• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.181-183
• /
• 1986

This paper describes the concept of ADS (Autonomous Decentralized System) and its application to FA (Factory Automation). The schemes of ADFAS (Autonomous Decentralized Factory Automation System) utilizing these concepts are presented.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.393-397
• /
• 2004

In these days, a scale of system is more and more complex and large. The centralized system has the operation management method to be limited in the large scale system. In this paper, we proposed ACOS(Autonomous decentralized Container terminal Operating System). It is applied to container terminal using by autonomous decentralized system which can solve the problem of the centralized operation system. Also, we can defined a function of the ACOS's sub-system and showed a flowchart on operation method for the ACOS.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.528-533
• /
• 2004

The purpose of this thesis is to construct the autonomous decentralized train traffic management structure using techniques of Autonomous Decentralized System. Currently, a method of train traffic control is making use of CTC(Centralized Traffic Control). Its operation method is divided into the remote mode and the local mode. The classified basis is according to the control authority of install signals in track side. In most cases, a large scale station is operated by the local mode. Because of dispatchers in center can not control the shunting works influence on the main route. In order to solve these problem s, we analyzed a current operation condition and system requirements. Moreover, this thesis is constructing autonomous decentralized train traffic management structure. Finally, this research proposed that interface with CTC and step-by-step construction.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.2045-2050
• /
• 2008

The Autonomous station control system by applying the concepts of autonomous decentralized system is a system which can solve the problems of the current central control system. The Autonomous station control system tester developed in order to test for Autonomous station control system. The main function of tester is a time-deadline test, a schedule broadcast test, a route control test and a version-up test, etc. In the paper, we build the reliability of the Autonomous station control system by testing the Autonomous station control system tester. Also, the test enable the on-line test without the system interruption and verify the function of the Autonomous station control system developed by applying the concepts of Autonomous decentralized system to the current Central control system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.323-326
• /
• 1995

During a fast decade, an automatic control technology makes an aggressive improvement with the developments of computer and communication technology. In large scale and complicated systems, an autonomous decentralized control system is required in which the sub-systems must have some ability such that the self-judgement and self-performance functions. In this paper, we propose an algorithm to realized these functions using micro mobile robot which is applied to a control of a werehouse. The proposed algorithm is based on performance index, and the selecting rules of the task between the sub-systems are induced by the index. Also, it is effected by weighting function which is determined by environment and kind of works. To verify the effectiveness of this algorithm, we develop the simulator to implement the autonomous decentralized control and apply to the micro mobile robot on the PC machine.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.507-515
• /
• 2009

This paper proposes an autonomous decentralized control for a parallel connected uninterruptible power supply (UPS) system based on a fast power detection method using a FPGA based hardware controller for a single phase system. Each UPS unit detects only its output voltage and current without communications signal exchange and a quasi dq transformation method is applied to detect the phase and amplitude of the output voltage and the output current for the single phase system. Fast power detection can be achieved based on a quasi dq transformation, which results in a realization of very fast transient response under rapid load change. In the proposed method, the entire control system is implemented in one FPGA chip. Complicated calculations are assigned to hardware calculation logic, and the parallel processing circuit makes it possible to realize minimized calculation time. Also, an Nios II CPU core is implemented in the same FPGA chip, and the software can be applied for non-time critical calculations. Applying this control system, an autonomous decentralized UPS system with very fast transient response is realized. Feasibility and stable operation are confirmed by means of an experimental setup with three UPSs connected in parallel. Also, rapid load change is applied and excellent performance of the system is confirmed in terms of transient response and stability.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.701-706
• /
• 1994

Holonic manufacturing system is a new approachto the organization and architecture of decentralized, autonomous and cooperative manufacturing system. The new paradigm combines the concepts of hierarchical systems and the integration of autonomous elements in distributed system. Today's scheduling and control techniques are mostly based on a centralized structure. Only little work has been done on scheduling and control of decentralized, autonomous and cooperative manufacturing system. This paper proposes a new approach IPM(Interactive Prediction Method) for scheduling and control of holonic manufacturing system.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.311-318
• /
• 2003

Traffic management means the management of streams of people, vehicle and cargo. Its aim is to help creating an efficient, safe and environmentally friendly transport system. Traffic management can roughly be divided in traffic control and monitoring, traffic information and demand management. The main purpose of this thesis is providing the basis for developing the next generation train traffic management system by comparing domestic and abroad train traffic management system. The composition of this thesis has been discussed in the following order of the comparison of train traffic management system's function, the introduction of Autonomous Decentralized system, the comparison between CTC and ATOS. the comparison between the hierarchy system and Autonomous Decentralized system, the study of introduction plan of Autonomous Decentralized-type train traffic management system and conclusion.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1355-1359
• /
• 2004

In this paper, We elicit the necessity of the Autonomous Decentralized Traffic Control System by analyzing problems of the Centralized Traffic Control System and present operation system. The automatic traffic control system using in large and high-density railway stations is designed and implemented on the basis of the elicited necessity in this paper. It is proposed to use broadcasting protocol for interface of stations in order to ensure autonomy. The result is that advantages of the Autonomous Decentralized Traffic Control System makes on-line expansion and maintenance available. step-by-step construction available. and reduce the area of the influences of system fault when any system fault happens.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.595-609
• /
• 2020

In this study, we propose a decentralized mathematical model for predictive control of a system of multi-autonomous unmanned aerial vehicles (UAVs), also known as drones. Being decentralized and autonomous implies that all members make their own decisions and fly depending on the dynamic information received from other unmanned aircraft in the area. We consider a variety of realistic characteristics, including time delay and communication locality. For this flocking flight, we do not possess control for central data processing or control over each UAV, as each UAV runs its collision avoidance algorithm by itself. The main contribution of this work is a mathematical model for stable group flight even in adverse weather conditions (e.g., heavy wind, rain, etc.) by adding Gaussian noise. Two of our proposed variance control algorithms are presented in this work. One is based on a simple biological imitation from statistical physical modeling, which mimics animal group behavior; the other is an algorithm for cooperatively tracking an object, which aligns the velocities of neighboring agents corresponding to each other. We demonstrate the stability of the control algorithm and its applicability in autonomous multi-drone systems using numerical simulations.