• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.4
• /
• pp.41-49
• /
• 2008

Thermoelectric properties of the n-type Bi-Te and the p-type Bi-Sb-Te films were measured and the growth behaviors of the electrodeposited Bi-Te and Bi-Sb-Te nanowires were characterized. Filling ratios of 81% and 77% were obtained for electrodeposition of the Bi-Te and the Bi-Sb-Te nanowires, respectively, into the nano pores of 200 nm-diameter of an alumina template. A thermoelectric module, composed of the Bi-Te nanowires and the Bi-Sb-Te nanowires was processed by electrodeposition, and a resistance value of $15{\Omega}$ was measured between the Ni electrodes formed on the Bi-Te nanowires and the Bi-Sb-Te nanowires of the module.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.4
• /
• pp.89-94
• /
• 2010

Bi-Te films were processed by coevaporation of Bi and Te dual sources with variations of the mole ratio of the Bi and Te evaporation sources, and thermoelectric properties of the coevaporated Bi-Te films were characterized. The coevaporated Bi-Te films were n-type semiconductors and exhibited Seebeck coefficients of $-60{\sim}-80{\mu}V/K$. The Terich Bi-Te film, processed with Bi and Te dual sources of 30 mol% Bi : 70 mol% Te ratio, exhibited a power factor of $5{\times}10^{-4}W/m-K^2$. On the other hand, a power factor of $17.7{\times}10^{-4}W/m-K^2$ was obtained for the Bi-rich film coevaporated using Bi and Te dual sources of 90 mol% Bi : 10 mol% Te ratio.

• Journal of Powder Materials
• /
• v.7 no.1
• /
• pp.6-11
• /
• 2000

Two kinds of Bi2Te3 powders, pure Bi2Te3/2vol.%ZrO2, have been prepared by a mechanical grinding process process. Effect of mixing of the powders on thermoelectric of the sintered body has been investigated by measuring Seebeck Coeffcient, specific electric resistivity and thermal conductivity. With an increase in the weight fraction of the Bi2Te3/2vol.%ZrO2 powder from 0 to 40wt.%. Especially, the figure of merit of the mixedBi2Te3 sintered body increases and thereafter dedreases above 40wt.%. Especially. the figure of merit of the mixed Bi2Te3 sintered bodies with mixing of Bi2Te3/2vol.%ZrO2 powder increased about 1.3time in comparison with the value of the specimen before mixing. Mixing of two kinds of Bi2Te3 powders which have different theramal and electric propertries with each other seemed to be useful methob to increase the figure of merit of Bi2Te3 sintered body.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.2 s.43
• /
• pp.9-15
• /
• 2007

Thermoelectric properties of the electrodeposited Bi-Te films and photoresist process have been investigated to apply for thermoelectric thin film devices. After plating in Bi-Te solutions of 20 mM concentration, which were prepared by dissolving $Bi_2O_3$ and $TeO_2$ into 1M $HNO_3$, thermoelectric properties of the films were characterized with variation of the Te/(Bi+Te) ratio in a plating solution. With increasing the Te/(Bi+Te) ratio in the plating solution from 0.5 to 0.65, Seebeck coefficient of Bi-Te films changed from $-59{\mu}V/K$ to $-48{\mu}V/K$ and electrical resistivity was lowered from $1m{\Omega}-cm$ to $0.8m{\Omega}-cm$ due to the increase in the electron concentration. Maximum power factor of $3.5{\times}10^{-4}W/K^2-m$ was obtained for the Bi-Te film with the $Bi_2Te_3$ stoichiometric composition. Using multilayer overhang process, the photoresist pattern to form thermoelectric legs of 30 m depth and 100m diameter was successfully fabricated fur micro thermoelectric device applications.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.741-742
• /
• 2011

XRD 결과와 TEM 분석으로부터 열처리효과에 따른 Bi-Te 박막의 미세구조 변화를 확인하였다. $Bi_2Te_3$ 상이 $SiO_2$ 와 Bi-Te 박막의 경계면을 따라서 성장하였고 이는 열전성능에 중요한 영향을 미치는 것을 확인하였다.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1223-1224
• /
• 2006

The p-type $(Bi_{0.2}Sb_{0.8})_2Te_3/(Pb_{0.7}Sn_{0.3})$Te functional gradient material (FGM) was fabricated by hot-pressing the mechanically alloyed $(Bi_{0.2}Sb_{0.8})_2Te_3$ and the 0.5 at% $Na_2Te-doped$ $(Pb_{0.7}Sn_{0.3})Te$ powders. Also, the n-type $Bi_2(Te_{0.9}Se_{0.1})_3/PbTe$ FGM was processed by hot-pressing the mechanically alloyed $Bi_2(Te_{0.9}Se_{0.1})_3$ and the 0.3 wt% Bi-doped PbTe powders. With ${\Delta}T$ larger than $300^{\circ}C$, the p-type $(Bi_{0.2}Sb_{0.8})_2Te_3/(Pb_{0.7}Sn_{0.3})Te$ FGM exhibited larger thermoelectric output power than those of the $(Bi_{0.2}Sb_{0.8})_2Te_3$ and the 0.5 at% $Na_2Te-doped$ $(Pb_{0.7}Sn_{0.3})Te$ alloys. For the n-type $Bi_2(Te_{0.9}Se_{0.1})_3/PbTe$ FGM, the thermoelectric output power superior to those of the $Bi_2(Te_{0.9}Se_{0.1})_3$ and the 0.3 wt% Bi-doped PbTe was predicted at ${\Delta}T$ larger than $300^{\circ}C$.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.353-359
• /
• 2000

$(Bi_{0.15}Sb_{0.85})_2Te_3$ and $(Bi_{1-x}Sb_x)_2Te_3$ thermoelectric thin films were prepared by magnetron sputtering process, and their thermoelectric characteristics were investigated with variation of the sputtering condition and the $Sb_2Te_3$ content. The $(Bi_{0.15}Sb_{0.85})_2Te_3$ film, deposited by DC sputtering at $300^{\circ}C$ with rotating the Corning glass substrate at 10 rpm, was fully crystallized to $(Bi,Sb)_2Te_3$ phase with c-axis preferred orientation. This $(Bi_{0.15}Sb_{0.85})_2Te_3$ film exhibited the Seebeck coefficient of 185 $\mu$V/K which was higher than the values of other $(Bi_{0.15}Sb_{0.85})_2Te_3$ films fabricated with different sputtering conditions. With increasing the $Sb_2Te_3$ content, the Seebeck coefficient and electrical resistivity of p-type $(Bi_{1-x}Sb_x)_2Te_3$ (0.77$\leq$x$\leq$1.0) film were lowered. Among p-type $(Bi_{1-x}Sb_x)_2Te_3$ films, a maximum power factor of $0.79{\times}10^{-3}W/K^2-m$ was obtained at (Bi_{0.05}Sb_{0.95})_2Te_3$ composition..

• Journal of the Korean institute of surface engineering
• /
• v.49 no.1
• /
• pp.40-45
• /
• 2016

Recently, $Bi_2Te_3$-based alloys are the best thermoelectric materials near to room temperature, so it has been researched to achieve increased figure of merit(ZT). Ternary compounds such as Bi-Te-Se and Bi-Sb-Te have higher thermoelectric property than binary compound Bi-Te and Sb-Te, respectively. Compared to DC plating method, pulsed electrodeposition is able to control parameters including average current density, and on/off pulse time etc. Thereby the morphology and properties of the films can be improved. In this study, we electrodeposited n-type ternary Cu-doped $Bi_2(Te-Se)_3$ thin film by modified pulse technique at room temperature. To further enhance thermoelectric properties of $Bi_2(Te-Se)_3$ thin film, we optimized Cu doping concentration in $Bi_2(Te-Se)_3$ thin film and correlated it to electrical and thermoelectric properties. Thus, the crystal, electrical, and thermoelectric properties of electrodeposited $Bi_2(Te-Se)_3$ thin film were characterized the XRD, SEM, EDS, Seebeck measurement, and Hall effect measurement, respectively. As a result, the thermoelectric properties of Cu-doped $Bi_2(Te-Se)_3$ thin films were observed that the Seebeck coefficient is $-101.2{\mu}V/K$ and the power factor is $1412.6{\mu}W/mK^2$ at 10 mg of Cu weight. The power factor of Cu-doped $Bi_2(Te-Se)_3$ thin film is 1.4 times higher than undoped $Bi_2(Te-Se)_3$ thin film.

• Korean Journal of Metals and Materials
• /
• v.47 no.4
• /
• pp.248-255
• /
• 2009

A micro thermoelectric device was processed by electroplating the n-type Bi-Te nanowires and ptype Sb-Te nanowires into an alumina template with 200 nm pores. Power generation characteristics of the micro devices composed of the Bi-Te nanowires, the Sb-Te nanowires, and both the Bi-Te and the Sb-Te nanowires were analyzed with applying a temperature difference of $40^{\circ}C$ across the devices along the thickness direction. The n-type Bi-Te and the p-type Sb-Te nanowire devices exhibited thermoelectric power outputs of $3.8{\times}10^{-10}W$ and $4.8{\times}10^{-10}W$, respectively. The output power of the device composed of both the Bi-Te and the Sb-Te nanowires decreased to $1.4{\times}10^{-10}W$ due to a large electrical resistance of the Cu electrode connecting the Bi-Te nanowire array with the Sb-Te nanowire array.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03a
• /
• pp.11-11
• /
• 2010

In order to design for nano structured materials with enhanced thermoelectric properties, the alloys in the pseudo-binary $Bi_2Te_3$-PbTe system were investigated for their micro structure and thermal properties. For this synthesis the liquid alloys were cooled by water quenching method. The micro structure images were taken by using electron probe micro analyzer (EPMA). Dendritic and lamellar structures were clearly observed with the variation in the composition ratio between $Bi_2Te_3$ and PbTe. It was confirmed that a metastable compounds is $PbBi_2Te_4$ in the The $Bi_2Te_3$-PbTe system. The change in the composition increasing $Bi_2Te_3$ ratio causes to change structure from dendritic to lamellar. Seebeck coefficient of alloys 5 which the mixture rate of $Bi_2Te_3$ is 83% was measured as the highest value. In contrast, the others decreased by increasing $Bi_2Te_3$. n-type characteristics was observed at all condition except alloy 6 which $Bi_2Te_3$ ration is 91%. The power factors of all samples were calculated with Seebeck coefficient and resistivity. Also the thermal conductivity was measured by using laser flash analyzer (LFA). In this work, the microstructures and thermal properties have been measured as a function of ratio of $Bi_2Te_3$ in the $Bi_2Te_3$-PbTe system.