• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.270-271
• /
• 2015

Recently, There is Increasing interest in the intelligent services using the Internet of Things indoor positioning technologies that enable the communication of information between the objects. In particular Applications and demand for the indoor location based services using smart devices has made active. An indoor location positioning technology for this purpose BLE (Bluetooth Low Energy) has been a lot of interest in technology increases. If iBeacon of BLE(Bluetooth Low Energy) is made available to provide a signal for the indoor location information measurement then reliability of Indoor location information is lowered by signal interference. In this paper, Proposes a technique for data acquisition method for obtaining reliable position information and reliable position information calculation method from signal information data of iBeacon.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.925-932
• /
• 2015

In this paper, by utilizing the iBeacon is BLE (BlueTooth Low Energy) protocol devices that are supported by over the Bluetooth 4.0, and have implemented a system to improve the accuracy in the system for measuring the position of the user. After measuring through the system according to the state of the iBeacon, the interference factors are analyzed through analysis of the collected data, and applying the extended Kalman filter for calibration. Compared with the data after applying a filter with existing data, it was confirmed an increase in accuracy. Improvement techniques for providing the less complexity to the actual implementation, is effective in improving the accuracy of vulnerable services basic iBeacon.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.298-300
• /
• 2015

Beacon is a signal device, which mainly used to support the safety of the locate and operation of a watercraft and aircraft. Recently, the IT sector BLE (Bluetooth Low Energy) also made possible to operate with less energy over several months using a beacon standards are applied. In addition, the location-based services and technologies using BLE Beacon has attracted attention. However, there is the problem that by using only the position location Beacon devices when high error rate can be measured accurate position. Therefore, in this paper, combines WiFi and Beacon based on Smartphone. Also propose an indoor positioning algorithm reduces the error rate of the position location value.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.241-243
• /
• 2015

Recently, There is increasing interest in the IoT(Internet of Thing) as intelligent information service that enables communication between people and things based on internet. In particular the demand for indoor location-based services with the development of smart devices is rapidly increasing. If iBeacon of BLE(Bluetooth Low Energy) is made available to provide a basic signal for the indoor location information measurement then reliability of Indoor location information for unreliable signal data for a variety of reasons, such as signal interference is significantly lowered. In this paper, Proposes a technique for obtaining an effective and reliable location information via genetic operations in order to obtain reliable location information from the iBeacon signal information.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.352-354
• /
• 2016

Recent with the progress of smart devices, there is an increasing demand for indoor location-based services. For this reason, research on indoor positioning system using a iBeacon techniques added to BLE(Bluetooth Low Energy) specifications of Bluetooth4.0 has been actively. However, RSSI signal used for the measurement of the distance between the iBeacon and the receiving terminal has the problems of inaccurate distance measurement to environmental factors such as obstacles. In this paper, we propose an implemented indoor positioning technique to use filtering technology enhance the reliability of the RSSI signal and the broadcasting signal of the terminal access point function.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.55 no.6
• /
• pp.604-613
• /
• 2018

In this study, we analyzed the variations in the received signal strength index (RSSI) measured from Bluetooth beacons based on the strength and propagation direction of Bluetooth low energy (BLE) signal. Using a smartphone, we performed field experiments to investigate RSSI variations in the BLE signal transmitted by non-directional and directional beacons in an amethyst mine. In case of non-directional beacons, as the distance between the Bluetooth beacon and smartphone decreased, the RSSI increases, whereas as the BLE signal strength increased, the RSSI average gradually increased. The mean value of RSSI measured from the directional beacons was changed without relation to the facing angle between the Bluetooth beacon and smartphone. The results of this study can be used as basic data for developing a Bluetooth beacon-based proximity warning system for underground mines.

• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.287-294
• /
• 2017

This study attempted to develop a beacon scanner based ward monitoring service in order to respond to the new paradigm of medical environment which is trying to introduce ICT technology as medical service to track and manage the spread path of large infectious diseases such as MERS. The study also included beacon hardware development, firmware development for the beacon low-power bluetooth 4.0, and server and web-based dashboard UI development. Using these, we have developed a customized monitoring system that provides functions such as locating patients by location based service and monitoring based on web UI. It is possible to maximize the efficiency of offline hospital services and to value active infection control and patient safety by integrating online technology into the area where online technologies such as beacons are not properly integrated.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.552-557
• /
• 2015

Recent performed by recognizing a user's location, various services have been tailored focus on short-range wireless communication technology. A beacon in which is attracting attention as next-generation technology. Beacon is a terminal by utilizing the frequency of the non-audible area can not be bluetooth and human sending and receiving terminals and information, Apple recently iBeacon like a low-power Bluetooth (BLE; bluetooth low energy) based beacon showing a tendency to rise into the mainstream there. Services using a beacon is basically installs the terminal in a certain place indoor. It is characterized by providing the user the services to catch the user's position, even automatically take a separate action. Various types of location-based service provided by the target interior space began to attract attention. A variety of location-based services are provided in the interior space in order to be successfully deployed and provide guidance to the interior space, the movement route and the like are essentially required to build various types of information. In this paper, for efficient indoor positioning by varying the signal strength of the beacon in such areas were measured and analyzed.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.482-483
• /
• 2018

스마트폰을 중심으로 한 다양한 형태의 모바일 기기의 등장과 이를 기반으로 하는 사용자 중심의 위치 정보 서비스 기술은 지속적으로 발전하고 있으며, 관련된 모바일 서비스 시장의 규모 또한 매우 큰 폭으로 성장하고 있다. 특히, GPS(Global Positioning System)를 기반으로 하는 음식점 검색과 배달 음식 주문 모바일 어플리케이션은 많은 사용자를 중심으로 보편화되고 있다. 본 논문에서는 이와 같은 음식 주문과 관련하여 BLE(Bluetooth Low Energy Beacon)비콘을 사용한 실내 사용자 위치 정보 기반의 외식 매장용 모바일 서비스를 제안한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.345-347
• /
• 2016

Recently location based services is being expanded into the indoor service that can not access to the outdoor location informations, such as GPS. Thus, the research and development of an indoor positioning system with BLE(Bluetooth Low Energy) iBeacon technology has expanded. However, RSSI (Received Signal Strength Indicator) that is used as the distance information between the terminal and for positioning iBeacon signal has a problem in that distortion occurs, information such as the signal attenuation and the delay due to the characteristics of radio waves. In this paper, we propose a reliable method of verifying iBeacon signal with the signal distortion problems for reliable indoor positioning systems.