• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.768-777
• /
• 2020

In this paper, we describe recent research results on AODV routing protocol, which is widely deployed at mobile ad hoc networks, and AODV related routing protocols with multi-path routing schemes. We suggest the critical problems which minimum hop routing schemes have, such as AODV routing protocol, and then, propose a new C-AODV routing protocol with two routing metrics: the primary metric is the hop count, the secondary metric is the sum of link delay times. We implemented C-AODV protocol by modifying AODV at the NS-3, and thus, elaborate on how we change the original AODV source code of NS-3 in order to implement the C-AODV scheme. We show numerical comparison of C-AODV scheme with the original AODV scheme and then, discuss how much the C-AODV enhances routing performance over AODV protocol. In conclusion, we present future research items.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.191-198
• /
• 2007

A mobile ad-hoc network (MANET) is an autonomous, infrastructure-less system that consists of mobile nodes. In MANET, on demand routing protocols are usually used because network topology changes frequently. AODV, which is a representative on demand routing protocol, operates using the routing table of each node that includes next hop of a route for forwarding packets. It maintains the established route if there is not an expiration of route or any link break. In the paper, we propose a partially adaptive route maintenance scheme (AODV-PA) based on AODV, which provides dynamic route modification of initial route for selecting the effective route using not only next hop but also next-hop of next-hop (i.e. 2-hop next node) acquired through route discovery process. In addition, the proposed scheme additionally manages the routing table for preventing exceptional link breaks by route modification using HELLO messages. We use NS 2 for the computer simulation and validate that the proposed scheme is better than general AODV in terms of packet delivery ratio, latency, routing overhead.

• The KIPS Transactions:PartC
• /
• v.15C no.3
• /
• pp.213-220
• /
• 2008

A MANET is an autonomous, infrastructureless system that consists of mobile nodes. In MANET, on-demand routing protocols are usually used because network topology changes frequently. The current approach in case of broken routes is to flag an error and re-initiate route discovery either at the source or at the intermediate node. Repairing these broken links is a costly affair in terms of routing overhead and delay involved. Therefore, this paper propose a NAODV(Neighbor-aware AODV) protocol that stands on the basis of an AODV. It sets up the route rapidly if it operates for setting the route directly by using sequence number of neighbor nodes without re-search the route when the route to destination node is broken. Also, it reduces loss of packets. We use NS-2 for the computer simulation and validate that the proposed scheme is better than general AODV in terms of packet delivery ratio and average end-to-end delay. Also, when the proposed protocol is applied to the large ad-hoc network with multiple nodes, the performance is more efficient.

• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.429-436
• /
• 2005

A mobile ad hoc network (MANET) is a collection of mobile nodes without any fixed infrastructure or my form of centralized administration such as access points and base stations. The ad hoc on-demand distance vector routing (AODV) protocol is an on-demand routing protocol for MANETs, which is one of the Internet-Drafts submitted to the Internet engineering task force (IETF) MANET working group. This paper proposes a new multipath routing protocol called maximally disjoint multipath AODV (MDAODV), which exploits maximally node- and link-disjoint paths and outperforms the conventional multipath protocol based on AODV as well as the basic AODV protocol. The key idea is to extend only route request (RREQ) message by adding source routing information and to make the destination node select two paths from multiple RREQs received for a predetermined time period. Compared to the conventional multipath routing protocol, the proposed MDAODV provides more reliable and robust routing paths and higher performance. It also makes the destination node determine the maximally node- and link-disjoint paths, reducing the overhead incurred at intermediate nodes. Our extensive simulation study shows that the proposed MDAODV outperforms the conventional multipath routing protocol based on AODV in terms of packet delivery ratio and average end-to-end delay, and reduces routing overhead.

• The KIPS Transactions:PartC
• /
• v.13C no.4 s.107
• /
• pp.447-454
• /
• 2006

An ad-hoc network routing protocol, AODV(Ad-hoc On-demand Distance Vector) initially uses ERS(Expanding Ring Search) algorithm to control the RREQ(Route Request) retransmission in the route discovery process. Because ERS uses the fixed NTT(Node Travesal Time), it does not reflect accurately ad-hoc network environment. In this paper, we propose an improved ERS algorithm which lowers the retransmission rate. It uses RREP(Route Reply) and gives different weights in NTT of each node in accordance with the adjacency to an originating node. To show the effectiveness of the proposed algorithm, we perform a simulation using ns2. The simulation results showed that the proposed algorithm has better performance than existing algorithms.

• The KIPS Transactions:PartC
• /
• v.15C no.4
• /
• pp.303-310
• /
• 2008

To increase the lifetime of ad-hoc networks, a ratio of energy consumption for each node should be kept constant by equally distributing network traffic loads into all of the nodes. In this paper, we propose a modified AODV routing protocol to determine a possible route by considering a remaining battery capacity of a node and the degree of its usage. In addition, to reduce the amount of energy consumption during the path rediscovery process due to the huge amount of the AODV control messages the limited number of possible routes are stored into a routing table of a source node. When some links of a route fail, another possible path can be looked up in the table before the route discovery process should be initiated. We have tested our proposed method with a conventional AODV and a MMBCR method which is one of the power-efficient energy routing protocols based on the three performance metrics, i.e., the total remaining battery capacity, network lifetime and the ratio of data packets received by the destination node to compare their performance.

• The KIPS Transactions:PartC
• /
• v.14C no.1 s.111
• /
• pp.87-94
• /
• 2007

In mobile ad hoc networks the most popular on demand routing protocols are the Dynamic Source Routing (DSR) protocol and the Ad hoc On demand Distance Vector (AODV) routing protocol. These and other representative standard routing protocols are designed to find and maintain only a single path. Whenever there is a link break on the active route, source node has to invoke a route discovery process from the beginning and it causes a lot of overhead. Multipath routing protocols, which can alleviate these problems by establishing multiple alternative paths between a source and a destination, are widely studied. In this paper we propose a node disjoint multipath discovery technique based on AODV local route discovery. This technique can find and build completely separated node disjoint multi paths from a source to a destination as many as possible. It will make routing more robust and stable.

• The KIPS Transactions:PartC
• /
• v.14C no.5
• /
• pp.425-430
• /
• 2007

Without the aid of stationary infrastructure, maintaining routing information for all nodes is inefficient in the Mobile Ad hoc Networks(MANET). It is more efficient when every time routing information is necessary that the source node broadcasts a query message to neighbour nodes. The source node using Ad hoc On-Demand distance Vector(AODV), which is one of the routing protocols of MANET, uses the Expanding Ring Search(ERS) algorithm which finds a destination node efficiently. In order to reduce the congestion of the network, ERS algorithm does not broadcast Route REQuest(RREQ) messages in the whole network. When the timer expires, if source node does not receive Route REPly(RREP) messages from the destination node, it gradually increases TTL value and broadcasts RREQ messages. Existing AODV cost a great deal to find a destination node because it uses a fixed NODE_TRAVERSAL_TIME value. Without the message which is added in existing AODV protocols, this paper measures delay time among the neighbours' nodes by making use of HELLO messages. We propose Adaptive ERS(AERS) algorithm that makes NET_TRAVERSAL_TIME optimum which apply to the measured delay time to NODE_TRAVERSAL_TIME. AERS suppresses the unnecessary messages, making NET_TRAVERSAL_TIME optimum in this paper. So we will be able to improve a network performance. We prove the effectiveness of the proposed method through simulation.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.617-622
• /
• 2005

Lately, the MANET research has focused on providing routing services with security and previous schemes have been proposed for detecting malicious nodes in a MANET. However, they still include some problems which malicious nodes cannot be found when they falsely report other nodes as malicious. Accordingly, we propose a novel and efficient scheme for detecting malicious nodes using report messages and a report table which is consisted of node ID both for suspecting and reporting when the malicious nodes behave normally during the route discovery, but the other hand they drop and modify packets, or falsely report other nodes as malicious during the data transmission. Our proposed scheme is applicable to not only DSR but aiso AODV. And we provide some simulation results of our proposed scheme by comparing general AODV with our proposed scheme. Simulation results show that our Proposed scheme outperforms general AODV in terms of average packet loss ratio and packet delivery ratio.

• The KIPS Transactions:PartC
• /
• v.14C no.3 s.113
• /
• pp.229-238
• /
• 2007

Sensor networks consist of many tiny sensor nodes that collaborate among themselves to collect, process, analyze, and disseminate data. In sensor networks, sensor nodes are typically powered by batteries, and have limited computing resources. Moreover, the redeployment of nodes by energy exhaustion or their movement makes network topology change dynamically. These features incur problems that do not appear in traditional, wired networks. Security in sensor networks is challenging problem due to the nature of wireless communication and the lack of resources. Several efforts are underway to provide security services in sensor networks, but most of them are preventive approaches based on cryptography. However, sensor nodes are extremely vulnerable to capture or key compromise. To ensure the security of the network, it is critical to develop suity mechanisms that can survive malicious attacks from "insiders" who have access to the keying materials or the full control of some nodes. In order to protect against insider attacks, it is necessary to understand how an insider can attack a sensor network. Several attacks have been discussed in the literature. However, insider attacks in general have not been thoroughly studied and verified. In this paper, we study the insider attacks against routing protocols in sensor networks using the Ad-hoc On-Demand Distance Vector (AODV) protocol. We identify the goals of attack, and then study how to achieve these goals by modifying of the routing messages. Finally, with the simulation we study how an attacker affects the sensor networks. After we understand the features of inside attacker, we propose a detect mechanism using hop count information.