• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.180-184
• /
• 2012

3-way ball valves have been mostly used for high temperature/high pressure valves using in petrochemical carriers and oil tankers, which requires high quality products with confidentiality and durability. As a larger disaster may be generated by leakage of oil or gas from valves, thus the present research applied a numerical analysis method with thermal-structural coupled field analysis and the performance test. The Max stress by parts was confirmed through thermal-structural coupled field analysis and develop the 3-way ball valve design, which is safe on operating condition. And its performance was verified by carrying out pressure test, leakage test and durability test for the manufactured 3-way ball valves with satisfying it's regulations.

• International Journal of Fluid Machinery and Systems
• /
• 제10권1호
• /
• pp.40-46
• /
• 2017

Small valves including ball valves, gate valves and butterfly valves have been adopted in the fields of steam power generation, petrochemical industry, carriers, and oil tankers. Butterfly valves have normally been applied to fields where in narrow places installing the existing valves such as gate valves and ball valves have proven difficult due to the surrounding area and the heavier of these valves. Butterfly valves are used to control the mass flow of the piping system under low pressure by rotating the circular disk installed inside. The butterfly valve is benefitted by having simpler structure in which the flow is controlled by rotating the disc circular plate along the center axis, whereas the weight of the valve is light compared to the gate valve and ball valve above-mentioned, as there is no additional bracket supporting the valve body. The manufacturing company needs to acquire the performance and life test equipment, in the case of adopting the improving factors to detect leakage and damage on the seat of the valve disc. However, small companies, which are manufacturing the industrial valves, normally sell their products without the life test, which is the reliability test and environment test, because of financial and manpower problems. Furthermore, the failure mode analysis of the products failed in the field is likewise problematic as there is no system collecting the failure data on sites for analyzing the failures of valves. The analyzing and researching process is not arranged systematically because of the financial problem. Therefore this study firstly tried to obtain information about the failure data from the sites, analyzed the failure mode based on the field data collected from the customers, and then obtained field data using measuring equipment. Secondly, we designed and manufactured the performance and life test equipment which also have the real time monitoring system with the naked eye for the butterfly valves. The concept of this equipment can also be adopted by other valves, such as the ball valve, gate valve, and various others. It can be applied to variously sized valves, ranging from 25 mm to large sized valves exceeding 3000 mm. Finally, this study carries out the life test with square wave pressure, using performance and life test equipment. The performance found out that the failures from the real time monitoring system were good. The results of this study can be expanded to the other valves like ball valves, gate valves, and control valves to find out the failure mode using the real time monitoring system for durability and performance tests.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.37-45
• /
• 2014

Ball valves are used as a key element in the process industries. The industrial development of valves has increased steadily, but continued improvement requires high design reliability and long service life. Currently, the development of high performance valves is not easy because of the lack of relevant technology in Korea. Valves are being imported at a level of up to 58 percent of the domestic market, which represents a value of almost 7 million US dollars. Therefore, in this work, the improvement of the design and performance of industrial valves has been studied in an attempt to achieve valves that will have longer service life and better output during operation. The structural stability was evaluated using the ANSYS FSI (Fluid-Structural Interaction) module. Moreover, to obtain maximum product reliability, torque analysis simulation was performed to compare and experimental results. The simulation results were used to predict the change in torque by changes in shape, thereby reducing the time and cost of manufacturing a number of prototypes for experimental validation.

• 한국항해항만학회지
• /
• 제34권7호
• /
• pp.553-558
• /
• 2010

This study presents the optimization design process of a segment ball valve that involves the reduction of the flow resistance coefficient and the satisfaction of the strength requirement. Numerical analysis of fluid flow and structural analysis have been performed to predict the flow resistance coefficient and the maximum stress of a segment ball valve. In this study, a segment ball valve incorporating the advantages of a ball valve and a butterfly valve has been devised. In general, ball valves are installed in a pipe system where tight shut off is required. Butterfly valves having smaller end-to-end dimension than ball valve can be installed in narrow spaces in a pipe system. The metamodels for the shape design of a segment ball valve are built by the response surface method and the Kriging interpolation model.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.1639-1644
• /
• 2015

볼밸브용 볼의 로봇 육성용접시스템에서 포지셔너의 설계 및 구조강도 해석에 관한 연구를 하였다. 포지셔너의 일부분인 터닝 유닛을 모델링하였고, 보로 가정하여 해석을 진행하였다. 볼의 무게가 $9,000kg_f$ 일 때 터닝 유닛에 가해지는 응력이 366.85MPa로 나왔다. 이 값은 재료의 항복강도보다 높은 값이다. 앞의 결과를 토대로 터닝 유닛을 수정하여 모델링을 하였다. 수정된 모델링으로 해석한 결과, 응력의 값은 296.11MPa로 확인되었다. 이 값은 재료의 항복강도보다 낮은 수치이며, 볼의 무게를 버티는 것을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.175-178
• /
• 2007

Valves has been used widely in various industries. There are many purposes for valve usage in a piping system. One of them is to control the flow rate. For a design of ball valves, it is important to know the characteristics of flows inside a ball valve. In this study, the computation fluid dynamics were conducted to observe flow velocity, flow coefficient and pressure distribution using CFX 10 according to the valve angles and uniform incoming velocity.

• 한국기계가공학회지
• /
• 제10권3호
• /
• pp.28-32
• /
• 2011

The safety of transporting equipment in a cryogenic condition is one of important problems under the circumstances that the application weight of natural gas is gradually increasing. As a larger disaster may be generated by leakage of oil or gas from valves in case of fire occurrence of a ship, the present research applied a numerical analysis method on thermal stress distribution and deformation, etc. to the design of ball valves satisfying fire safety test's specification(API607) to prevent this. In addition, the present research progressed fire safety tests and compared the test result with numerical analysis results. The Max stress by parts was confirmed through thermal analysis of major parts to evaluate safety. The fire safety test was progressed according to the regulation of API607.

• 한국유체기계학회 논문집
• /
• 제19권4호
• /
• pp.39-42
• /
• 2016

A PFA lined ball valve, which is machined with fluorinated resin PFA to its inner part for improving corrosion resistance, non-stickness, heat-resistance, has been widely used to the chemical/pharmaceutical industries, the semiconductor/LCD manufacturing processes, etc. with the high purity chemicals as working fluid. EPA stated that 60% of all fugitive emissions come from the valve stem packing in a typical petroleum or chemical processing plant. They monitor regulated components for leaks and maintain seal performance at acceptable levels. Korean industrial standards only deals with the bubble test for in-line leakage of valves, which has the detectable leak rate of $10^{-4}$ [$mbar{\cdot}L{\cdot}s^{-1}$], therefore, it is not sufficient to check fugitive emissions. In this study, we conducted Helium leak detection from a PFA lined ball valve and evaluated fugitive emissions according to ISO 15848-1, which has the detectable leak rate of $10^{-9}$ [$mbar{\cdot}L{\cdot}s^{-1}$], for manufacturing the high-reliable PFA lined ball valves against fugitive emissions.

• 한국산학기술학회논문지
• /
• 제17권12호
• /
• pp.446-452
• /
• 2016

최근 해양, 석유화학 플랜트 등에서는 내마모, 내식성, 내열성이 요구되는 초내열 합금이 기본적인 구조재료로 많이 사용되고 있다. 하지만 고가의 초내열 합금 소재로 밸브를 제작할 때 원가 상승과 가격 경쟁력 저하의 원인이 되고 있다. 이에 유체에 흐르는 특정부위만 육성 용접하는 기술이 효과적인 방법으로 사용되고 있다. 하지만 기존의 볼 육성용접의 경우 사람이 직접 수동으로 작업을 진행하기 때문에 많은 시간이 소요되고 정확한 용접하기 어렵다. 이러한 문제를 해결하기 위해 볼 밸브용 볼 육성용접을 균일하게 할 수 있는 로봇자동화 시스템을 개발하였다. 이 시스템은 용접토치를 장착한 용접용 로봇 6축, 포지셔너 회전을 위한 부가 2축, 제어장치 및 로봇경로는 오프라인 프로그램으로 구성되어 있다. CAD 도면 데이터를 오프라인 프로그램에 입력하여 로봇 교시점과 로봇 구동 소스를 얻을 수 있도록 하였고, 볼 육성용접 궤적은 Matlab을 통해 구현하였다. OLP 시스템을 통해 용접층 두께가 균일하게 얻으므로 용가재의 소모량을 약 20% 절약할 수 있었고, 모재와 용접봉 사이의 아크길이를 일정하게 유지하여 육성용접 불량율을 약 50% 정도 감소시켜 품질을 확보하였다. OLP를 활용한 육성용접 자동화 시스템을 통해 작업소요시간이 88시간에서 41시간으로 단축되어 생산성이 2.58배 향상 되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1087-1090
• /
• 2005

In precision machinery systems for medical and chemical applications, micropumps with a low pulsation have been demanded and investigated for accurate delivery of a small amount of liquid. This study proposes sheet type check valves instead of ball type check valves for PZT pumps and performs some tests on dynamics characteristics of check valves having different design parameter with variable frequency. The selected materials of check valves is NBR, PP film, Polyimide and Stainless steel(SUS304). In the experiment, dynamic characteristics of stainless steel thin plate have better performance than others.