• 한국데이터정보과학회:학술대회논문집
• /
• 2006.04a
• /
• pp.49-54
• /
• 2006

When using response surface designs, the experimental trials should be carried out in blocks in case of heterogeneity of conditions. When we use nearly orthogonal blocking, we need evaluate the degree of orthogonal blocking. Graphical methods for evaluating the degree of orthogonal blocking are suggested.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.3
• /
• pp.669-675
• /
• 2006

When using response surface designs, the experimental trials should be carried out in blocks in case of heterogeneity of conditions. When we use nearly orthogonal blocking, we need evaluate the degree of orthogonal blocking. Graphical methods for evaluating the degree of orthogonal blocking are suggested.

• The Korean Journal of Applied Statistics
• /
• v.15 no.1
• /
• pp.179-186
• /
• 2002

We usually execute the blocking under heterogeneity of experimental condition in response surface methodology. We can suggest the measure for evaluating nearly orthogonal blocking under second order models.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.481-485
• /
• 2003

This paper proposes on the blocking method of Internet harmful sex sites by accoustic signal processing. Pre-existing methods mainly focused on directory-based blocking and words-based blocking. But these methods are not completely blocked the Internet harmful sites. Therefore, we propose the content-based blocking method which compose of the image-based blocking and the accoustic-based blocking. In this paper, we mainly deal with the accoustic -based blocking method. Finally, the effectiveness of this system is demonstrated by several experiments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.559-564
• /
• 2011

The UV blocking type pressure-sensitive adhesive sheet was developed by mixing UV blocking reagent with adhesive material, instead of conventional method in which the reagent was mixed with PVC substrate. The blocking performance of the sheet was evaluated by measuring the absorbance in 280-400 nm region. Both organic and inorganic type blocking reagents were examined. The blocking ability of the former is better than that of the later. Only 1% addition of blocking reagents is effective to block UV light without affecting to visibility and tackiness of adhesive tapes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.310.2-310.2
• /
• 2013

For enhancement of dye-sensitized solar cell performance, TiO2 blocking layer has been used to prevent recombination between electron and hole at the conducting oxide and electrolyte interface. In solid state dye-sensitized solar cells, it is necessary to fabricate pin-hole free TiO2 blocking layer. In this work, we deposited the TiO2 blocking layer on conducting oxide by atomic layer deposition and compared the efficiency. To compare the efficiency, we fabricate solid state dye-sensitized solar cell with using CuSCN as hole transport material. We see the efficiency improve with 40nm TiO2 blocking layer and the TiO2 blocking layer morphology was characterized by SEM. Also, we used this blocking layer in TiO2/Sb2S3/ CuSCN solar cell.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.4
• /
• pp.383-390
• /
• 2020

Blue light is a blue-based light existing at a wavelength between 380 and 450 nm, and it has been reported that it induces active oxygen and causes aging, and accordingly, interest in the blue light blocking effect is increasing. In this study, the effects of the polarity of oil, viscosity of the formulation, type of emulsifier, emulsified particles, and inorganic UV blocking agents on the blue light blocking effect in UV blocking products were investigated. As a result, it was confirmed that the blue light blocking rate increased as the polarity of the oil became similar to that of the organic UV blocker, and the higher the viscosity of the formulation, the higher the blue light blocking rate. The types of emulsifiers and emulsified particles had little effect on the blue light blocking effect, and the presence of inorganic UV blocking agents was found to be one of the factors that greatly influenced the blue light blocking rate. These results can effectively increase the efficiency of blocking blue light, and may be used in the development of blue light blocking products and formulation research in the future.

• Journal of Korea Multimedia Society
• /
• v.23 no.3
• /
• pp.430-439
• /
• 2020

The government of the Republic of Korea has introduced SNI blocking method since February 2019 to block illegal sites. Currently, this policy has been considered as a controversial policy in South Korea therefore, about 270,000 South Koreans have been calmed down by and the presidential office petition because people believe that blocking https by SNI would invasion of privacy and freedom of use of the Internet. As soon as the SNI blocking method was used, the bypass method was opened to the Internet, causing side effects. In this study, identifies the development of Internet blocking technology and the development of new technology that bypasses the technology. It also examines Internet censorship in other countries and identifies problems in blocking technology. Through this study would present policy suggestions and technical methodologies for sound Internet use.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.1
• /
• pp.6-11
• /
• 2005

In this paper, two types of vertical SIT(Static Induction Transistor) structures are proposed to improve their electrical characteristics including the blocking voltage. Besides, the two dimensional numerical simulations were carried out using ISE-TCAD to verify the validity of the device and examine the electrical characteristics. First, a trench gate region oxide power SIT device is proposed to improve forward blocking characteristics. Second, a trench gate-source region power SIT device is proposed to obtain more higher forward blocking voltage and forward blocking characteristics at the same size. The two proposed devices have superior electrical characteristics when compared to conventional device. In the proposed trench gate oxide power SIT, the forward blocking voltage is considerably improved by using the vertical trench oxide and the forward blocking voltage is 1.5 times better than that of the conventional vertical power SIT. In the proposed trench gate-source oxide power SIT, it has considerable improvement in forward blocking characteristics which shows 1500V forward blocking voltage at -10V of the gate voltage. Consequently, the proposed trench oxide power SIT has the superior stability and electrical characteristics than the conventional power SIT.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.196-197
• /
• 2006

In this paper, two types of vertical SIT(Static Induction Transistor) structures are proposed to improve their electrical characteristics including the blocking voltage. Besides, the two dimensional numerical simulations were carried out using ISE-TCAD to verify the validity of the device and examine the electrical characteristics. First, a trench gate region oxide power SIT device is proposed to improve forward blocking characteristics. Second, a trench gate-source region power SIT device is proposed to obtain more higher forward blocking voltage and forward blocking characteristics at the same size. The two proposed devices have superior electrical characteristics when compared to conventional device. In the proposed trench gate oxide power SIT, the forward blocking voltage is considerably improved by using the vertical trench oxide and the forward blocking voltage is 1.5 times better than that of the conventional vertical power SIT. In the proposed trench gate-source oxide power SIT, it has considerable improvement in forward blocking characteristics which shows 1500V forward blocking voltage at -10V of the gate voltage. Consequently, the proposed trench oxide power SIT has the superior stability and electrical characteristics than the conventional power SIT.