• 반도체디스플레이기술학회지
• /
• 제13권4호
• /
• pp.71-76
• /
• 2014

This paper presents the implementation for the BLDC motor speed control system using VHDL and FPGA. The BLDC motor is widely used in automation for its good robustness and easy controllability. In order to control the speed of the BLDC motor, the PI controller used for static RPM output of the BLDC motor to variations in load. In addition, by using the DA converter, we were able to monitor the BLDC motor reference speed and the current speed through real time. The motor speed command and the parameters of the PI speed controller were modified easily by the FPGA and the AD converter. Finally, in order to show the feasibility of the control algorithm the speed control characteristics of the motor was monitored using an oscilloscope and the DA converter. Further, the speed control system was designed in this paper has shown the applicability of the drive system of the factory automation.

• 해양환경안전학회지
• /
• 제29권6호
• /
• pp.704-711
• /
• 2023

본 논문은 직류전동기(DC motor)와 전기적인 특성은 유사하지만, 수명과 신뢰성이 향상된 BLDC 모터의 제어기법에 대해 언급하고 있다. BLDC모터는 회전자의 위치 정보를 사용하여 직류전동기의 기계적인 접촉에 의한 정류 장치를 제거함으로써 내구성과 속도 안정성을 향상시킬 수 있다. 본 연구에서는 BLDC모터의 권선에 흐르는 전류가 직류전동기의 전기자에 흐르는 구형파 형태의 전류인 것에 착안하여 직류전동기에 대한 제어기를 설계하고, 설계된 제어기를 3상 BLDC모터에 적용하여 제어기의 유효성을 확인하였다. 이를 위해 3상 BLDC모터의 전기적인 파라미터 값을 가지는 단상 직류전동기의 모델링을 실시하였고, 도출된 시스템에 대해 근궤적법을 적용하여 전동기의 속도제어를 위한 PI 제어기를 설계하였다. DC 전동기의 속도제어 시뮬레이션을 시행하여 제어기의 성능을 확인하였고, 동일한 제어기를 MATLAB으로 구현한 3상 BLDC모터의 속도제어에 적용하였다. DC 전동기와 유사한 제어 결과를 3상 BLDC모터에서 얻을 수 있었고, 이를 통해 연구에서 제안한 제어기법의 유용성을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.66-68
• /
• 2005

DC motor is easy to control and can make torque easily. DC motor uses wide range. But DCmotor have limited by using a brush and structural complexity. But, BLDC doesn't have brush so that is more simple than DC motor, and the rotor of BLDC motor is made by permanent magnet that dose not need to make a fixed flux speed for flux current. BLDC motor is very efficiency, controllable, and reliable. This paper presents an error detection with a BLDC motor current. Generally, BLDC motor current is used to current feedback, so that can make a critical fault in the system. this paper suggests to detect error by inspection of threshold current value both positive and negative.

• 전력전자학회논문지
• /
• 제12권4호
• /
• pp.277-284
• /
• 2007

본 논문은 전기추진시스템에 사용되는 BLDC 전동기 중에서 최대 토크 특성을 갖는 독립상 BLDC 전동기의 제어 특성에 대하여 기술하고자 한다. 독립 상 전동기는 각 상이 전기적으로 분리된 형태로 구성된 것이 특징이다. 이러한 특징을 분석하기 위하여 Y결선 3상 BLDC 전동기와 독립 3상 BLDC 전동기를 모델링하고, 시뮬레이션을 통하여 비교하였다. 시뮬레이션 결과 Y결선 3상 BLDC 전동기에 비하여 독립 3상 BLDC 전동기가 상전압이 높았다. 고정자 저항 및 인덕턴스가 일정할 때, 높은 상전압은 최대 상전류의 증가를 가져왔고, 이러한 전류 증가는 최대 토크를 증가시킨다. 그러므로 독립상 BLDC 전동기의 상전류를 제어함으로써 독립상 BLDC 전동기의 전류 맥동이 저감됨을 확인하였다.

• 한국전자통신학회논문지
• /
• 제3권4호
• /
• pp.266-275
• /
• 2008

본 논문에서는 전동기 파라미터와 부하에 강인한 속도 특성을 위해 디지털 IP제어를 이용한 BLDC 전동기의 센서리스 속도제어 방식을 제안한다. 단자 전압을 이용한 BLDC 전동기의 센서리스 구동시 회전자 위치 추정을 위해 아날로그 필터를 사용하기 때문에 부하나 속도에 영향을 받는다. 전동기 파라미터에 둔감하고 부하의 영향에도 강건한 센서리스 속도제어를 하기 위해서는 정확한 회전자 위치 추정과 연동하는 강인한 속도 제어기가 필요하다. 본 논문에서는 디지털 IP제어를 이용하여 부하의 변동에도 강인한 정속제어와 일정 부하로 운전 중 가감속시 임의의 속도변화에 대해 BLDC 전동기의 안정된 센서리스 제어가 가능하도록 구성하였다. 이에 대한 타당성은 실험을 통하여 입증하고자 한다.

• 제어로봇시스템학회논문지
• /
• 제22권11호
• /
• pp.925-931
• /
• 2016

The BLDC motor is used widely in industry due to its controllability and freedom from maintenance because there is no mechanical brush in the BLDC motor. Furthermore, it is suitable for high-speed applications, such as compressors and air blowers. For instance, for a compressor with a small impeller due to miniaturizing, the BLDC motor has to rotate at a very high speed to maintain the compression ratio of the compressor. Typically, to reach an ultra-high speed, airfoil bearings must be used in place of ball bearings because of their friction. Unfortunately, the characteristics of airfoil bearings change drastically depending on the revolution speed. In this paper, a BLDC motor with airfoil bearings is controlled with a PID controller. To analyze and determine the PID coefficients, the relay-feedback method is used. Additionally, for adaptive control, a fuzzy logic controller is used. Furthermore, the auto-tuning and self-tuning techniques are combined to control the BLDC motor. The proposed method is able to control the airfoil-bearing BLDC motor efficiently.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.939-945
• /
• 2009

This paper is described BLDC motor in the submarine propulsion system which is asked high power per unit area. This study analyzes the independent 6-phase BLDC motor a specific extended by existing the independent 3-phase BLDC motor and propose forward development direction. Independent 6-phase motor has a characteristics that phases of stator are independent electrically with each other and two's independence 3-phase BLDC motor are linked with each difference of 60 degree. Six-phase BLDC motor is simulated with Matlab-simulink, the simulation result has a high current and low torque pulsation than existent independence 3-phase BLDC motor.

• 대한안전경영과학회지
• /
• 제17권4호
• /
• pp.403-410
• /
• 2015

This study documents the 3-phase BLDC(Brushless DC) motor to improve conventional exhaust fan motor. Energy efficiency, noise, and air pollution reduction for the high-performance vibration of the BLDC motor has been used in many fields. It is necessary to achieve the information of rotor position for driving 3-phase type brushless DC motor. It is also necessary that the PWM control algorithm design for a MOSFET driver to control the motor speed control for each of three phases. BLDC motors for exhaust fan, we studied the controller and software. The control circuit and motor control program through which Exhaust fan up close and person can be used safely and protect the environment.

• 전력전자학회논문지
• /
• 제21권2호
• /
• pp.144-149
• /
• 2016

This paper presents a power control method of high-speed single-phase BLDC motor. Most electric appliances require a power factor corrector (PFC) to mitigate grid current harmonics. However, the reactive components and power semiconductors in the PFC increase system cost and dimension. In this paper, a new motor drive system for a high-speed single-phase BLDC motor is proposed, which can decrease grid current harmonics without PFC by directly manipulating motor power and eliminating bulky electrolytic dc-link capacitor. Given that the proposed motor power control method does not require motor current controller, no current sensor is necessary. Moreover, the proposed algorithms can be easily implemented using a low-cost micro-controller. The effectiveness of the proposed power control method is verified by experiments.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1138-1142
• /
• 2007

As a brush DC motor, the brushless DC motor is also operated by DC power supply but has no mechanical contacts occurred by a brush or a commutator. Though the performance of BLDC motor is almost similar with that of DC motor, the BLDC motor has the advantage of the high speed responsibility, the high controllability, and the high effectiveness. The control valve using the BLDC motor, which excludes the burnout effect provoked possibly by the vacuum condition during the flight, is employed for the upper stage of a launch vehicle. For the component level analysis, the dynamic response characteristics of BLDC and DC motors to the same design input sources have been studied in using AMEsim.