• Membrane and Water Treatment
• /
• v.4 no.4
• /
• pp.265-275
• /
• 2013

China is one of the countries with the highest reserves of coal bed methane (CBM) in the world. Likewise, the CBM industry is significantly growing in China. However, activities related to CBM development have led to more environmental problems, which include serious environmental damage and pollution caused by CBM-produced water. In this paper, the detailed characteristics of CBM-produced water in the southern Qinshui Basin were investigated and analyzed and compared with local surface water and coal mine drainage. Most of CBM-produced water samples are contaminated by higher concentration of total dissolved solids (TDS), K (Potassium), Na (Sodium) and $NH_4$. The alkalinity of the water from coalmines and CBM production was higher than that of the local surface water. The concentrations of some trace elements such as P (Phosphorus), Ti (Titanium), V (Vanadium), Cr (Chromium), Ni (Nickel), Zn (Zinc), Ge (Germanium), As (Arsenic), Rb (Rubidium), and Pd (Palladium) in water from the coalmines and CBM production are higher than the acceptable standard limits. The ${\delta}D$ and ${\delta}^{18}O$ values of the CBM-produced water are lower than those of the surface water. Similarly, the ${\delta}D$ values of the CBM-produced water decreased with increasing drainage time.

• Food Science of Animal Resources
• /
• v.39 no.3
• /
• pp.494-502
• /
• 2019

The quality characteristics and storage stability of chicken breast meat (CBM) was investigated following the injection of whey protein (WP) as a curing ingredient. The moisture content of CBM decreased with increasing concentration of WP. The highest concentration of WP (7%) resulted in the lowest moisture and fat content and the highest protein content of CBM. Injection of WP elevated the pH and water holding capacity (WHC) of CBM. The cooking loss of CBM was significantly decreased with WP injections of 3% and higher. All WP injections increased the $L^*$ of the CBM but decreased the $a^*$ and $b^*$. WP injection increased the springiness, cohesiveness, and chewiness and decreased the hardness of the CBM. WP injection increased 2-thiobarbituric acid reactive substances (TBARS) after 3 and 7 days of storage. The volatile basic nitrogen (VBN) content of the CBM increased with increased concentrations of WP. The total microbial count (TMC) of CBM injected with WP was higher initially and after 3 days of storage. Our results showed WP injection improved the WHC of CBM but decreased the storage stability by increasing TBARS, VBN and TMC.

• Journal of the Korean Society of Systems Engineering
• /
• v.18 no.1
• /
• pp.84-89
• /
• 2022

For system maintenance optimization, it is necessary to establish a state information system by CBM+ including CBM and RCM, and sensor selection for CBM+ application requires system process for function model analysis at the early design stage. The study investigated the contents of CBM and CBM+, analyzed the function analysis tasks and procedures of the system, and thus presented a D-FMEA based sensor selection inference methodology at the early stage of design for CBM+ application, and established it as a D-FMEA based sensor selection inference process. The D-FMEA-based sensor inference methodology and procedure in the early design stage were presented for diesel engine sub assembly.

• Journal of the Korean Institute of Gas
• /
• v.22 no.2
• /
• pp.34-45
• /
• 2018

The cleat system in coalbed methane (CBM) reservoirs is generally occupied by water which liberated during the coalification process, and behavior of water have influence on CBM production performance. Therefore, it is essential to investigate the effect of the water saturation to operate the degasification process and predict the CBM production performance properly. In this study, type curve analyses were performed on CBM reservoirs under various water saturation to improve the prediction of production performance. A CBM reservoir models with fully-, modestly-, and undersaturated reservoir were built to get production data using GEM by CMG Ltd., and the data were matched with Fetkovich, Palacio-Blasingame(P-B), and Agarwal-Gardner (A-G) type curve. The results showed that undersaturated reservoir was successfully matched by A-G type curve, while the Fetkovich type curve was inappropriate for matching in the late time. The modestly saturated model could be almost corresponded with all the type curve methods at late production period. For the fully saturated model, after peak production had been reached, both P-B and A-G methods showed a proper match to the reservoir production data without long-term production period. Based on the results, merit and demerit of each type curve under specific water saturation were analyzed and listed. Therefore, it is believed that the production data analysis with proper type curve model considering water saturation can be performed to predict accurate production performance.

• Economic and Environmental Geology
• /
• v.48 no.1
• /
• pp.65-75
• /
• 2015

The CBM(Coalbed Methane) development technology being developed in mid 1980s is the technology to produce the methane gas absorbed in the coal bed. CBM is easy to be developed and its coal deposit is abundant. Therefore, the CBM industry has a large potential as an energy source as well as to deal with the global regulations for reducing greenhouse gas emission. In order to produce coal, the CBM should first be developed as a preliminary action for mine security. So CBM is advantageous in reducing the global greenhouse gas as well as its advantage not being influenced by the changes in gas market. The ECBM (Enhanced Coalbed Methane) is a new technique producing the methane gas which is substituted and disorbed from coal by injecting $CO_2$ or $N_2$ gas into a coal bed. Especially, $CO_2$-ECMB is a low-carbon, green-growth technology, so can expect to the effect of green gas reduction as well as the improved productivity of methane gas. CBM technology is being developed in about 40 nations including Canada, Australia, China, India, Indonesia and Viet Nam, and the coal output using this technology is continually being increased. The CBM is expected to contribute in changing the energy source paradigm from current coal & petroleum energy to unconventional gas.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.6
• /
• pp.925-933
• /
• 2011

The traditional feedstock for dimethyl ether (DME) has been natural gas obtained by pipeline from a nearby natural gas or oil field. This report focuses on other feedstock: Coal bed methane (CBM). The resource availability and suitability of CBM for DME manufacturing have been investigated. CBM in a short time has become an important industry, providing an abundant clean-burning fuel and also suggesting as a feedstock for gas industry. The use of CBM will have very little impact on the KOGAS' DME process design and economics up to 50 vol% of $CO_2$ in the CBM source. Many of the CBM sources in Asia are high in $CO_2$, but pose no difficulties for the KOGAS' DME plant. Since tri-reformer requires substantial $CO_2$ in its feed, no $CO_2$ removal from the CBM feed is needed. The $CO_2$ in the CBM means that less $CO_2$ needs to be recycled from the downstream in the process.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.2
• /
• pp.294-303
• /
• 2024

The objective of condition-based maintenance plus(CBM+) is to improve the availability and maintenance efficiency of missiles, bolstering national defense capabilities. This study proposes an application of CBM+ to enhance the reliability and the safety of missiles, which are the devices typically stored for long durations. CBM+ CBM+ does not only contribute to defense capabilities, but it also aims to reduce maintenance costs. This study focuses particularly on the dormant stage of the missile life-cycle, in which various failure modes and environmental impacts on failure mechanisms are investigated. The effectiveness of maintenance strategies and the implementation of CBM+ is evaluated using simulation data.

• Economic and Environmental Geology
• /
• v.46 no.4
• /
• pp.351-358
• /
• 2013

Methane burns more clearly than any other fossil fuels. Coalbed methane(CBM) is natural gas contained in coal beds. This gas is usually producted from coal that is either too deep or too poor-quality to be mined commercially. While global coalbed methane resource estimates are rough, they indicate between 84 and 377tcm, which compares with proven natural gas reserves of 180tcm. Coalbed methane resources are currently only produced on a major scale in the United States, Canada, Australia and China. In this study, we analysed total 109 published papers for the CBM during the 1990~2012 periods by the programs of 'web of science'. The results of analysis, the CBM study led by the United States, the follow India and Australia. In subject area(web of sciences), Energy Fuels is 57, Engineering 58 and Geology 41 papers, respectively.

• Microbiology and Biotechnology Letters
• /
• v.35 no.1
• /
• pp.73-80
• /
• 2007

Biofilm media was equipped in two-compartmented wastewater treatment bioreactor which was separated by porcelain septum. DC 2.0 volt of electric potential was charged to anodic (oxidative) biofilm media (ABM) to induce oxidation potential but not to that of carbon (neutral) biofilm media (CBM) that was used for control test. Biofilm structure, biomass variation, Off variation and wastewater treatment efficiency in the bioreactor equipped with ABM (ABM-bioreactor) and CBM (CBM-bioreactor). Time-coursed variation of biofilm structure forming on surface of ABM and CBM was observed by scanning electron microscopy. The biofilm growing on ABM was dispersed on surface and was not completely covered the media but the biofilm growing on CBM was continuously increased and finally covered the media. The ORP of CBM was decreased to 100 mV, which was reciprocally proportional to the biomass growth. However, the ORP of ABM was about 800 mV, which was maintained during operation for about 60 days. The treatment efficiency of COD in the ABM bioreactor was 2 times higher than those in the CBM bioreactor. From these results, we proposed that electrochemical oxidation potential charged to biofilm media may inhibit formation of biofilm extremely condensed and activate bacterial cell metabolism.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.2
• /
• pp.315-323
• /
• 2015

The weld scallop has been used for joining T-bars. There are a lot of weld scallops in shipbuilding. It is difficult to perform scallop welding due to the inconvenient welding position. This results in many problems such as porosity, slag inclusion, etc. In this study, a new method is devised to remove weld scallops by incorporating a Ceramic Backing Material (CBM). The weld scallop is removed by an elongation of the v groove. In order to insert a CBM into the groove without a weld scallop, a wedge-shaped CBM is developed. The top side of the developed CBM is similar to the shape of a general back bead. The bottom surface has a saw-toothed shape for cutting at a suitable length. This can be attached to the root side of a face plate using adhesive tape, just like a general CBM. Welding experiments in normal and abnormal conditions are carried out and the possibility of burn-through is examined. This CBM's applicability to shipbuilding is verified.