• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.93-98
• /
• 2014

Bicycle accidents increase as the number of people riding bicycles increases following the trend try to enhance health and looking for alternative energy sources in the era of high oil price. In bicycle accident cases, physical risk is higher because the impact of the accident has a direct effect on the body of the rider. Therefore, the bicycle rider in an accident might unable to report the accident by themselves, thus, unable to quickly respond to the accident situation. This study developed a system for informing bicycle accidents upon bicycle accident by reporting and texting the accident location using a smart phone application after identifying the accident location using a GPS equipment based on the signal that senses the accident through the system installed in the bicycle for the purpose to improve bicycle riders' safety. This study confirmed the effectiveness of the system developed to quickly respond to the accident to prevent secondary damage through an experiment.

• International journal of advanced smart convergence
• /
• v.6 no.1
• /
• pp.82-88
• /
• 2017

Emergency lights and exit signs are an indispensable part of safety precautions for effective evacuation in case of emergency in public buildings. These emergency sign indicates safe escape routes and emergency doors, using an internationally recognizable sign. However visibility of those signs drops drastically in case of emergency situations like fire smoke, etc. and loss of visibility causes serious problems for safety evacuation. This paper propose a novel emergency light and exit sign built-in with Bluetooth Low Energy (BLE) Beacon to assist the emergency self-guiding evacuation using devices for crisis and emergency management to avoid panic condition inside the buildings. In this approach, the emergency light and exit sign with the BLE beacons deployed in the indoor environments and the smart devices detect their indoor positions, direction to move, and next exit sign position from beacon messages and interact with map server in the Internet / Intranet over the available LTE and/or Wi-Fi network connectivity. The map server generate an optimal emergency exit path according to the nearest emergency exit based on a novel graph generation method for less route computation for each smart device. All emergency exit path data interfaces among three system components, the emergency exit signs, map server, and smart devices, have been defined for modular implementation of our emergency evacuation system. The proposed exit sign experimental system has been deployed and evaluated in real-time building environment thoroughly and gives a good evidence that the modular design of the proposed exit sign system and a novel approach to compute emergency exit path route based on the BLE beacon message, map server, and smart devices is competitive and viable.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.137-143
• /
• 2017

Facilities for pedestrian safety of the visually impaired are scarce on the walkway and crosswalk. Braille blocks are installed on the walkways and RF controlled signal lights and sound generators are installed on the crosswalk at the main intersection for the visually impaired. An RF remote control system using one frequency has a problem of simultaneously operating nearby signal lamps and sound generators at an intersection. In this paper, we develop the smart cane that uses a beacon to identify the signal lamp and sound generators installed on the crosswalk at intersections and to operate the signal lamps and sound generators in the direction of the walk by IR communication. The developed smart cane is able to provide the pedestrian navigation for the blind by interworking with mobile apps through Bluetooth communication.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.751-753
• /
• 2011

Pulse Oximeter is used two different wavelength light sources. Two signals measured by light transmission in the body parts. SPo2 is calculated from the measured signal. These optical methods is have the light absorption properties of oxygen in the blood. SPo2 is to be called vital signs of $5^{th}$and important in modern medical. But, exist pulse oximeter was used just user for viewing the SPo2. That was a lack of used communication Monitoring function. In this paper using the Bluetooth feature on the exist pulse oximeter to communicate with the outside of the Gateway for design medical devices standards protocol IEEE 11073-10404 built-in pulse oximeter. Also user can be monitoring the U-Health Gateway through the pass SPo2 information.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.263-266
• /
• 2011

Drivers check always vehicle state for own safety and is necessary to understand about vehicle state. If driver know vehicle state, because driver request vehicle state at vehicle specialty company, driver pay a lot of money and waste a lot of time. Now, drivers have checked vehicle state by using variety features of smart phone due to progress of IT(Information Technology). but existing smartphone vehicle diagnostic system learned professional knowledge of vehicle and know vehicle state. drives not need vehicle diagnostic. to overcome these disadvantages, there use easily drivers by using smartphone and request system to know own all vehicle state. In this paper, there implement vehicle diagnostic system with smartphone based on android OS to use easily this system and know check information of vehicle supplies replacement cycles, vehicle internal problems, Eco driving by using OBD-II data to receive by OBD-II Protocol convert Bluetooth connector.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.200-202
• /
• 2010

The number of motor vehicle registrations in Korea is increasing steadily each year, driven by industry development and economic growth. The number of traffic accidents is also rapidly increasing. Korea has a relatively high number of traffic accidents among OECD member countries, and it ranks among the highest in traffic accident death rates. This death rate is higher compared to death rates as a proportion of the number of traffic accidents in each country. It is very common for drivers to lose consciousness in traffic collisions, which leads to a failure to carry out early emergency measures. In order to prevent such situations as well as hit-and-runs and people left uncared for after traffic accidents, there is a need for motor vehicle black boxes and accident report systems. This study addressed the need for an emergency evacuation system for people injured in traffic accidents and a secondary traffic accident prevention system by developing a motor vehicle emergency situation detection and report system combined with a black box, and materializing it as an actual system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.7
• /
• pp.407-412
• /
• 2017

This paper introduces a biocompatible packaging system for implantable medical device having a hermetic sealing, such that a perfect physical and chemical isolation between electronic medical system and human body (including tissue, body fluids, etc.) is obtained. The hermetic packaging includes an electronic MEMS pressure sensor, power charging system, and bluetooth communication system to wirelessly measure variation of capacitance. The packaging was acquired by Quartz direct bonding and $CO_2$ laser welding, with a size of width $ 6cm{\times}length\;10cm{\times}lheight\;3cm$. Hermetic sealing of the packaged system was tested by changing the pressure in a hermetic chamber using a precision pressure controller, from atmospheric to 900 mmHg. We found that the packaged system retained the same count or capacitance values with sensor 1 - 25,500, sensor 2 - 26,000, and sensor 3 - 20,800, at atmospheric as well as 900 mmHg pressure for 5 hours. This result shows that the packaging method has perfect hermetic sealing in any environment of the human body pressure.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.1-6
• /
• 2019

In this paper, we have developed an app that can control IPTV - Miracast and the Internet with Android 7.0 on the embedded board. The app can be controlled by the remote control of IPTV and can receive TV when using IPTV. And Miracast and Embedded board are put into the power saving mode. When one mode is selected in this way, the other two modes enter the power saving mode and the power saving control technology is applied to reduce energy consumption. The board used in this paper was Android version 7.1.2 version of Raspberry pie 3B / B + and Asus Tinker board s, and Android Studio program was used to make the app and a synchronization control program was also developed to operate with IPTV remote control. The operation of the Android start program using the power saving power control technology and the remote control synchronization control program developed in this way is confirmed to be normal operation as a result of applying to the actual IPTV.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.8-17
• /
• 2010

Ubiquitous home refers not only to home but also to logical space, including a wide range of out-home personal devices such as mobile phones, PDAs, laptops, car navigators, and office PCs. There are certain connection barriers among the devices, such as the dynamic IP address, NAT. In a home network, various devices coexist in heterogeneous networks, such as IP, IEEE1394, PLC, Bluetooth, ZigBee, UWB, and IrDA, all of which lack interoperability due to their different physical transmission characteristics and protocols. In ubiquitous home where an unrestricted collaboration of the devices is essential to offer services that meet the users' requirements, free interoperability among the devices must be guaranteed. This paper proposes a networking model for interoperability of the heterogeneous devices in a ubiquitous home based on a virtual overlay network which hides the complicated physical network configurations and heterogeneity of the service protocols.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.24-33
• /
• 2011

This paper describes a gateway system based on a MOST network for integrating several different automotive network protocols. For transparent data communication among different protocols regardless of the high-level messages and the data format, Pseudo MOST frame was designed based on MOST frame and this pseudo MOST data frame is used as the data carrier. For automotive application, two types of gateways were developed, one board-type gateway and small-sized module-type gateways. One board-type gateway has ethernet port, video port and audio port. Meanwhile, small-sized module-type gateways are developed for video, audio, bluetooth and Flexray, respectively. Experiments with a network system using several small-sized module gateways verified efficient data communication among different network protocols and confirmed the effectiveness of the proposed gateway system for automotive network integration.