• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.4
• /
• pp.495-501
• /
• 2013

Purpose: This study was to develop golf range finder which could measure exact distance from golfer to flag by using telescope and biprism. Methods: Golf range finder was made that included telescope and biprism which could move in the telescope, and an accuracy of the range finder was analyzed in distance range 20~200 m. Results: An equation was made for measuring distance which was related at position of biprism, and we could measure distance successfully by using developed golf range finder. Biprism of 2 ${\Delta}$ was useful to measure in short distance but it had bad accuracy in long distance, and 0.5 ${\Delta}$ was more useful in long distance. Image got worse when the biprism approch to focal point of objective lens for measurement in long distance, so we developed multi-layer biprism to prevent the weak point. Conclusions: Image stabilization by biprism for measuring distance was confirmed. Even if hand was moving, the distance could be measured well by using biprism, and we could find that the induced equation for distance measurement was useful. We found that multi-layer biprism, which is was new developed, was more useful than general biprism when the biprism approched to focal point of objective lens for measurement in long distance.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.2
• /
• pp.167-175
• /
• 2015

Purpose: The new-type rangefinder, which is using the biprism principle, is introduced to develop the range finder which can be easily carried by soldiers, and in order to realize those technologies specifically, we try to develop a scope for military rangefinder by doing optical design which can secure enough space to move the biprism. Methods: After setting up the verious initial condition to realize two kinds of goals, that are the securement of enough space to move the biprism and the easy-exchangeability of two kinds of biprisms, and then the optical system was optimized by using optical design program CodeV in order to minimize the finite ray aberrations. Results: We designed the biprism housing to makes it possible to swap the two kinds of biprisms. It was appeared that the Schmidt prism is suitable as erecting prism which can make sure the space to move the biprism. 16.5 mm was good for the face length of Schmidt prism. The optical system with a Schmidt prism and a biprism was designed, and the finite ray aberrations was minimized. Conclusions: We developed a 5X scope for an optical rangefinder using a biprism and a Schmidt prism with 16.5 mm face length. This scope is valid for the optical system which has the effective field angle of ${\pm}3.6^{\circ}$, and the finite ray aberrations are well controlled within the ${\pm}8.95^{\prime}$.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.5
• /
• pp.383-389
• /
• 2000

This paper presents a stereo camera system that provides a Pair of stereo images using a Biprism. The equivalent of a stereo Pair of images is formed as the left and right halves of a single CCD image. The system is therefore cheap and extremely easy to calibrate since it requires only one CCD camera. An additional advantage of the geometrical set-up is that corresponding features lie on the same scanline automatically, The single camera and Biprism have led to a simple stereo system for which correspondence is very easy and which is accurate for nearby objects in a small field of view. Since we use only a single lens, calibration of the system is greatly simplified. Given the parameters in the Biprism-stereo camera system, we can reconstruct the 3-D structure using only the disparity between the corresponding points.

• Journal of Welding and Joining
• /
• v.19 no.2
• /
• pp.200-207
• /
• 2001

Three-diemnsional bead profile was measured using the biprism stereo vision sensor in GMAW, which consists of an optical filter, biprism and CCD camera. Since single CCD camera is used, this system has various advantages over the conventional stereo vision system using two cameras such as finding the corresponding points along the horizontal scanline. In this wort, the biprism stereo vision sensor was designed for the GMAW, and the linear calibration method was proposed to determine the prism and camera parameters. Image processing techniques were employed to find the corresponding point along the pool boundary. The ism-intensity contour corresponding to the pool boundary was found in the pixel order and the filter-based matching algorithm was used to refine the corresponding points in the subpixel order. Predicted bead dimensions were in broad agreements with the measured results under the conditions of spray mode and humping bead.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.892-898
• /
• 2013

A field emission projection microscope was constructed to investigate the atomic and chemical-bonding structure of molecules using electron in-line holography. Fringes of carbon nanotube images were found to be interferograms equivalent to those created by the electron biprism in conventional electron microscopy. By exploiting carbon nanotubes as the filament of the electron biprism, we measured the transverse coherence length of the electron beam from tungsten field emitters. The measurements revealed that a partially coherent electron-beam was emitted from a finite area.

• Proceedings of the KWS Conference
• /
• 2000.10a
• /
• pp.28-30
• /
• 2000

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.325-326
• /
• 2006

• Applied Microscopy
• /
• v.36 no.spc1
• /
• pp.63-69
• /
• 2006

By utilizing a field emission gun and a biprism installed on a transmission electron microscope (TEM), electron holography is extensively carried out to visualize the electric and magnetic fields of nanomaterials. In the electric field analysis, the distribution of electric potential in a sharp tip made of W coated with $ZrO_2$ is visualized by applying the voltage to the tip. Denser contour lines due to the electric potential are observed with an increase in the bias voltage. In the magnetic field analysis by producing the strong magnetic field with a sharp magnetic needle made of a permanent magnet, the in situ experiment is carried out to investigate the magnetization of hard magnetic materials. The results of these experiments clearly demonstrate that electron holography is a promising advanced transmission electron microscopy technique to characterize the electric and magnetic properties of nanomaterials.