starting the industry of automobiles, railroads and mining, the legal principle of "erlaubtes Risiko" that began as a means of maintaining the revitalized world for the cause of social utility has interpreted as a system of negligence theory in the precedent while it has gained academic recognition. Yet in aircraft operation, which is one area of high technology, CAT which can be the cause of some accidents or events or thunderstorm with turbulence is an abnormal meteorological phenomenon with frequent change that cannot be monitored perfectly just as some patient with unstable condition and that cannot be ascertained about not only the possibility of its happening but also the degree of how big the accident is. Yet the use of jet current which has the possibility of CAT can be an act of high social utility where we not only drastically cut down on time fuel also guarantee the arrival and departure on schedule when landing in airports that have thunderstorm which does not appear as fatal risk. Although we could take some measures where we can predict and avoid the potential risk, easing the regular duty of care is necessary by applying the legal principles of permitted risk concerning the incidents and accidents caused by operating in areas with the risk of turbulence or CAT with the low probability by the reason of social utility.