• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.215-217
• /
• 2014

본 논문에서는 ns-3 기반의 IEEE 802.15.4 모의 성능 평가에 대해 기술한다. IT 기술의 발달과 함께 차세대 전력망인 '스마트 그리드'가 대두되고 있다. 이에 따라 무선 센서들 간의 통신을 위해 IEEE 802.15.4 표준 기술이 채택되고 있다. IEEE 802.15.4 표준에는 beacon-enabled mode 와 non beacon-enabled mode 두 가지 채널 접근 기법이 존재하지만 특정 기법의 용도와 목적에 대해서는 구체적으로 명시되지 않는다. 따라서 본 논문에서는 스마트 그리드 환경에서 IEEE 802.15.4 의 두 채널 접근 기법의 성능을 시험하고 beacon-enabled mode 와 non beacon-enabled mode 간의 성능 분석을 통해 beacon-enabled mode 의 효용성에 대하여 연구한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.616-620
• /
• 2006

IEEE 802.15.4 is designed for low-rate wireless personal area networks (LR_WPAN) and it attempts to provide a low data rate, low power, low cost wireless networking on the device-level communication. In this paper, I have established a realistic environment for the effect of collision in nonbeacon-enabled mode and beacon enabled mode. The data throughput and delivery ratio are investigated as the performance metrics.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.561-568
• /
• 2010

Instrumentation radar in a test range has an important role to measure target's TSPI(time, space, position, information). It is well known that it tracks a target stably using a beacon mode. But it may fail to track a target in a certain region using a beacon mode. In this paper, we modeled a simple missile shape similar to ATCMS with two beacon antenna and analyzed an antenna radiation pattern using MLFMM(Multi Level Fast Multipole Method) method. Using the analyzed result of the radiation pattern of the antenna and the attitude data of target, we simulated beacon tracking performance of an instrumentation radar. As a result of simulation, we showed that an instrumentation radar may lose the target because it tracks a area of the beacon antenna pattern.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4A
• /
• pp.365-372
• /
• 2007

In IEEE 802.11b wireless network, stations synchronize themselves to the beacons periodically sent by the access point(AP) when they are running in low power mode. In case of missing beacon due to noise or traffic from neighboring wireless network stations must be awake until they get the next beacon, which causes energy consumption in stations. In this paper, we propose a scheme searching next beacon consuming little energy. The problems of missing beacon in low power mode of IEEE 802.11b wireless interface are described and a new method to reduce energy consumption is proposed. The proposed method is simulated with the network simulator, ns2, and compared with the low power mode of the IEEE 802.11b. The result measured in terms of station's wakeup time shows some enhancement in energy consumption when some errors occur in receiving frames.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.1
• /
• pp.43-52
• /
• 2007

IEEE 802.15.4 specification which defines low-rate wireless personal area network(LR-WPAN) has application to home or building automation, remote control and sensing, intelligent management, environmental monitoring, and so on. Recently, it has been considered as an alternative technology to provide multimedia services such as automation via voice recognition, wireless headset and wireless camera for surveillance. In order to evaluate capability of voice traffic on the IEEE 802.15.4 LR-WPAN, we supposed two scenarios, voice traffic only and coexistence of voice and sensing traffic. For both cases we examined delay and packet loss rate in case of with and without acknowledgement, and various beacon period varying with beacon and superframe order values. In LR-WPAN with voice devices only, total 5 voice devices could be applicable and in the other case, i.e., coexisted cases of voice and sensor devices, a voice device was able to coexist with about 60 sensor devices.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.582-589
• /
• 2016

Multi-mode monopulse system is widely used for satellite terminal like UAV because of high tracking accuracy and low size/weight profile. In order to calculate tracking error, Multi-mode monopulse system utilizes high-order mode signal, and it should have enough C/N(carrier to noise) level therefore tracking system needs narrow band filtering of received satellite beacon signal as much as possible. However, UAV suffers for beacon frequency drift derived from Doppler effect due to satellite figure 8 movement and UAV maneuvering. Therefore wideband signal processing needs to be considered in advance for exact doppler compensation and consequent time delay. In this paper, we propose the multi-stage Digital Signal processing system for beacon signal, which could minimize the signal delay under high Doppler and low C/N condition.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.1
• /
• pp.47-53
• /
• 2004

For the purpose of comparison between the designed coverage and actual coverage of Korean DGPS (Differential Global Position System) beacon stations, we have received the ship‘s positions with states and IDs of their stations on the navigation route of Jeju-Tianjin by automatic selection mode of DGPS receiver and on them of Jeju-Inchun and Jeju-Vladibostok by manual mode. Also in case that some obstructions were on propagation routes from DGPS beacon stations to receiving positions, a restriction on available ranges of DGPS beacon signals was investigated. The results obtained are as follows : 1. The coverage of Korean DGPS beacon stations was designed 100NM (Nautical mails) at 40.0dB(over ${\mu}$V/m). But the actual coverages of them according to their stations and propagation routes were 0.3-3.6 times as wide as designed coverage. 2. In case that the propagation route of beacon signals from DGPS beacon stations was on the sea, the propagation distance of north direction from the stations was longer than south direction. 3. The coverages of Echongdo and Ulungdo stations were 366NM on the yellow sea and 342.3NM on the east sea of Korea respectively, and were widest than any other stations. 4. The coverage of Marado station on the south and yellow seas of Korea was very unstable because of the Halla mountain on the propagation route. Maximum receiving range to be measured by automatic selection mode of DGPS receiver was 145NM on the route of Jeju-Tianjin on June 22-July 1, 2002. Minimum receiving range to be not measured by manual selection mode was 28.7NM on the route of Jeju-Inchun on June 26-28, 2003

• The Journal of Society for e-Business Studies
• /
• v.15 no.4
• /
• pp.49-58
• /
• 2010

The wireless sensor network technology becomes one of core technologies to make it possible to implement various e-business applications. Energy efficiency is an important issue in wireless sensor networks. IEEE 802.15.4, a representative international standard for wireless sensor networks, provides the beacon enabled mode for energy-efficient communication. However, the beacons may conflict each other when the network is of multi-hop topology such as mesh or cluster-tree topology with beacon-enabled mode. The beacon conflict causes the failure of synchronization between sensor nodes, and affects other nodes in the network in that unsynchronized nodes cannot participate in communication. In this paper, we suggest an energy-efficient beacon scheduling for the wireless sensor networks. Nodes can save their energy duringperiod and prevent beacon conflict using beacon scheduling. We implement the scheduling using QualNet, and evaluate the performance under mesh topology networks. It turns out that the proposed scheduling may improve the energy efficiency in the networks.

• Journal of Internet Computing and Services
• /
• v.9 no.2
• /
• pp.43-50
• /
• 2008

In IEEE 802.11b wireless LAN, stations keep synchronization by receiving beacons being periodically sent by the AP (access point) when they run in low power mode. Beacon transmission is delayed if wireless channel is busy at a scheduled TBTT (target beacon transmission time), and stations must be awake until they receive the delayed beacon. In this paper, we propose a scheme that stations get their transmission delayed if they have little time for successful data transmission by the next TBTT. Beacon transmission without delay is guaranteed at every TBTT with this method so that the awake time of low power stations to receive beacon can be reduced. The proposed method is simulated and its characteristics ore described with the analysis of the results. The measured results in terms of beacon delay show some enhancement in energy consumption.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.280-285
• /
• 2008

ZigBee is Low Power and Low Data Rate Wireless Communication protocol. It apply to much Ubiquitous Sensor Network. ZigBee PAN is two type PAN. One is Beacon Enabled PAN, the other is Non Beacon Enabled PAN. To support Low Power in Non Beacon Enabled PAN, End-Device enter Active status at End-Device's wishing time and send a data. So, Router does not know End-Device sends a data time. To solving this problem, Router must always exist to Active status. In this case, Router receive a power supply always in Non Beacon Enabled PAN. But Router does not receive a power supply always, Router can not normal operation, such as Router use a battery. To solve this problem, Router will be support low power. In this paper, we will present Router's Low Power Algorithm. And we suggest 'PAN Time'. Device use 'PAN Time' for PAN synchronous. Router using Low Power Algorithm can be enter to inactive status. So Non Beacon Enabled PAN of Router support the low power mode Therefore Router does not receive a power supply always, Router can normal operation.