• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.389-395
• /
• 2022

In order to ensure reliability the high-level automated driving such as Advanced Driver Assistance System (ADAS) and universal robot taxi provided by autonomous driving systems, the operation with high integrity must be generated within the defined Operation Design Domain (ODD). For this, the position and posture accuracy requirements of autonomous driving systems based on the safety driving requirements for autonomous vehicles and domestic road geometry standard are necessarily demanded. This paper presents localization requirements for safe road driving of autonomous ground vehicles based on the requirements of the positioning system installed on autonomous vehicle systems, the domestic road geometry standard and the dimensions of the vehicle to be designed. Based on this, 4 Protection Levels (PLs) such as longitudinal, lateral, vertical PLs, and attitude PL are calculated. The calculated results reveal that the PLs are more strict to urban roads than highways. The defined requirements can be used as a basis for guaranteeing the minimum reliability of the designed autonomous driving system on roads.

• ETRI Journal
• /
• v.45 no.1
• /
• pp.75-92
• /
• 2023

Level 3 autonomous vehicles require conditional autonomous driving in which autonomous and manual driving are alternately performed; whether the driver can resume manual driving within a limited time should be examined. This study investigates whether the demographics and subjective driving tendencies of drivers affect the take-over performance. We measured and analyzed the reengagement and stabilization time after a take-over request from the autonomous driving system to manual driving using a vehicle simulator that supports the driver's take-over mechanism. We discovered that the driver's reengagement and stabilization time correlated with the speeding and wild driving tendency as well as driving workload questionnaires. To verify the efficiency of subjective questionnaire information, we tested whether the driver with slow or fast reengagement and stabilization time can be detected based on machine learning techniques and obtained results. We expect to apply these results to training programs for autonomous vehicles' users and personalized human-vehicle interfaces for future autonomous vehicles.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.4
• /
• pp.116-129
• /
• 2023

Recently, interest in autonomous driving has drawn attention to autonomous cooperative driving, which considers the development of driving technology of autonomous vehicles and the development of infrastructure that constitutes a driving environment. According to the concept of autonomous cooperative driving, This study analyzes the new infrastructure for autonomous driving that can complement the information of existing precise road maps and adding HD map layer as the new infrastructure. The new infrastructure for autonomous driving presented two types of improved facilities and one type of sensor only facility. Analysis of HD maps shows that information such as junction points rarely changes, but it is expected that infrastructure for autonomous driving can be added to convey the meaning of paying attention to obstacles that may arise at the junction. In this way, the new infrastructure for autonomous driving needs to support the roles of guidance, instruction, and attention that existing road facilities.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.4
• /
• pp.81-91
• /
• 2021

Last year, the Autonomous Vehicle Act was enacted to respond to deployment of autonomous vehicles. But the Act stipulates the operation of autonomous vehicle pilot zones, In addition, in order to analyze autonomous vehicle accidents and establish a reasonable damage compensation system, the Automobile Damage Compensation Guarantee Act was revised. But, It is necessary to seek plans for institutional development such as detailed concepts of self-driving cars and driving, a security certification system for securing safety of autonomous cooperative driving, and enhancement of the effectiveness of special cases related to personal information processing. I would like to seek ways to improve the legal system to respond reasonably to the deployment of autonomous vehicles.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.2
• /
• pp.44-49
• /
• 2015

This paper presents an evaluation scenario of safety performance for extraordinary service permission of autonomous vehicle driving on a motorway. Based on advanced driver assistance system (ADAS) which is already mass-production, an autonomous vehicle driving on motorway is tested on the public roads and also getting close to mass-production. Before the autonomous vehicle tested, the safety of autonomous driving system should be evaluated based on a proper test scenario. Prior to develop the test scenario, this paper reviews the licensing standards for an autonomous vehicle in California and Nevada, and the international regulations of each ADAS. To develop the scenario, the driving conditions of motorway are categorized into five modes and fundamental evaluation requirements of elements of autonomous driving system are derived. An evaluation scenario, which represents the real driving conditions, has been developed to assess the safety of autonomous vehicle. This scenario has validated by computer simulation using model predictive control (MPC) based autonomous driving algorithm.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.4
• /
• pp.60-69
• /
• 2022

Recently, the importance of simulation validation in a virtual environment for autonomous driving system validation is increasing. At the same time, interest in the advancement of the virtual driving environment is also increasing. To develop autonomous driving technology, a simulation environment similar to the real-world environment is needed. For this reason, not only the road model is configured in the virtual driving environment, but also the driving environment configuration that includes the surrounding environments -traffic, object, etc- is necessary. In this article, FMTC, which is a test bed for autonomous vehicles, is implemented in a virtual environment and advanced to form a virtual driving environment similar to that of real FMTC. In addition, the similarity of the virtual driving environment is verified through comparative analysis with the real FMTC.

• Korean Journal of Agricultural Science
• /
• v.48 no.3
• /
• pp.617-627
• /
• 2021

In the field of on-road motor vehicles, the level for autonomous driving technology is defined according to J3016, proposed by Society of Automotive Engineers (SAE) International. However, in the field of agricultural machinery, different standards are applied by country and manufacturer, without a standardized classification for autonomous driving technology which makes it difficult to clearly define and accurately evaluate the autonomous driving technology, for agricultural machinery. In this study, a method to classify the autonomy levels for autonomous agricultural machinery (ALAAM) is proposed by modifying the SAE International J3016 to better characterize various agricultural operations such as tillage, spraying and harvesting. The ALAAM was classified into 6 levels from 0 (manual) to 5 (full automation) depending on the status of operator and autonomous system interventions for each item related to the automation of agricultural tasks such as straight-curve path driving, path-implement operation, operation-environmental awareness, error response, and task area planning. The core of the ALAAM classification is based on the relative roles between the operator and autonomous system for the automation of agricultural machines. The proposed ALAAM is expected to promote the establishment of a standard to classify the autonomous driving levels of self-propelled agricultural machinery.

• ETRI Journal
• /
• v.43 no.4
• /
• pp.603-616
• /
• 2021

Over the last few years, autonomous vehicles have progressed very rapidly. The odometry technique that estimates displacement from consecutive sensor inputs is an essential technique for autonomous driving. In this article, we propose a fast, robust, and accurate odometry technique. The proposed technique is light detection and ranging (LiDAR)-based direct odometry, which uses a spherical range image (SRI) that projects a three-dimensional point cloud onto a two-dimensional spherical image plane. Direct odometry is developed in a vision-based method, and a fast execution speed can be expected. However, applying LiDAR data is difficult because of the sparsity. To solve this problem, we propose an SRI generation method and mathematical analysis, two key point sampling methods using SRI to increase precision and robustness, and a fast optimization method. The proposed technique was tested with the KITTI dataset and real environments. Evaluation results yielded a translation error of 0.69%, a rotation error of 0.0031°/m in the KITTI training dataset, and an execution time of 17 ms. The results demonstrated high precision comparable with state-of-the-art and remarkably higher speed than conventional techniques.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.147-159
• /
• 2023

In order to make autonomous vehicles more trustworthy, it is necessary to focus on the users of autonomous vehicles. By evaluating the preferences for driving behaviors of autonomous vehicles, we aim to identify driving behaviors that increase the acceptance of users in autonomous vehicles. We implemented two driving behaviors, aggressive and cautious, in a driving simulator and allowed users to experience them. Biometric data was collected during the ride, and pre- and post-riding surveys were conducted. Subjects were categorized into two groups based on their driving habits and analyzed against the collected biometric data. Both aggressive and cautious driving subjects preferred the cautious driving behavior of autonomous vehicles.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.1
• /
• pp.16-26
• /
• 2023

Recently, the importance of simulation in a virtual driving environment as well as real road-based tests for autonomous vehicle testing is increasing. Real road tests are being actively conducted at K-City, an autonomous driving test bed located at the Korea Automobile Safety Test & Research Institute of the Transportation Safety Authority. In addition, the need to advance the K-City virtual driving environment and build a virtual environment similar to the autonomous driving system test environment in real road tests is increasing. In this study, for K-City of Korea Automobile Safety Test & Research Institute, using detailed drawings and actual field data, K-City virtual driving environment was advanced, and similarity verification was verified through comparative analysis with actual K-City.