• 한국의류산업학회지
• /
• 제12권5호
• /
• pp.642-649
• /
• 2010

This study was designed to generate briefs pattern for women in their twenties using 3D parametric body model. 151 women in their 20's were random sampled and measured using Martine's anthropometry. And one subject was chosen as the representative subject for 3D scanning. Parametric model was generated of using CATIA P3, Unigraphics NX4.0, Rapidform 2006. And the 3D surface of parametric body model was flattened onto the 2D plane. 3 downscale ratios(0%, 10%, 15%) were applied to generated pattern to figure out what downscale ratio was suitable to make briefs with stretch fabric. 4 kinds of experimental briefs were made with stretch fabrics(0%, 10%, 15% downscale) and worn on the dressform. Subjective evaluation on the appearance was done and the data was analyzed by ANOVA with post-hoc test. Briefs pattern was generated through the process of flattening the parametric surface and arranging the patches to make briefs pattern by dart manipulation. The different ration of outline and area between 3D surface and 2D pattern were 0.22% and 0.09% respectively. It showed that a parametric model could provide a desirable pattern with minute size error. The results of subjective evaluation on the appearance of 4 experimental briefs showed that stretch briefs with 15% downscale ratio was evaluated most highly in most items. Findings imply that it is feasible to apply 3D parametric model to generate patterns for various items considering various fabric properties.

• 한국생활과학회지
• /
• 제16권4호
• /
• pp.801-811
• /
• 2007

This study attempts to propose a pattern design of snug fitting midi briefs for women. Each briefs made of two kinds of fabric, cotton 40's and cotton 40's spandex, was produced for the research in a different shrinkage rate. The result of wearing test of the briefs-sold-in-the-market (BSM) and the briefs-specially-made-for-this-research (BSMR) were as follows: BSMR showed a higher mark than that of BSM in the sense of close fit on the torso, comfortableness, sense of being tight, satisfaction and beauty. In particular, the back design line of BSM gave a lower satisfaction to test wearers, while that of BSMR gave a more comfortableness to them, making their hip comfortably being wrapped by making smoother the angle of the straight line linking sidelines with clutch part, and making sidelines into curve. In a forward research, further studies about grading and other patterns but midi pattern of briefs would be examined.

• 한국의류산업학회지
• /
• 제10권3호
• /
• pp.329-334
• /
• 2008

The purpose of this research is to develop the design, pattern and size system of brief as a measurement garment in order to obtain more precise silhouettes and sizes of the body in 3D measurements. The results of this research are as follows: First, nylon/lycra materials which elasticity is equivalent to 18%(wale) and 27%(course), were selected as a material for briefs to minimize possible error in measurement and deformation of body shape caused by looseness or tightness in its measured parts. And T-back style design was selected, of which briefs neither deform human body nor cause overlapping or excessive tightness when was put on the measurement garment over it. Second, different darts for men and women were adopted into the pattern in consideration for the shape of hip. Third, the waist band of briefs was located between the waistline and abdominal girth line so that it didn't interfere with measurement, and using a wide band of 40mm minimized the tightness of the human body. In addition, the stitch lines and sewing procedure were simplified to minimize the deformation of body shape resulting from inseams and stitch lines. Finally, for the size of briefs, 6 cm intervals were set on the basis of the waist girth and 8 kinds for men and 6 kinds for women were selected in descending order of appearance rate by the interval sections. English T meaning T-back design and numbers representing the waist girth were marked in parallel for the name of size.

• 한국의상디자인학회지
• /
• 제17권1호
• /
• pp.39-52
• /
• 2015

This study aims to analyze the characteristics of the male products for urinary incontinence by examining the types and characteristics of those registered in KIPO (Korean Industrial Property Office). Additionally, the types and characteristics, especially for the cloth products and the pads, of male panties for urinary incontinence on the market are analyzed. Men in their 60s with minor symptoms were selected as the subjects to evaluate the wearability. The results are as follows. 11 male products for urinary incontinence, registered in KIPO, are structurally different from those for women by having a separate pocket mainly for absorption. There are one disposable type and 7 cloth types, and the cloth panties can be classified as either united or separable type depending on the detachability of pads from the panties. The types of the panties vary according to the position, shape, and size of the attached pads on normal male panties (boxer, briefs, drawers). The fabrics for the urinary incontinence are usually piled in 3 to 5 layers by having the most absorptive layer on the top, the next with deodorizing characteristics, and the bottom with the waterproof fabric as basics with some additional layers of antibiotic or breathable fabrics. From the wearability test, it has been determined that the panties are not distinguishable in external appearance and the fitness is also not a problem since the size varies as the normal panties. It has been evaluated that the fitness of the panties is an important factor since the pad should be worn in any form; the pad sewed in the middle of the panties was evaluated to be more wearable than having a long pad. In case of separable panties, when the pattern and fabric is similar to the functional panties and the options such as the thickness of the pads or detachability are given to the users, it tends to be more satisfactory.