• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.717-723
• /
• 2011

When the Balise(the device to transmit information between the on-board equipment and the wayside equipment) failure occurs, it may not be able to transmit data(Telegram) required for the train running. And in some cases, it may be able to cause an accident. Therefore, both the Balise failure affecting train safety running and the hazard in accordance with Balise failure require some activities to establish them. General failure mode & hazard analysis associated with the Balise are described in UNISIG SUBSET-036 spec & UNISIG SUBSET-088 spec. And, with reference to these specifications, safety activities are being performed. In recent domestic railway, the train control system applying ETCS(European Train Control System) Level 1, 2 is being serviced and is being planned, and as part of this system, the Balise is being applied. The design-method of the Balise device for each manufacturer are different, therefore the Balise failure mode & failure rate are different, either. But the functionalities & transmission-data format(Telegram) of the Balise in ETCS Level 1, 2 application for each manufacturer are identical. Accordingly, the hazard caused by function-fail can be identical, either. In order to establish these hazard, in this paper, we analyzed the detailed functions of the Balise. And we analyzed the Balise failure types & failure effects in accordance with the detailed functions.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.161-170
• /
• 2017

The balise is a device for the railroad signal control systems, which is installed between both rail. The balise sends fixed or variable data, named telegram, to the train with wireless method. The telegram includes the position information, the movable distance under the signal status, the gradient, the speed, the temporary speed limit, etc. This research is on a design of the DBPL encoder for the balise. Normally the DBPL encoder for the balise is with the ASIC or FPGA technology. In this research, the DBPL encoder is designed with commercial low power operable micro-controller. The firmware(logic level encode) and the SPI Bus function block(physical level output) of the micro-controller are used for the DBPL encode. Under the european standard, the required working speed of the DBPL encoder is 564.48Kbps. The DBPL encoder of this research is tested under the speed of 564.48Kbps, and it worked properly.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.472-475
• /
• 2009

Nowadays, Short headway is a requirement of Signaling System applied to subway and Light Rail Transit (LRT) being constructed in Korea. To satisfy this Systematic Requirement, the accuracy of train position information on the line is one of the main element to improve ATC system safety and performance. On-board ATC system performs feasibility of Train Position as comparing data from balise installed along the track with data from tachometer installed at both axles of train.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.256-263
• /
• 2009

KORAIL carries out an improvement project of railway signaling system for the conventional line from the existing method which permits a train to move within limited speed the ground signal of ATS(Automatic Train Stop) system. The proposed system makes possible that a train can be driven using a speed profile created by onboard signaling system(ATP) with the movement authority from ground balise. A driving test over 100,000km is being executed by developing a tilting train for the speed elevation on the conventional line. And, the introduction of the tilting train by ATP system to the Jung-ang line is expected. However, a speed elevation on a curved line section has a restriction. Therefore, research on safety braking model and train separation control technology for the localization of ATP system is required preferentially. In this paper, we presented a safety braking model of ATP system and a train separation control method that use ground balise as variable information provider, and executed a performance simulation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.6
• /
• pp.150-158
• /
• 2016

This paper is on a design of a new balise system which has a new functional part of a micro-power inductive wireless loop vehicle detector. The field test has processed and the data has analyzed for check the solar energy operable ability of the detect data interconnect sub-system which includes repeaters and field controllers. Instead of a railroad environment, 12 individual parking-lots are used for field test environment. As a result, in the condition of the designed system and the test environment, it is assumed that under 200 passing vehicles(train or tram) per day can be processed only with solar energy.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1163-1168
• /
• 2008

Automatic Train Protection(ATP) System is developed by ETCS(European Train Control System) CONSORTIUM for unify Europe railway system. ATP system is composed of Eurobalise and EuroATC. Nowadays, Korea construct ATP system in conventional line and new electrical locomotives also install ATP system. It is important to verify quality which form checklist during Factory Acceptance Test at beyond the seas. In this paper, review the process, test item, norm and checklist for the Balise Transmission Module, Compact Antenna Unit, Vehicle Control Unit and Communication Controller at the Plymouth Bombardier and Vasteras enics factory.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.8
• /
• pp.743-750
• /
• 2016

The conventional track to train communication is commonly using radio based equipment such as transponder or balise to transmit the data. However, there are some drawbacks of the conventional equipment, for example multipath fading, source of bandwidth limitation, and interference from other users. Moreover, the radio based equipment is very expensive when installed in large numbers. To address these problems, we propose infrared system for trackside to train communication system. Infrared system offers a transmission of data to train and it can be processed to obtain at least a train location. Infrared communication protocol provides practical wireless data communication for direct dedication configuration. Furthermore, on the pole configuration the infrared system provides an abundant bandwidth, an economically sensible, minimalized installation of equipment on the trackside and reliability for heavy rain environment. This paper concentrates on the communication function and measurement performance evaluation. The proposed trackside to train communication system covers about 6 meters between infrared receiver and infrared transmitter, whereas the half angle of the transmitter is set to $19.65^{\circ}$ and the receiver angle is $15^{\circ}$.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.666-670
• /
• 2011

ATS(Automatic Train Stop)s are is effected by track environment, signal distance and train braking distance. So onboard signaling systems such as ATP(Automatic Train Protection) are installed on conventional lines by some train operation companies. With the mixed signalling, the onboard signaling system is overlaid on a conventional line with ATS, it is possible to run the line with conventional trains and ATP trains and to use the advantages of ATP(higher speed or more trains on the line). This paper includes guidelines a mixed signalling(ETCS and ATS) system architecture, operation concepts and infill balise installation.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.69-74
• /
• 2011

In the curving detection method by using an accelerometer, the ride comfort in the first car is worse than one in the others due to spend the time to calculate the tilting command and drive the tilting mechanism after entering in the curve. In order to enhance the ride comfort in the first car, the preditive curve detection method which predicts the distance from a train to the starting point of curve by using the GPS, Tachometer, Ground balise and position DB for track. In this study, we predicted and evaluated the ride comfort for predictive curve detection method in transient curves according to the shape and dimension of transient curve and the various driving speed. Also, we predicted the improvement of the ride comfort for predictive curve detection method by comparing with the result of the ride comfort for predictive curve detection method and for curve detection method using an accelerometer in the short transient curve.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.471-473
• /
• 2004

현재 세계적인 열차제어의 추세는 궤도회로에 의한 고정폐색방식을 이용한 열차 운행이 아닌 발리스 또는 무선통신에 의한 이동권한을 이용한 열차제어방식을 적용하고 있으며, 국내에서도 이에 맞추어 철도청에서는 ATP 사업을 통하여 발리스에 의한 이동권한을 이용한 열차제어시스템을 적용하고 있다. 기존의 궤도회로를 이용한 열차제어시스템에서는 열차를 궤도회로에 의해 검지하였으나 발리스 또는 무선통신에 의한 이동권한을 이용한 열차제어시스템에서는 궤도회로를 사용하지 않기 때문에 이에 패한 새로운 접근이 요구된다. 본 논문에서는 특히 발리스를 이용하였을 때 열차 검지 및 속도 검지를 위한 방안에 대해 연구하였다.