• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2874-2879
• /
• 2020

Due to excess reactivity, fresh nuclear fuel often contains burnable poisons. This research looks at six different burnable poisons and their impacts on reactivity, material attractiveness, and waste management. An MCNP simulation of a PWR fuel pin was performed with a fuel burnup of 60 GWd/MTHM to determine when each burnable poison fuel type would decrease below a k_∞ of 1. For determining the plutonium material attractiveness in each burnable poison fuel type, the plutonium isotopic content of the used fuel was evaluated using Bathke's Figure of Merit formula. For the waste management analysis, the thermal output of each burnable poison fuel type was determined through ORIGEN decay simulations at 100 and 300 years after being discharged from the core. The performance of all six burnable poisons varied over the three criteria considered and no single burnable poison performed best in all three considerations.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1367-1379
• /
• 2020

The small modular sodium-cooled fast reactor (SMSFR) is an important component of Generation-IV reactors. The objective of this work is to improve the reactivity control in SMSFR by using innovative systems, including burnable poisons and optimized control rods. SMSFR with MOX fuel usually exhibits high burnup reactivity loss that leads to high excess reactivity and potential fuel melting in control rod withdrawal (CRW) accidents, which becomes an important constraint on the safety and economic efficiency of SMSFR. This work applies two types of burnable poisons in a SMSFR to reduce the excess reactivity. The first one homogenously loads minor actinides in the fuel. The second one combines absorber and moderators in specific assemblies. The influence of burnable poisons on the core characteristics is discussed and integrated into the analysis of CRW accidents. The results show that burnable poisons improve the safety performance of the core in a significant way. Burnable poisons also lessen the demand for the number, absorption ability, and insertion depth of control rods. Two optimized control rod designs with rare earth oxides (Eu₂O₃ and Gd₂O₃) and moderators are compared to the conventional design with natural boron carbide (B₄C). The optimized designs show improved neutronic and safety performance.

• Nuclear Engineering and Technology
• /
• 제20권1호
• /
• pp.19-26
• /
• 1988

저누출 장전 모형은 새 연료를 안에서부터 넣는 in-out 형태를 취하여 격납 용기의 fluence를 줄이고 중성자 경제성을 높이고자 하는 것으로, 이 경우에는 노심내의 전체적인 중성자 경제성은 좋아지지만 노심 중앙부에서의 새연료의 과다 반응도 때문에 안전성 여유를 줄이게 되므로 많은 수의 가연성 독붕봉을 사용하여 첨두 인자를 조절해야만 한다. 본 논문에서는 가연성 독붕봉 연소에 따른 출력 변화를 섭동으로 취급하며, 이를 출력감도 계수(Power Sensitivity Coefficient)로 표시한다. 최적화된 가연성 독붕봉의 분포를 구하기 인하여 알고 있는 주기말상태로부터, 노심 내의 출력과 과다 반응도를 제어하면서 주기초로 추적해 나가는 역연소법(Reverse Depletion Method)의 도입에 대한 타당성을 출력 민감도 계수개념과 선형 계획법을 이용하여 원자력 7호기 제1주기에 응용하여 검증했으며, 가연성 독붕봉의 추정량과 실제량과의 차이는 최대 4.5%의 오차를 보였다.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.3095-3105
• /
• 2022

Solid Microencapsulated Fuel (SMF) is a type of solid fuel rod design that disperses TRISO coated fuel particles directly into a kind of matrix. SMF is expected to provide improved performance because of the elimination of cladding tube and associated failure mechanisms. This study focused on the neutronics and some of the fuel cycle characteristics of SMF by using OpenMC. Two kinds of SMFs have been designed and evaluated - fuel particles dispersed into a silicon carbide matrix and fuel particles dispersed into a zirconium matrix. A 7×7 fuel assembly with increased rod diameter transformed from the standard NHR200-II 9×9 array was also introduced to increase the heavy metal inventory. A preliminary study of two kinds of burnable poisons (Erbia & Gadolinia) in two forms (BISO and QUADRISO particles) was also included. This study found that SMF requires about 12% enriched UN TRISO particles to match the cycle length of standard fuel when loaded in NHR200-II, which is about 7% for SMF with increased rod diameter. Feedback coefficients are less negative through the life of SMF than the reference. And it is estimated that the average center temperature of fuel kernel at fuel rod centerline is about 60 K below that of reference in this paper.

• 에너지공학
• /
• 제5권2호
• /
• pp.146-152
• /
• 1996

열출력 108MW$_{th}$ 급의 소형 원자로심을 설계하였다. 설계 제한 조건으로 2년의 재장전 주기, 무붕산 운전, 저출력 밀도를 채택하였고, 핵연료의 설계는 울진 3 & 4호기의 핵연료집합체 사양을 그대로 채택하였다. 노심 출력준위 제어는 제어봉만으로 가능하도록 하였으며, CASMO-3와 KINS-3를 통해 설계된 초기노심이 주기길이, 첨두계수, 감속재 온도계수, 출력계수 등의 설계 한계치를 만족하는지 확인하였다. 설계 결과, 한국형 표준원전 핵연료집합체를 장전하는 유조선급의 선박용 소형원자로를 무붕산 운전 조건으로 설계 가능함을 알 수 있었다. 단 가연성 독봉을 축방향으로 농축도를 달리하여 장전할 필요가 있으며, 독봉과 제어봉을 설계 한계까지 사용하여야 함을 알았다. 충분한 정지 반응도를 얻기위해 3개의 제어봉군 이외에 추가적인 정지제어봉군이 노심 외곽에 배치되는 안이 제기되었다.