• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.509-512
• /
• 2006

We have many environmental problems by the polluted materials as a results of mechanical development these days. So people want to use building products made from natural things and take a good effect for people from those bio products. We can instance electron wave shelding, far infrared ray and anion emission, and anti-bacterial property as the latest trend of the bio building material. So we had a experiment to investigate how much bio materials affect concrete when we use in the concrete with cement substitution. We tested slump, 7days compressive strength, and air contents for physical properties of bio concrete. The result is that bio concretes with four bio ingredients have proper values comparing with target values for slump and air content but lower compressive strength than plain concrete.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.39-45
• /
• 2013

PURPOSES : The objective of this study is to evaluate the mechanical characteristics of castor oil based bio-polymer concrete for use of ultra thin overlays. METHODS : To evaluate the mechanical properties of bio-polymer concrete, the various laboratory tests including compressive, tensile, and flexural strength, and elongation tests were conducted on bio-polymer concrete specimens in this study. The mechanical characteristics of bio-polymer concretes were examined by changing the content of hardener and polymer binder to determine the optimum content for ultra-thin overlays. The bio-polymer concrete developed in this study was used for field trial test of the ultra-thin bridge deck pavement for verifying the workability and monitoring the long-term performance of materials. RESULTS : Test results showed that tensile and the flexural strength of bio-polymer concretes increase and the elongation of bio-polymer concrete decreases with increase of binder content. A field adhesive strength tests conducted on bridge deck pavement indicates the bio-polymer concrete has more than 2MPa of adhesive strength satisfy with the design criteria. CONCLUSIONS : The bio-polymer concrete with more than 20% content of castor oil was developed for ultra-thin overlays in this study. It is found from this study that the 35% of hardener content is most appropriate for maintaining the strength characteristics and flexibility.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.441-444
• /
• 2008

본 연구는 콘크리트 구조물의 유지관리 및 보전활동의 절력화(節力化)와 장기 수명화를 목적으로 콘크리트에 발생하는 미세한 균열에도 수시의 점검이 가능해지도록 콘크리트 그 자체에 자기 수복 기능을 부여하는 것에 관한 연구이다. 현재 국외 전문 학술지를 통해 제안되고 있는 자기 수복 콘크리트를 조사해 각각의 특징이나 앞으로의 해결과제에 대해 고찰하였으며, 지금까지와는 완전히 다른 방법으로 박테리아의 생화학 반응을 이용한 자기 수복 콘크리트 개발에 관한 기초연구로서, 생물이 자신의 몸 내외에 광물(Bio-mineral)을 만들어 내는 작용. 즉, 생체 광물 형성 작용(Bio-mineralization)을 이용하여 콘크리트의 개질(改質) 및 성능향상을 목적으로 한 새로운 가능성에 대한 내용이다. 여기에서는 Bacillus pasteurii등의 박테리아가 탄산칼슘을 석출시키는 Bio-mineralization을 이용한다고 하는 새로운 발상으로부터의 콘크리트 역학적 성능 및 내구성의 향상, 균열의 보수등의 가능성에 대한 검토를 소개하고, 기초적 실험을 통해 향후 행해져야 할 연구의 방향성이나 자기 수복 콘크리트의 발전 가능성에 대해 연구하였다.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.75-79
• /
• 2013

PURPOSES : The objective of this study is to evaluate the environmental resistance of bio-polymer concrete for use of pavement materials developed for reducing the carbon-dioxide. METHODS : The compression, tension, and bending strength tests were conducted on the bio-polymer concrete specimens with and without environmental conditioning. The specimens were conditioned using the freezing-thaw and accelerated weathering process for long period of time. To assess the resistance against chloride, the chloride ion penetration resistance tests were carried out on the bio-polymer concrete specimens. RESULTS : Test results show that the maximum difference in strength between specimens with and without conditioning is about 2.6MPa indicating that the effect of environmental conditioning on specimen strength is negligible. Based on the chloride ion penetration resistance test, the penetration quantity of electric charge of the specimens is zero and there is no ion penetration within the bio-polymer concrete. CONCLUSIONS : It is found from this study that there is slight change in strength of bio-polymer concretes before and after environmental conditioning process and no chloride ion penetration observed in these specimens. Therefore, the developed bio-polymer concretes can be applied effectively as pavement materials due to the small change of physical properties with environment change.

• 방사성폐기물학회지
• /
• 제19권1호
• /
• pp.133-140
• /
• 2021

This study evaluates the radioactivity of concrete waste that occurs due to large amounts of decommissioned nuclear wastes and then determines the surface dose rate when the waste is packaged in a disposal container. The radiation assessment was conducted under the presumption that impurities included in the bio-shielded concrete contain the highest amount of radioactivity among all the concrete wastes. Neutron flux was applied using the simplified model approach in a sample containing the most Co and Eu impurities, and a maximum of 9.8×104 Bq·g-1 60Co and 2.63×105 Bq·g-1 152Eu was determined. Subsequently, the surface dose rate of the container was measured assuming that the bio-shield concrete waste would be packaged in a newly developed disposal container. Results showed that most of the concrete wastes with a depth of 20 cm or higher from the concrete surface was found to have less than 1.8 mSv·hr-1 in the surface dose of the new-type disposal container. Hence, when bio-shielded concrete wastes, having the highest radioactivity, is disposed in the new disposal container, it satisfies the limit of the surface dose rate (i.e., 2 mSv·hr-1) as per global standards.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.17-18
• /
• 2017

This study is to provide a evaluation method for the penetration depth of emulsified refined bio diesel(ERBD)applied to a surface of the concrete by using water absorption capability of the concrete. The concrete applied with ERBD was immersed at water for 1 min., 5min., and 10 min. and then was checked the brightness with elapse of time. Test results indicated that there was clear difference between ERBD part and non ERBD part in concrete specimen after measuring the brightness until 120min.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.445-451
• /
• 2019

본 연구에서는 콘크리트 교면포장 재료로서 사용되는 라텍스의 단점인 경제성을 보완하고 자원재활용을 위해 괭생이모자반 기반의 자원순환형 폴리머 혼입에 따른 내구성능을 분석하였다. 본 연구 범위의 모든 배합조건에서 슬럼프 및 공기량은 품질기준은 만족하는 것으로 나타났으나, 분말 형태의 자원순환형 바이오 폴리머 적용시 슬럼프가 일부 저하되는 경향을 나타내었다. 압축강도 시험결과, 라텍스 혼입시 강도가 감소되었지만 바이오 폴리머 대체시 혼입율에 따라 6.3~24.4%의 강도 개선효과를 나타내었다. 내구성능 시험결과, 합성 폴리머 혼입시 가장 우수한 내구성능을 나타내었고, 바이오 폴리머 혼입시에는 혼입율이 증가할수록 내구성능이 우수한 경향을 나타내었지만 라텍스보다는 미소하게 낮은 것으로 확인되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권3호
• /
• pp.67-74
• /
• 2012

바이오매스에서 얻어지는 바이오차는 토질 개량제와 탄소 격리제로 제한적인 분야에서 성공적으로 사용되고 있다. 현재 산업전반에서 CO2 에 의한 환경에 부정적인 영향을 완화시키고 지속가능성을 증진시키기 위한 연구가 활발히 진행되고 있다. 이에 본 연구에서는 고탄소 바이오차를 탄소 격리제 또는 시멘트의 혼화재로써 활용 가능성을 평가하고자 하였다. 견목재에서 얻어진 바이오차를 혼화재로 사용하여 시멘트 배합조건을 달리하면서 모타르의 압축강도, 마이크로구조, 압축강도, 유동성, 중량감소와 같은 화학적, 물리적 재료성질을 평가하였다. 또한 플리이애쉬를 사용한 모르타르의 역학적 특성과 비교 평가하였다.

• 콘크리트학회지
• /
• 제27권1호
• /
• pp.27-30
• /
• 2015

• 한국농공학회논문집
• /
• 제64권4호
• /
• pp.65-72
• /
• 2022

For sustainable development in the construction industry, blast furnace slag has been used as a substitute for cement in concrete. In contrast, ferronickel slag, which is the by-product generated during smelting to ferronickel used in the manufacturing of stainless steel and nickel alloys, has a limitation to use as a binder and an aggregate due to its expansive characteristics. Recently, stabilization technology of ferronickel slag has been improved and studies have been carried out to utilize ferronicke slag as fine aggregate in concrete. Therefore, in this study, basic mechanical properties of concrete used in ferronickel slag aggregate was evaluated. The compressive strength (24, 30, 40 MPa) and replacement rate of ferronickel slag aggregate (0, 10, 25, 50%) were considered as experimental variables. As a result of test, concrete replaced fine aggregate with 25% ferronickel slag aggregate showed superior performance in the compressive strength and flexural strength.