• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.5
• /
• pp.371-378
• /
• 2015

In this paper, a different type of pulse width modulation (PWM) control scheme for a buck converter is introduced. The proposed buck converter uses PWM with frequency hopping and a low quiescent.current low dropout (LDO) voltage regulator with a power supply rejection ratio enhancer to reduce high spurs, harmonics and output voltage ripples. The low quiescent.current LDO voltage regulator is not described in this paper. A three-bit binary-to-thermometer decoder scheme and voltage ripple controller (VRC) is implemented to achieve low voltage ripple less than 3mV to increase the efficiency of the buck converter. An internal clock that is synchronized to the internal switching frequency is used to set the hopping rate. A center frequency of 2.5MHz was chosen because of the bluetooth low energy (BLE) application. This proposed DC-DC buck converter is available for low-current noise-sensitive loads such as BLE and radio frequency loads in portable communications devices. Thus, a high-efficiency and low-voltage ripple is required. This results in a less than 2% drop in the regulator's efficiency, and a less than 3mV voltage ripple, with -26 dBm peak spur reduction operating in the buck converter.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.3
• /
• pp.103-112
• /
• 2008

In this paper we present two databases for two different systems each having novel implementation ideas: a u-Healthcare system with a mobile gateway and MAGI network monitoring system. u-Healthcare system is capturing and monitoring vital sign data without restrictions of location and time using body sensor network and a mobile gateway. MAGI is a system which has a dynamic firewall function and solves problems of existing traffic monitoring tools. In addition to presenting the design principles behind these two systems, we describe the respective database schemas together with detailed information of the data stored within the databases. We will also show and discuss performance measurements and calculations for both systems. Based on the performance data we will discuss the systems' suitability for their intended uses.

• Korean Journal of Community Nutrition
• /
• v.25 no.1
• /
• pp.13-20
• /
• 2020

Objectives: This study examined the salinity of soups provided at childcare centers by measuring the salinity for three years and providing basic data for sodium reduction. Methods: The soup salinity was measured using a Bluetooth salinity meter from January 2015 to December 2017 at 80 childcare foodservice establishments enrolled in the Suseong Center for Children's Foodservice Management in Daegu. Results: An analysis of the soup salinity each year showed that the salinity decreased significantly from 0.48% in 2015 to 0.41% in 2017, particularly in clear soups and soybean soups compared to other soups (P < 0.05). The salinity and sodium content in seafood soups (0.45% and 179.1 mg/100 g, respectively) were highest, followed by soybean soups (0.44%, 175.2 mg/100 g), with perilla seed soups containing the lowest (0.42%, 167.2 mg/100 g) (P < 0.05). The salinity was significantly higher in institutional foodservice establishments than small foodservice establishments (P < 0.001). The salinity and sodium content were the highest in foodservice establishments with a small number of measurements, and the salinity was the lowest in foodservice establishments with salinity measurements performed an average of 151 times each year (three times a week) or more (P < 0.05). The soup salinity was low in the order of winter, spring, summer, and autumn, and the salinity decreased significantly year by year in all seasons. (P < 0.05). Conclusions: The soup salinity was significantly lower in foodservice establishments where the salinity was measured more than three times a week, indicating that continuous salinity management is effective.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.1
• /
• pp.62-68
• /
• 2016

The fingerprint, which is one of the methods of indoor localization using WiFi, has been frequently studied because of its ability to be implemented via wireless access points. This method has low positioning resolution and high computational complexity compared to other methods, caused by its dependence of reference points in the radio map. In order to compensate for these problems, this paper presents a radio map designed algorithm based on the log-distance path loss model fusing a WiFi and BLE fingerprint. The proposed algorithm designs a radio map with variable values using the log-distance path loss model and reduces distance errors using a median filter. The experimental results of the proposed algorithm, compared with existing fingerprinting methods, show that the accuracy of positioning improved by from 2.747 m to 2.112 m, and the computational complexity reduced by a minimum of 33% according to the access points.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.1
• /
• pp.20-29
• /
• 2017

Motion synchronization between developed real and virtual robots for object recognition and target tracking is introduced. ASUS's XTION PRO Live is implemented as a sensor and configured to recognize walls and obstacles, and perceive objects. In order to create virtual reality, Unity 3D is adopted to be associated with the real robot, and the virtual object is controlled by using an input device. A Bluetooth serial communication module is used for wireless communication between the PC and the real robot. The motion information of a virtual object controlled by the user is sent to the robot. Then, the robot moves in the same way as the virtual object according to the motion information. Through motion synchronization, two scenarios, which map the real space and current object information with virtual objects and space, were demonstrated, yielding good agreement between the two spaces.

• Journal of Korean Society of Disaster and Security
• /
• v.9 no.1
• /
• pp.33-38
• /
• 2016

Real time location system was development for safety management at road and bridge maintenance field. The system can check the real-time location detection, movement history, behavior of a number of laborers. The system consisted of a Bluetooth and ZigBee that uses low-power. It had a very large error that the previous method for the position recognition by triangulation using the RSSI. Because This study proposed a new distance measurement and correction scheme using RSSI and accelerometer. It was evaluated in the maintenance field. A development system were evaluated in the field, the results are shown an error between 0.2 m and 0.4 m. And through the acceleration of history it was confirmed by determining possible to determine the safety situation of the laborers.

• Asia pacific journal of information systems
• /
• v.14 no.3
• /
• pp.121-144
• /
• 2004

Developing a personalized system on a user's behalf which is working around the Internet-based marketplace is one of the challenging issues in intelligent e-business, especially mobile commenrce. It has been highly recommended that such a mobile personalized system has to perceive the user's needs a priori by tracking user's current context such as location with activity and then to identify the current needs dynamically and proactively. Automatically and unobtrusively getting user's context is an inevitable feature for the development of autonomous mobile commenrce. However, personalization methodologies and their feasible architectures for context-aware mobile commerce have been so far very rare. Hence, this paper aims to propose a context-aware mobile commerce development methodology by applying agent and semantic web technologies for personalized reminder system, which is one of the mobile commerce support system. We revisited associationism to understand a buyer's need identification process and adopt the process as 'purchase based on association' to implement a personalized reminder system. Based on this approach, we have showed how the agent-based semantic web service system can be used to realize need-aware reminder system. NAMA(Need-Aware Multi-Agent), a prototype system, has been implemented to show the feasibility of the methodology and framework under mobile setting proposed in this paper. NAMA embeds bluetooth-based location tracking module and identify what a user is currently looking at through her/his mobile device such as PDA. Based on these capabilities, NAMA considers the context, user profile with preferences, and information about currently available services, to aware user's current needs and then link her/him to a set of services, which are implemented as web services.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.4
• /
• pp.327-334
• /
• 2013

In August 2012 the first CanSat competition was hosted by the Satellite Research Center of KAIST under auspice of the Ministry of Education, Science and Technology. The present authors team won the first prize in the university session. In this paper the overall procedure of the CanSat project presented from the conceptual design stage to the final launch test. As the compulsory mission CanSat should send GPS data and attitude information to the ground station which in practice was performed via Bluetooth channel. In addition our CanSat is designed to trace the sun for the solar panels supplying electric power of satellite. IMU and servo motors are used for the attitude control in order that the solar sensor of the CanSat is always direct towards the sun. Launching of CanSat was simulated by dropping from a balloon at the height of around 150m via parachute. Launching test results showed that the attitude control of the CanSat and its solar sensing function were successful.

• Journal of the Korean Society of Visualization
• /
• v.14 no.3
• /
• pp.38-45
• /
• 2016

Separation of particles based on different sizes, detection of pathogenic bacteria and isolation of leukocytes from whole blood are typical applications of spiral or helical microchannels. The present study focuses on developing a CD4+ T-cell counting device for monitoring HIV/AIDS patients with the aid of a helical minichannel used for a sample cartridge. For the experiment, $10{\mu}m$ sized microbeads were used for visualization with a fluorescence imaging system. Alignment of microbeads was investigated in a stationary and spinning sample cartridge filled with glycerol-water mixtures of different densities. The helical minichannel was spun using a DC motor controlled by an Arduino board with a Bluetooth shield. It was found that when the sample cartridge was made stationary, no bead alignment was achieved for a medium with density (0% and 20% glycerol) lower than that of the beads, but when it was spun at 2000-3000 rpm for 1-4 min, an alignment was obtained at the top of the channel facilitating optical detection and enumeration of those microbeads. Since an alignment of microbeads was achieved for a medium with density as that of blood plasma, the same approach can be applied for aligning and counting CD4+ T-lymphocytes in whole blood samples collected from patients.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2268-2272
• /
• 2010

This letter presents that a rectenna can utilize more stable wireless power by using a new design dual band/dual polarization microstrip patch antenna and 2 stage voltage multiplier at 2.4 GHz band and 3.1 GHz band. The proposed antenna is a new microstrip patch antenna design to make impedance matching possible by using slotted capacitive coupling between the patch and $50\Omega$ feed line on a ground plane. Its advantage is that the size of the rectenna can be reduced by using $50\Omega$ feed line on the ground plane, which can be used efficiently. The dual band/dual polarization microstrip patch antenna shows circular polarization at 2.4 GHz band and linear polarization at 3.1 GHz band. Under -10 dB return loss, The dual band/dual polarization microstrip patch antenna obtains 340 MHz bandwidth as 2.23~2.57 GHz and 375 MHz bandwidth as 2.95~3.325 GHz. Also, 2 Stage Voltage multiplier is possible to operate at 2.4 GHz band and 3.1 GHz band. The designed retenna can usually obtain wireless power at both 3.1 GHz band, and 2.4 GHz band applications such as Wi-Fi, Bluetooth, Wireless LAN, etc. So more stable wireless power can be utilized at the same time.