• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.474-479
• /
• 2003

This paper addresses the problem of B-spline surface interpolation to serial contours, where the number of points varies from contour to contour. A traditional lofting approach creates a set of B-spline curves via B-spline curve interpolation to each contour, makes them compatible via degree elevation and knot insertion, and performs B-spline surface lofting to get a B-spline surface interpolating them. The approach tends to result in an astonishing number of control points in the resulting B-spline surface. This situation arises mainly from the inevitable process of progressively merging different knot vectors to make the B-spline curves compatible. This paper presents a new approach for avoiding this troublesome situation. The approach includes a novel process of getting a set of compatible B-spline curves from the given contours. The process is based on the universal parameterization [1,2] allowing the knots to be selected freely but leading to a more stable linear system for B-spline curve interpolation. Since the number of control points in each compatible B-spline curve is equal to the highest number of contour points, the proposed approach can realize efficient data reduction and provide a compact representation of a B-spline surface while keeping the desired surface shape. Some experimental results demonstrate its usefulness and quality.

• Transactions of Materials Processing
• /
• v.12 no.2
• /
• pp.142-150
• /
• 2003

To construct the extrusion die surface, a B-Spline surface scheme based on the cubic B-Spline curve interpolation method is proposed in the present work. The inlet and outlet profiles are described with B-Spline curves by using the centripetal method for uniform parameterization. The interior control points of surface are generated using the derivative characteristics of B-Spline curve. A complete B-Spline surface is constructed by using appropriate coordinate transformation and knot deletion. In the present study, a quantitative measure for the control of surface is suggested by introducing the tangential vector and inclination angles at the inlet and outlet sections. To verify the validity of the proposed method, automatic surface generation is carried out for the various types of extrusion die surface.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.21-27
• /
• 1991

This paper outlines the method of formulating the bi-cubic B-spline surface of ship hull, employing the open uniform knot vector as well as the periodic uniform knot vector. An appropriate set of B-spline control vertices to generate the B-spline surface is determined by obtaining the pseudoinverse matrix of basis functions. The comparison between the given offsets and the resulting coordinates from the generated ship hull surface shows a good agreement. To check the fairness of the surface Gaussian curvature is calculated on many small subpatches and displayed on the black-and-white plot of the isoparametric net of the surface.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.957-960
• /
• 1995

A new method is introduced for the parametrization in B-spline surface interpolation. THis method uses the basis function to assign the parameter values to the arbitrary set of geometric data. This method gives us several important advantages in geometric modeling.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.1-14
• /
• 1992

Using form parameters representing geometric characteristics of the form, this paper attempts the generation of 3-D free surface given in terms of B-spline surface equation. This is achieved by coupling the form parameter decision, Coons surface of the form parameters, and B-spline. To check the validing of the present method, a analogous surface to the bulbous bow was generated.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.156-163
• /
• 2003

This research presents modeling of a functional surface which is a constructed free-formed surface. The modeling introduced in this paper adopts modified B-spline that is utilizing approximating technique. The modified B-Spline is constructed with altered control vertices. It is applied to measure points on a surface of an impeller blade. This research builds a surface-modeler accepting inputs of measured points. Generation of cutter-paths for NC machining employs the model of the constructed surfaces. The machined surfaces which is generated in several cases are compared in the aspect of machining accuracy.

• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.33-38
• /
• 2004

A new approach for the design of extrusion die surface of arbitrarily shaped section is presented. In order to generate the extrusion die surface. an automatic surface construction method based on B-spline surface and scalar field theory is proposed. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u- and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections. To verify the validity and effectiveness of the proposed method, automatic surface generation is carried out for extrusion dies of arbitrarily shaped sections.

• Transactions of Materials Processing
• /
• v.12 no.6
• /
• pp.572-581
• /
• 2003

In this paper, an automatic surface construction method based on B-spline surface and scalar field theory is proposed to generate the extrusion die surface of non-symmetric H-and U-shaped sections. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u-and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections. To verify the validity of the proposed method, automatic surface generation is carried out for extrusion die of non-symmetric H-and U-shaped sections.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.22 no.3
• /
• pp.19-26
• /
• 1985

This paper deals with the representation and fairing of ship hull using a B-spline surface which is known as a 3-D model in computer aided free-form design. The first part of this paper is devoted to the fundamental concepts of B-spline theory and its geometrical characteristics. In its second part are described the facillities for efficient application, fast rendering of B-spline surface, and intersection of B-spline surfaces. The examples are presented with actual application to a real ship in the last part. And also a new concept of evaluating the surface fairness by the Gaussian curvature isolines is briefly discussed and its examples are presented.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.318-321
• /
• 2003

In order to generate the extrusion die surface of non-symmetric H- and U-shaped sections, an automatic surface construction method based on B-spline surface and scalar field theory is proposed in this study. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u- and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections.