• Journal of electromagnetic engineering and science
• /
• v.3 no.1
• /
• pp.62-66
• /
• 2003

Novel coupled line phase shifters and its equivalent phase delay line for compact broadband phased array antennas are proposed. These phase control circuits are designed to be less complex, small size and to use a less number of active devices. The phase shifter is able to control a 120$^{\circ}$ phase shift continuously, and the phase delay line for a reference phase has a fixed 60$^{\circ}$ shifted phase. Both have the low phase error of less than $\pm$3.5$^{\circ}$ and the low gain variations of less than 1 ㏈ within the 300 MHz bandwidth. These proposed circuits are adequate to form the efficient beam-forming networks with compactness, broadband, less complexity, and low cost.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2447-2458
• /
• 2009

Ad hoc wireless networks operate without any infrastructure where a node can be a source and a router at the same time. This indispensably requires high throughput and low delay performance throughout the wireless network coverage span, particularly under heavy traffic conditions. Recent research on using multiple antennas in beam-forming or multiplexing modes over a wireless channel has shown promising results in terms of high throughput and low delay. Directional antennas have shown to increase spatial reuse by allowing multiple transmitters and receivers to communicate using. directional beams as long as they do not significantly interfere with each other. However directional antenna performance asymptotically approaches the omni-directional performance in a high density ad hoc network. Simulation results in QualNet validate that average throughput and packet corruption ratio of directional antenna approach omni-directional performance. Moreover, we further highlight some important issues pertaining to the directional antenna performance in wireless networks.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.258-262
• /
• 2005

An adaptive beamforming system based on code filtering and differential correlation approaches is proposed. The differential correlation method was originally proposed for time delay estimation of direct sequence code division multiple access (DS-CDMA) systems under near-far ratio conditions and the code filtering correlation algorithm, on the other hand, was proposed for array response estimation in DS-CDMA systems under perfect power control. In this paper, by combining differential correlation concept with the code filtering beamforming technology, an accurate estimate of the beam forming weights and an enhanced performance of DS-CDMA systems under sever near-far ratio conditions is achieved. The system performance in terms of beam pattern and bit-error-rate (HER) shows that the proposed adaptive beamformer outperforms the conventional code filtering correlation technique.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.765-766
• /
• 2008

In this paper, It has been emphasized of important path access during transmit of node when each node transmit broadcast service which one's of new MANET (Mobile Ad hoc Networks) of autonomy and mobility network structures. It has proposed analysis methods are hierarchical path structure of transmit which experience context aware through confidence to network connectivity alone as issue which can be reduce duplicate of beam forming on networks and maintenance one's of method got to optimized of transmission network that status information of context awareness using ad hoc ODDMRP(Ontology Doppler effect Dynamic Multicast Routing Protocol) path method.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.105-110
• /
• 2015

This paper presents a $4{\times}1$ beam-forming reader antenna system for a new type of RFID based train position detection technology. The required beamwidth of the reader antenna is analytically expressed for different train speeds. The proposed antenna system consists of four rectangular patch elements and two switching couplers which are designed, without any impedance matching networks, for two different antenna modes. The switching coupler is a rectangular quadrature coupler with Pin diodes connecting its center line and the ground plane. The beamwidth of the antenna when the diodes are off and on is $18^{\circ}$ and $39^{\circ}$, respectively. The proposed antenna system will be used for a real train test in the near future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.890-893
• /
• 2008

자율성 및 이동성 갖는 네트워크 구조의 하나인 MANET(Mobile Ad-Hoc Networks)은 각 node들은 그 특성에 따라서 clustering service을 한다. node의 전송과정 중 path access에 대하여 중요성 또한 강조되고 있다. 일반적인 무선 네트워크 상에서의 node들은 clustering을 하게 되는데 그 과정에서 발생되는 여러 가지 문제점을 가지고 전송이 이루어진다. 모든 node들이 송, 수신상의 전송 범위(Beam forming area)가지고 있으며, 이러한 각 node들의 전송범위 내에 전송이 이루어지는 전통적인 전송기술 mechanism을 찾는다. 이러한 전송상황에서의 송신하는 node와 수신된 node간에 발생되고 있는 중복성의 문제점으로 즉, 상호적용에 의한 네트워크 duplicate(overlapping)이 크게 우려가 되고 있다. 이러한 전송상의 전송 범위 중첩, node간의 packet 간섭현상, packet의 중복수신 및 broadcasting의 storming현상이 나타난다. 따라서 본 논문에서는 상황정보의 속성을 이용한 계층적 상호 head node들의 접근된 위치와 연계되는 전송속도, 보존하고 있는 head node들의 에너지 source value, doppler효과를 통한 head node의 이동방향 등 분석한다. 분석된 방법으로 전송상의 계층적 path가 구성된 경험적 path 속성을 통한 네트워크 connectivity 신뢰성을 극대화 할 뿐만 아니라 네트워크의 전송 범위 duplicate을 사전에 줄일 수 있고 전송망의 최적화를 유지할 수 있는 기법의 하나인 상황정보를 이용한 ad hoc network의 ODDMRP(Ontology Doppler effect-based Dynamic Multicast Routing Protocol) clustering 기법을 제안한다.

• Journal of Communications and Networks
• /
• v.15 no.4
• /
• pp.362-369
• /
• 2013

The optimal number of users achieving the maximum sum throughput is analyzed in zero-forcing (ZF) based multiuser multiple-input multiple-output (MIMO) systems with a large number of base station (BS) antennas. By utilizing deterministic ergodic sum rates for the ZF-beam forming (ZF-BF) and ZF-receiver (ZF-R) with a large number of BS antennas [1], [2], we can obtain the ergodic sum throughputs for the ZF-BF and ZF-R for the uplink and downlink frame structures, respectively. Then, we can also formulate and solve the optimization problems maximizing the ergodic sum throughputs with respect to the number of users. This paper shows that the approximate downlink sum throughput for the ZF-BF is a concave function and the approximate uplink sum throughput for the ZF-R is also a concave function in a feasible range with respect to the number of users. The simulation results verify the analyses and show that the derived numbers of users provide the maximum sum throughputs for the ZF-BF as well as ZF-R in multiuser MIMO systems with a large number of BS antennas.

• Journal of Communications and Networks
• /
• v.15 no.4
• /
• pp.370-382
• /
• 2013

Distributed massive MIMO systems, which have high bandwidth efficiency and can accommodate a tremendous amount of traffic using algorithms such as zero-forcing beam forming (ZFBF), may be deployed in large public venues with the antennas mounted under-floor. In this case the channel gain matrix H can be modeled as a multi-banded matrix, in which off-diagonal entries decay both exponentially due to heavy human penetration loss and polynomially due to free space propagation loss. To enable practical implementation of such systems, we present a multi-banded matrix inversion algorithm that substantially reduces the complexity of ZFBF by keeping the most significant entries in H and the precoding matrix W. We introduce a parameter p to control the sparsity of H and W and thus achieve the tradeoff between the computational complexity and the system throughput. The proposed algorithm includes dense and sparse precoding versions, providing quadratic and linear complexity, respectively, relative to the number of antennas. We present analysis and numerical evaluations to show that the signal-to-interference ratio (SIR) increases linearly with p in dense precoding. In sparse precoding, we demonstrate the necessity of using directional antennas by both analysis and simulations. When the directional antenna gain increases, the resulting SIR increment in sparse precoding increases linearly with p, while the SIR of dense precoding is much less sensitive to changes in p.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.650-656
• /
• 2023

This paper implements a channel model for mmWave bands using an NS-3-based 5G system-level simulator and analyzes the reliability and validity of the implemented model through RF performance verification. The channel model for RF performance verification in the mmWave bands consider parameters such as characteristics defined in 3GPP TR 38.901, beam-forming, antenna configuration, scenarios, among others. Furthermore, the simulation results verify compliance within the ranges permitted by the 3GPP standards and verify reliability in indoor environmental scenarios by exploiting the Radio Environment Map (REM). Therefore, the channel model implemented in this study is applicable to the actual design and establishment of 5G networks, presenting a method to evaluate and validate RF performance by adjusting various parameters.