• Journal of The Geomorphological Association of Korea
• /
• v.25 no.2
• /
• pp.15-29
• /
• 2018

The sediment transport process in a river reflects the process of geomorphological change in the watershed, influencesthe river bed variation and the river channel migration, and is a parametric phenomenon that exhibits a dynamic self-adjusting process. Sediment load is divided into bedload and suspended load depending on the dominant mechanism. Quantitative sediment load is important information for solving river problems. Because it is difficult and time consuming to measure bedload, compared to that ofsuspended load, data on the sediment transport load and the research required for the gravel-bed rivers are insufficient. This study is to analyze the ratio of the bedload to the total sediment load in gravel-bed rivers. The sediment load ratio in gravel-bed rivers increases with the flow rate per unit width, and the rate of the bedload varies more rapidly than the suspended load. The sediment transport efficiency coefficient has been affected by the ratio of the flow depth to the mean diameter of particles and has been dependent on the shear velocity Reynolds number. So $A^{\ast}$ and $B^{\ast}$ are introduced to compensate for the uncertainties such as bed materials, sediment transport, and flow velocity distribution, and the coefficient of bedload ratio has been presented. For the sediment load data in experimental channels and rivers, A* was 3.1. The dominant variables of $B^{\ast}$ were $u_*d_m/{\nu}$ in the gravel-bed and h/dm in the sand-bed. When $B^{\ast}$ the is the same, in the experimental channels the coefficient of bedload ratio was affected by the bed forms, but in the rivers it was of little difference between the gravel-bed and sand-bed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.62-66
• /
• 2010

This study presents velocities of bedload sediment transport in both longitudinal and lateral directions and applied in considering morphological change of straight open channel. The velocities of particle motion have obtained by considering the forces balance acting on particles on the bed between the drag, tangential component of the immersed weight of the particle, and Coulomb's resistive forces. Numerical profiles of particle motion velocities reveals good agreement in comparison between this study and Kovacs and Parker (1994). The evaluated velocities components of particle transport are get used to estimate bedload transport rate in considering morphological change of straight open channel. For the application, numerical solution is applied to laboratory experiment which shows very close solution profiles between this study and observed data of a self-formed straight channel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.807-818
• /
• 2020

In this study, hydrophones using acoustic sensors were used to estimate the amount of bedload discharge in a forested watershed. The reaction characteristics were analyzed through hydrophone flume tests and field tests, and the quantitative bedload discharge was calculated and compared with that measured by a pit sampler. The hydrophone reaction changed the pulse according to the flow rate change, but did not react to standard sand. The pulse was different depending on the particle size and weight, and accordingly, there was a specific channel showing a suitable response. For a hydrophone installed in the field, by using an automatic impact device, the reaction characteristics of each channel were analyzed to confirm normal operation of the sensor and the suitability of the output value of each channel. In addition, a suitable channel was selected for the estimation of bedload discharge. The bedload discharge formula was developed using a hydrophone pulse and the average flow rate, and was compared with the measured data in the pit sampler in the study site. As a result of the study, if a hydrophone is used for monitoring the bedload in forested watersheds, it is considered effective in quantitatively estimating the weight of bedload discharge.

• Ocean and Polar Research
• /
• v.35 no.1
• /
• pp.51-61
• /
• 2013

Two surveys were conducted in January 2006 and September 2007 with multibeam echosounder to investigate the dune shape, migration rate, and bedload transport rate using dune-tracking method on an offshore sand ridge at southern Gyeonggi Bay. The migration rates of dunes range from 1.8 $myr^{-1}$) to 56.0 $myr^{-1}$), at the upper northwestern side of sand ridge towards the southwest direction and from the center of the sand ridge towards the northeast direction respectively. Large (i.e. length 10-100 m) dunes show faster migration (0.3-23.4 $myr^{-1}$) ) than very large (i.e. length > 100 m) dunes because larger dunes have required a larger volume of sediments to be displaced. The decreases in dimensions and migration rates of dunes from the center of sand ridge to the lower part of southeastern side on the sand ridge can be ascribed to the decrease of sandy sediments availability, tidal currents with depth, and the coarsening of surface sediments from the crest of the sand ridge to the trough. Bedload transport rates on the basis of migration rates and dune dimensions decrease from 74.5 $m^2yr^{-1}$) at C transect to 35.6 $m^2yr^{-1}$) at R-02 transect.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.337-338
• /
• 2005

• Proceedings of the KGS Conference
• /
• 2003.11a
• /
• pp.29-33
• /
• 2003

Sandy shoreface에서 외해로 가면서 퇴적물의 입경이 작아지는 퇴적물의 분급이 이루어지고 있다는 것은 잘 알려진 사실이다 (e.g., Inman 1953; Niedoroda et al.,1985; Bailard and Bowen 1981; Guillen and Hoekstra, 1996). 이러한 cross-shore의 퇴적물 입경 분급에 중요한 mechanism은 표층에서 상대적으로 큰 입자들이 bedload로 해안으로 이동하는 반면, 표층에서 높이 부유한 부유 퇴적물이 외해로 운반되는 양 방향 퇴적물 이동이라고 할 수 있다. (중략)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.729-729
• /
• 2005

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.556-560
• /
• 2010

자갈하상 산지하천의 주요 관심사는 소류사 크기 분포와 연계하여 하상재료의 이송에 대한 광범위의 기초자료 확보하는 것이다. 자갈 하상재료가 주를 이루는 강원영동지역 양양남대천의 산지 하천을 대상으로 하상재료를 조사하였다. 산지하천의 소류사 크기를 고려한 소류사 채집기를 설치하고, 호우 발생 이후 측정기에 포획된 소류사의 크기를 파악하기 위해 입도분포를 분석하였다. 두 개의 소류사 측정기는 지남교 지점에 유속이 빠른 우안과 유속이 상대적으로 느린 좌안에 각각 설치하였다. 산지하천 시험구간의 하상재료 분포도는 그림 1과 같으며, 하상재료 평균입경은 184.65mm 이였다. 연구단에서 운영중인 법수치 우량관측소의 관측자료에 따르면, 2009년 11월 1~13일 185mm 강우가 발생하였으며, 11월 11일 7:00경에 최대수위에 따른 첨두유출량 107.23$m^3/s$가 발생하였다. 첨두유출 발생당시 이동한 우안 소류사의 평균입경은 102.88mm 이였고, 좌안 소류사의 평균입경은 66.53mm 이였다(그림 2). 하상재료의 평균입경에 대한 소류사 평균입경을 비교하였을 때, 소류사는 하상재료의 $45.87{\pm}13.92%$ 크기 범위에서 이동함을 확인하였다.

• Journal of Korea Water Resources Association
• /
• v.37 no.12
• /
• pp.1033-1041
• /
• 2004

A 2-dimensional numerical sediment transport model using erosion rates in undisturbed conditions has been developed and applied to calculating the suspended sediment concentrations and bed level changes in the Lower Fox River The model reduces inaccuracy of sediment model by using the accurate erosion rates obtained in a flume (called Sedflume). The flume has been developed to measure erosion rates as a function of sediment depth and at the situation of high shear stresses such as flood event. Both mechanisms of suspended load and bedload transport are included in the model. The model results were verified for the description of sediment transport in a straight channel and the sediment transport during flood event in the Lower Fox River The results of Lower Fox River simulation showed good agreements with the observed SS concentrations. This model can be used to simulate sediment transport under the high shear conditions such as flood.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.175-179
• /
• 2012

본 연구에서는 실제 하천에서 유사량을 산정하기 위해 유량의 횡분배법을 활용하는 방법을 제시하였다. 유량의 횡분배법은 Shiono and Knight (1990)가 제안한 방법으로, 하천의 한 측점에서 유량 및 수위가 결정된 경우 지배방정식의 해석을 통하여 횡방향으로 단위 폭 당 유량과 수심적분 유속을 구하는 방법이다. 제안된 방법을 Camenen et al. (2012)의 측정 자료에 적용하였다. Camenen et al. (2012)은 Slovakia의 Danube River에서 basket type bedload sampler를 이용하여 Gabicikovo 발전소 하류 지점에서 소류사를 채취하였다. 유량 횡분배법에 의해 계산된 수리량에 기초하여 modified Meyer-Peter and Muller 공식 (Wong and Parker, 2006)과 Camenen and Larson (2005)공식을 이용하여 횡방향 소류사 분포와 총 소류사량을 계산하였다. 제시된 소류사량 산정 기법을 Danube River의 소류사 측정 자료를 통해 검증하였다.